• Journal of Biomedical Engineering Research
• /
• v.35 no.4
• /
• pp.105-110
• /
• 2014

For the combination of MRI and magnetic particle hyperthermia(MPH), we investigated the relative heating efficiency with respect to the strength of the static magnetic field under which the magnetic nanoparticles are to be heated by RF magnetic field. We performed nanoparticle heating experiments at the fringe field of 3T MRI magnet with applying the RF magnetic field perpendicularly to the static magnetic field. The static field strengths were 0T, 0.1T, 0.2T, and 0.3T. To prevent the coil heat from conducting to the nanoparticle suspension, we cooled the heating solenoid coil with temperature-controlled water with applying heat insulators between the solenoid coil and the nanoparticle container. We observed significant decrease of heat generation, up to 6% at 0.3T(100% at 0T), due to the magnetic saturation of the nanoparticles of 15 nm diameter under the static field. We think MPH is still feasible at low magnetic field lower than 0.3T if stronger RF magnetic field generation is permitted.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.14-22
• /
• 2017

The NMR's probe consists of the static magnetic field generator (magnetic source) and the RF coil. It is very strict for the homogeneity of the static magnetic field intensity of the magnetic source, so the cost of the magnetic source is more expensive in the entire nuclear magnetic resonance instrument. The magnetic source generally consists of electromagnet, permanent magnet and superconducting magnet. The permanent magnet basically needs not to spend on operation and maintenance and its cost of manufacture is much cheaper than the superconducting magnet. Therefore, the permanent magnet may be the only choice for the static magnetic field device if we want to use the magnetic resonance instrument as an analyzer for production by reducing price. A new probe magnet was developed on the basis of the permanent magnet ring in this paper to provide a technological way for reducing the manufacturing cost, weight and volume of the existing nuclear magnetic resonance instrument (including MRI) probe.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.38-51
• /
• 2007

This paper describes research results for the measurement and analysis method of magnetic signatures generated from the ship's magnetic mock-up model. In this paper, we present the theoretical and experimental techniques for the separation of the permanent and the induced magnetic field from the measured magnetic signature of the mock-up model. Also, we describe the prediction method of the induced magnetic field generated from mock-up model using the Magnet s/w, one of the FEM analysis tools for the electro-magnetic field and the magnetic dipole modelling method based on the least square techniques. The proposed modelling and analysis methods can be used for the prediction and the analysis of the static magnetic field generated from the real naval ship as well as the mock-up model.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.242-242
• /
• 2002

The Earth's magnetic field acquired from KOMPSAT-1's TAM (Three-Axis Magnetometer) between June 19th and 21st 2000 was analyzed. The TAM, one of the KOMPSAT-1's Attitude and Orbit Control Subsystems, plays an important role in determining and controlling the satellite's attitude. This also can provide new insight on the Earth's magnetic field. By transforming the satellite coordinate from ECI to ECEF, spherical coordinate of total magnetic field was achieved. These data were grouped into dusk (ascending) and dawn (descending) data sets, based on their local magnetic times. This partitioning is essential for performing 1-D WCA (Wavenumber Correlation Analysis). Also, this enhances the perception of external fields in the Kompsat-1's TAM magnetic maps that were compiled according to different local. The dusk and dawn data are processed independently and then merged to produce a total field magnetic anomaly map. To extract static and dynamic components, the 1-D and 2-D WCAs were applied to the sub-parallel neighboring tracks and dawn-dusk data sets. The static components were compared with the IGRF, the global spherical harmonic magnetic field model. The static and dynamic components were analyzed in terms of corefield, external, and crustal signals based on their origins.

• Journal of the Korean Magnetics Society
• /
• v.17 no.6
• /
• pp.259-264
• /
• 2007

This paper describes the mathematical modeling method for the static magnetic field signature generated by a magnetic scale model. we proposed the equivalent dipole modeling method utilizing a singular value decomposition technique from magnetic field signatures by magnetic sensors are located special depths below the scale model. The proposed dipole modeling method was successfully verified through comparisons with the real measured values in our non-magnetic laboratory. Using the proposed method, it is possible to predict and analyze static magnetic field distributions at any difference depths generated from the real ships as well as a scale model ship.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.833-837
• /
• 2006

To determine whether alcohol-treated rat liver cells can be protected by a static magnetic field (SMF), we analyzed the blood chemistry and histology of hepatic tissue removed from alcohol-exposed rats that had been exposed to a static magnetic field. The rats were exposed to a 0.3 tesla (3,000 gauss) magnetic field (MF) for 24 hr daily for 5 weeks with appropriate controls. Glutamic pyruvic transaminase activity and the triglyceride levels in animals exposed to the north (N) or south (S) pole of the MF decreased significantly (p<0.01 and p<0.05, respectively) compared with negative control animals with alcohol exposure. A histological examination of hepatic tissue revealed a moderate to severe accumulation of fat vacuoles of various sizes in the cytoplasm of the hepatocytes of animals in the negative control group throughout the study; whereas in groups exposed to the MF poles, fewer fat vacuoles were seen compared with the negative control group. Electron microscopic observations showed that exposure to the N or S pole protected organelles, including the nucleus, from damage during exposure to this toxic agent, as indicated by the fact that the nucleus and the mithochondria virtually retained their shape throughout this study. These results suggest that exposure to a SMF could be an excellent way of protecting against alcohol-induced damage to the rat liver cell.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.623-632
• /
• 1997

The purpose of this study was to evaluate the effects of magnetic field on cellular activity of MC3T3-E1 cells. The cellular activity was monitored by alkaline phosphatase and DNA synthetic activity in control, static magnetic field and pulsed electromagnetic field groups. A static magnetic field was applied to the cell by placing one, two, three, foue, and five samarium-cobalt magnets above and below each cell plate for 24hours per day. A pulsed electromagnetic field with a frequency of 100 herz was applied for 10 hours per day. After 10 days of magnetic field exposure, there were increase of alkaline phosphatase activity in static magnetic field groups consisted of one, two and three magnetic groups. Alkaline phosphatase activities were not significantly increased in four and five magnetic groups. Application of pulsed electromagnetic field did not result in significant increase in alkaline phosphatase activity compared to control. DNA synthetic activity in both static and pulsed electromagnetic field group were not significantly different from that in control group. The result of this study suggest that magnetic field could have effect on the metabolism of bone cells related to the cellular metabolic process.

• Journal of the Korean Society of Safety
• /
• v.22 no.6
• /
• pp.87-90
• /
• 2007

The effects of static magnetic field on the human biological system are becoming increasingly more important with the adaption of static magnet in the medical community. It is the goal of this paper to review the effects of static magnetic fields on oxygen saturation level in blood. The results of this paper show that the oxygen saturation level increased in the blood in index finger when the static magnetic dipole was fitted on index finger.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1473-1480
• /
• 2008

Bisumus has a low melting point, making it easier to handle. This allows us to test what type of effect diamagnetism has on electro static and magnetic field shields. However, the actual materials for experimentation have only ever been manufactured cylindrically, and so there have been no recorded cases of measurements to this effect. To understand what kind of effect pure bisumus as diamagnetism has on electro static and magnetic shields in comparison to other materials, bisumus, along with copper, aluminum and iron 스텐도, were used to make a cylinder each. These cylinders were then used to measure and compare the electro static shield and magnetic shield at different bands of frequencies, starting from a low frequency. As shown on the graph/chart/diagram, the best results were recorded for copper and bisumus as diamagnetism in an electro static field. In terms of magnetic shielding, iron provided the best results, as expected, whereas bisumus displayed minimal effect.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.575-585
• /
• 2015

Magnetic field in magnetic bearings is the physical medium to realize magnetic levitation, the distribution of the magnetic field determines the operating performance of magnetic bearings. In this paper, a thin-slice Fiber Bragg Grating-Giant Magnetostrictive Material magnetic sensor used for the air gap of magnetic bearings was proposed and tested in the condition of dynamic magnetic field. The static property of the sensor was calibrated and a polynomial curve was fitted to describe the performance of the sensor. Measurement of dynamic magnetic field with different frequencies in magnetic bearings was implemented. Comparing with the finite element simulations, the results showed the DC component of the magnetic field was detected by the sensor and error was less than 5.87%.