• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1073-1081
• /
• 2001

Many researches have published numerous papers about the high-strain-rate obtained from Split Hopkinson Pressure Bar(SHPB) tests. And 6.5wt%Si steel is widely known as an excellent magnetic material because its magnetostriction is nearly zero. Single crystals are prepared by the Floating Zone(FZ) method, which melts the alloy by the use of a high temperature electron beam in a pure argon gas condition. In this paper, the fracture behavior of the poly crystals and single crystals (DO$_3$phase) of Fe-6.5wt%Si alloy by SHPB test is observed. The comparison of high-strain-rate results with static results was done. Obtained main results are as follows: (1) Fe-6.5wt%Si alloy has higher strength at high-strain-rate tensile. SHPB results of polycrystal are twice as high as static results. (2) From the fractography, the cleavage steps are remarkably reduced in the SHPB test compared with the static test.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.359-363
• /
• 2011

초음속풍동에서 사용하는 압력 probe의 형상에 따른 압력특성에 대하여 분석하였다. 초음속풍동의 성능을 평가할 때 시험부의 벽면정압력과 전방안정실의 전압력을 측정하고 그 비로 마하수를 계산한다. 또한 쉴리렌 가시화를 통하여 유질의 상태를 확인한다. 그러나 매우 빠른 초음속 영역에서는 경계층의 영향을 무시할 수 없기 때문에 시험부의 압력을 측정하는데 한계가 있다. 따라서 시험부의 유질이 균일한지 확인을 위해 다양한 위치에서 압력을 측정하기 위한 probe가 필요하다. 본 논문에서 몇 가지 피토형상에 대해서 실험을 진행했고, 그 결과를 비교 분석했다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.53-56
• /
• 2008

일반적으로, 고체로켓모타에 대한 지상연소시험을 실시할 경우, 연소관 내부의 압력을 계측하기 위해 압력 계측용 배관에 기름을 채우고 그 끝에 압력센서를 연결하여 사용한다. 통상적으로 사용되어지는 이 방법은 지상연소시험을 실시할 경우에는 특별한 문제가 되지 않으나, 고고도 환경에서 점화되는 고체로켓모타의 압력계측은 배관 기름의 누출로 인한 점화성능 저하가 문제시된다. 이는 배관의 부착 위치가 통상적으로 전방 점화기 부위인 것에 기인한 것이며, 이러한 문제를 해결하기 위하여 본 논문에서는 기름을 사용하지 않는 압력배관을 어떻게 설계하고 검증하였는지에 대해 기술하도록 하겠다.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.63-68
• /
• 2017

This paper predicts the rotordynamic force coefficients of tilting pad journal bearings (TPJBs) with ball-socket pivot and compares the predictions to the published test data obtained under load-between-pad (LBP) configuration. The present TPJB model considers the pivot stiffness calculated based on the Hertzian contact stress theory. Due to the compliance of the pivot, the predicted journal eccentricity agree well with the measured journal center trajectory for increasing static loads, while the early prediction without pivot model consideration underestimates it largely. The predicted pressure profile shows the significant pressure development even on the unloaded pads along the direction opposite to the loading direction. The predicted stiffness coefficients increase as the static load and the rotor speed increase. They agree excellently with test data from open literature. The predicted damping coefficients increase as the static load increases and the rotor speed decreases. The prediction underestimates the test data slightly. In general, the current predictive model including the pivot stiffness improves the accuracy of the rotordynamic performance predictions when compared to the previously published predictions.

• 동력기계공학회지
• /
• 제7권1호
• /
• pp.68-73
• /
• 2003

The purpose of this study is to develop a new proportional pressure reducing valve and to verify the validity of a new mechanism with pressure control pin. The dynamic characteristics of the object pressure reducing valve was studied by numerical analysis of the mathematical model. Also, static and dynamic characteristics of the new pressure control valve were tested with a testing system based on the test standard.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.189-193
• /
• 2008

A Control variables of explosion pressure in enclosure are a type of explosive gas, concentration of mixture, open area in enclosure. In this study, be performed to test inner explosion pressure of Blast Proof Door by the control variables of explosion pressure. and this real explosion test of Blast Proof Door have a good point in test of the against pressure method that can be obtained dynamic pressure or not static pressure.

• 대한정형도수물리치료학회지
• /
• 제23권2호
• /
• pp.27-32
• /
• 2017

Background: The purpose of this study was to compare the effects of IASTM and static stretching techniques on ankle joint range of motion (ROM), static foot pressure. Methods: Twenty four subjects with gastrocnemius shortness participated in this study. The subjects were assigned randomly to one of two groups: The soft tissue mobilization technique (IASTM) group received intervention using a IASTM instrument for two minutes, and the stactic stretching group performed self stretching for 30 seconds, four times. The ROM of the ankle joint was measured by active ankle dorsi-flexion test, and a TPScan was utilized to collect the plantar foot pressure. This experiment was performed by two physical therapists. The significant level was set at ${\alpha}=.05$. Results: The results were as follows: 1) The ROM of the ankle joint and was significantly increased in both groups. 2) Plantar foot pressure was no significant in both groups. 3) There were no significant differences between the IASTM group and static stretching group for any variable. Conclusions: The results of this study suggest that static stretching is an effective and easy technique for restoring proper muscle length in subjects with gastrocnemius shortness. We recommend that static stretching technique be used for treat gastrocnemius shortness in clinical setting and home program.

• 대한통합의학회지
• /
• 제9권1호
• /
• pp.41-48
• /
• 2021

Purpose : The purpose of this study is to find out if it helps to improve static balance ability and weight bearing rate for chronic stroke patients with poor balance in clinical intervention through a method of correcting movement errors while performing a task by vibrotactile bio-feedback providing pressure information. Methods : Fifteen chronic stroke patients (12 male and 3 female) were participated in this study. To examine the effects of vibrotactile bio-feedback and general standing without bio-feedback on static balance ability and weight distribution symmetric index in all subjects randomized with R Studio. The static balance ability and weight distribution symmetric index of the participants was evaluated using a force plate. A paired t-test was used for comparison of each conditions. Statistical significance was set at α=0.05. Results : The comparisons of static balance ability and weight distribution symmetric index in chronic stroke patients after two different condition are as follows. In the static balance ability and weight distribution symmetric index, the vibrotactile feedback providing pressure information showed a significant difference compared to none feedback (p<.001). Conclusion : The vibrotactile bio-feedback providing pressure information in real time can support an improve in static balance ability, uniform weight bearing rehabilitation in chronic stroke patients. In the future, it is hoped that a follow-up study that provides a better direction of intervention compared to various feedback interventions commonly used in clinical practice.

• 대한기계학회논문집B
• /
• 제22권9호
• /
• pp.1195-1207
• /
• 1998

Periodic pulsations in the static pressure near turbine surfaces as blade rows move relative to each other is one of the important sources of turbine unsteadiness. The present experiment aims to investigate the effect of the static pressure pulsations on the interaction of film coolant flows from two rows of staggered holes with mainstream and its effect on film cooling heat transfer. Potential flow pulsations are generated by the rotating shutter mechanism installed downstream of the test section, The free-stream Strouhal number based on the boundary layer thickness is in the range of 0.033 - 0.33, and the amplitude of about 10-20%. Measured are time-averaged and phase-averaged velocity variations, pressure variations and temperature distributions of the flow field. Experimental conditions are identified by boundary layer measurements. Injectant behavior is characterized by the measurements of unsteady pressure in the plenum chamber and free-stream static pressure. The film cooling effectiveness is evaluated from the insulated wall temperature measurement. It has been found that bulk flow pulsation provides very large diffusion of the injectants and the effectiveness is significantly reduced by the flow pulsations.

• The Journal of Korean Physical Therapy
• /
• 제29권3호
• /
• pp.142-144
• /
• 2017

Purpose: Few studies have addressed the effect of diurnal circadian rhythms on postural stability, and thus the aim of the present study was to examine circadian effects on static and dynamic postural stability in young adults. Methods: Twenty-four subjects (9 men, 11 women: age=$22.20{\pm}1.77$, height=$167.20{\pm}10.47$, weight=$59.85{\pm}10.66$) from a university community volunteered for this study. Static and dynamic balance testing, which recorded using a Good Balance system (Good Balance, Metitur Ltd, Finland) was conducted at 9:00, 13:00, and 17:00 hours on two consecutive days, and the sequencing of static and dynamic balance tests were randomized. Results were analyzed using the non-parametric one-way repeated Friedman test in SPSS version 18.0 (SPSS Inc., Chicago, IL, USA), and variable found to be significant were subjected to Wilcoxon post hoc testing. Results: Static and dynamic balance showed significant difference at the three times assessments (test at 9:00, 13:00, and 17:00) during circadian. In the post hoc test of static (anteroposterior distance, mediolateral distance and COP (center of pressure) velocity) and dynamic balance (performance time), 13:00 was the longer and faster than 9:00. Conclusion: These results indicated that control of postural balance is influenced by diurnal circadian rhythms, and confirm that control of postural balance is more effective and better performance in the 09:00 hours than 13:00 hours or 17:00 hours.