• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.615-620
• /
• 1998

The objective of this experimental study is to investigate the hysteretic behavior of reinforced concrete piers subjected to quasi-static cyclic loads, which have been used in large numbers for railway and urban transportation facilities. Important test parameters are hoop ratio, axial load, loading type, and the behaviors f members have been evaluated through limit states of crack occurrence, yielding and ultimate state of member, ductility and load-deflection loop can be secured by considering the influence of hoop reinforcement ratio and axial load, and that plastic hinge length and ductility ar determined by the combination of the quantities of hoop reinforcement and axial load.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.357-366
• /
• 2008

본 연구는 교량 신축이음에 대해서 윤하중 재하실험을 통해 윤하중 재하 특성을 분석하고 이를 토대로 신축이음에서의 윤하중 재하기준을 마련하는 기초데이터를 확보하고자 실시하였다. 이를 위해 국내에서 많이 사용되고 있는 레일신축이음과 핑거신축이음에 대하여 시험체를 제작하고 실제 타이어 바퀴를 사용한 정적 윤하중 재하실험을 실시하였다. 윤하중에 접촉된 레일과 핑거에서 윤하중 분배율을 파악하였는데, 레일신축이음에서 중앙 레일이 지지하는 분담율은 윤하중 크기가 증가함에 따라 감소하는 것으로 나타났고 핑거신축이음에서는 접촉 면적 증가에 따라 거의 증가하지 않고 일정하게 됨을 알 수 있었다. 윤하중 재하 특성이 기존 설계기준과 많은 차이를 나타내고 있으므로 신축이음 설계를 위한 윤하중 접지압력 분포에 대한 합리적인 기준 마련이 필요하다고 판단되었다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.73-80
• /
• 2017

PURPOSES : This paper presents a comparison study between dynamic and static analyses of falling weight deflectometer (FWD) testing, which is a test used for evaluating layered material stiffness. METHODS: In this study, a forward model, based on nonlinear subgrade models, was developed via finite element analysis using ABAQUS. The subgrade material coefficients from granular and fine-grained soils were used to represent strong and weak subgrade stiffnesses, respectively. Furthermore, the nonlinearity in the analysis of multi-load FWD deflection measured from intact PCC slab was investigated using the deflection data obtained in this study. This pavement has a 14-inch-thick PCC slab over fine-grained soil. RESULTS: From case studies related to the nonlinearity of FWD analysis measured from intact PCC slab, a nonlinear subgrade model-based comparison study between the static and dynamic analyses of nondestructive FWD tests was shown to be effectively performed; this was achieved by investigating the primary difference in pavement responses between the static and dynamic analyses as based on the nonlinearity of soil model as well as the multi-load FWD deflection. CONCLUSIONS : In conclusion, a comparison between dynamic and static FEM analyses was conducted, as based on the FEM analysis performed on various pavement structures, in order to investigate the significance of the differences in pavement responses between the static and dynamic analyses.

• 항공우주시스템공학회지
• /
• 제15권4호
• /
• pp.40-46
• /
• 2021

At launch, satellites are exposed to various types of structural loads, such as quasi-static loads, sinusoidal vibrations, acoustic/random vibrations, and shocks. The launch environment test is aimed at verifying the structural stability of the test object against the launch environment. Various types of launch environments are simulated by simple vibration, acoustic, and shock tests considering possible test conditions in ground. However, the difference between the launch environment and the test environment is one of the causes of excessive testing. To prevent overtesting, a notching technique that adjusts the frequency range and the input load considering the design load is applied. For notching, specific procedures are established considering the satellite development concept, selected launch vehicle, higher system requirements, and test target level. In this study, the notching method, established procedure, and development of a notching toolkit for efficient testing are described.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.228-233
• /
• 2004

A derailment coefficient of railway vehicle is as one of important element that estimate running safety. Derailment coefficient is ratio of lateral load/vertical load happens in contact point between wheel and rail. Lateral load increases, dangerous of derailment can rise. There are ground and vehicle to measurement method of these derailment coefficient. Method of ground is simple, but when vehicles passes data of a point, there is shortcoming that acquire locally. Curved surface style wheel shape that use so far among vehicle method in this research wishes to be not but describe about static load test of wheel-set for derailment coefficient measurement that have plane plate shape that manufacture separate way and correction result etc. to test.

• 한국재난정보학회 논문집
• /
• 제6권1호
• /
• pp.140-152
• /
• 2010

In designing a railroad bridge, the fatigue is one of the main factors to be considered for ensuring safe operation. Especially, for a new type of a structural member, which has not been adopted to railroad bridges, the fatigue performance should be checked. In this paper, the fatigue characteristics of an IT girder are examined. The IT girder is a new type of a prestressed concrete girder which has two prestressed H-beams in the top of the girder to give the girder additional sectional capacity. To obtain the fatigue performance, a 10m IT girder specimen is designed, and a repeated load test is performed by applying the load cyclically two million times. The magnitude of the repeated load is determined considering the stress level under the service condition. During the test, static load tests are performed to identify the stiffness degradation. The fatigue performance of the girder is checked according to the Japanese and the CEB-FIB design codes. The fatigue test result shows that the IT girder satisfies both design codes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.979-984
• /
• 2001

The Sang-Jin bridge constructed by the Free Cantilever Method in 1985 is 4-span concrete rahmen bridge with a hinge at midspan. Due to the effect of creep, shrinkage of concrete and relaxation of tendon, the Sang-Jin bridge exposed the excessive displacement at midspan with the passage of time. In order to improve the load-carrying-capacity and durability of the bridge, needs to repair and rehabilitate the structure emerged. New rehabilitation methods were applied such as external prestressing of concrete box, application of pier pre-camber and steel truss jacking. Structural analysis and several tests including static load test, dynamic load test and ambient vibration test were executed to verify the improvement. The test result showed that the displacement of the midspan was improved by 10mm and it was verified that the stiffness of the bridge was increased. Totally, the load-carrying-capacity of Sang-Jin bridge was increased at least 1.56times which was attributed to the new rehabilitation method.

• 지질공학
• /
• 제19권4호
• /
• pp.441-457
• /
• 2009

본 연구는 국내 외의 사질지반에 시공된 타입말뚝에 대해 파괴가 현저하게 나타날 때까지 재하한 정재하시험 실측값을 이용하여 극한하중 항복하중 침하량기준의 각각 판정법으로 극한하중을 추정하였다. 추정된 극한하중을 실측된 파괴하중으로 정규화하고 말뚝특성에 따라 판정법별 비교 분석 하였다. 또한 극한하중 추정시 적합한 판정법을 검토하고 허용하중 결정시 안전율을 재평가하여 다음과 같은 결론을 얻었다. 극한하중 판정법으로 구한 극한하중은 Chin 방법에 의해 해석된 값이 실측값 보다 과대평가하는 경향을 나타냈으며 B. Hansen 80%기준과 Stability Plot 방법이 실측치와 거의 일치하여 가장 신뢰성이 있는 방법으로 판단되었다. 허용하중 산정시 극한하중 판정법에 의해 구한 파괴하중에 적용해야 할 안전율을 구조물기초설계기준에 적용된 안전율을 기준으로 환산하면 B. Hansen 90% 방법을 제외하고 3.0보다 큰 값이 적용되어야 할 것으로 판단되었으며 항복하중 판정법들의 경우 기준안전율 2.0보다 큰 값이 적용되어야 할 것으로 판단되었다. 침하량 기준에 의해 구한 하중에 적용해야 할 안전율을 극한하중에 대한 안전율 3.0을 기준으로 환산해 보면, 전침하량 기준 및 순침하량 기준은 3.0보다 작은 값이 적용되어야 할 것으로 판단되었다.

• Structural Engineering and Mechanics
• /
• 제33권6호
• /
• pp.765-779
• /
• 2009

Quantitative condition assessment of structures has been traditionally using proof load test leading to an indication of the load-carrying capacity. Alternative approaches using ultrasonic, dynamics etc. are based on the unloaded state of the structure and anomalies may not be fully mobilized in the load resisting path and thus their effects are not fully included in the measured responses. This paper studies the effect of the load carried by a reinforced concrete beam on the assessment result of the crack damage. This assessment can only be performed with an approach based on static measurement. The crack damage is modelled as a crack zone over an area of high tensile stress of the member, and it is represented by a damage function for the simulation study. An existing nonlinear optimization algorithm is adopted. The identified damage extent from a selected high level load and a low load level are compared, and it is concluded that accurate assessment can only be obtained at a load level close to the one that creates the damage.

• 대한토목학회논문집
• /
• 제29권4C호
• /
• pp.145-151
• /
• 2009

일반적으로 풍화암에 근입된 현장타설말뚝은 지지력이 매우 크므로 많은 경우에 설계하중만을 검증한 다음 극한하중을 확인하기 전에 재하시험을 종료한다. 그러나 만일 미완성 하중-침하 곡선으로부터 신뢰할 수 있는 극한하중의 예측이 가능하다면 설계의 질적인 향상뿐만 아니라 경제적인 면에서도 크게 기여를 할 수 있을 것이라고 생각된다. 본 연구의 목적은 극한하중을 얻지 못한 말뚝 재하시험의 하중-침하 곡선으로부터 외삽법을 이용하여 추정한 극한하중의 신뢰성 판단 방법을 제안 하는데 있다. 이를 위해 극한하중이 구해진 10본의 말뚝을 3개 현장에 걸쳐서 수집하였다. 그리고 이 10개의 하중-침하 곡선으로부터 Davisson 방법을 이용하여 구한 실제 계측 극한하중의 25%, 50%, 60%, 70%, 80%, 그리고 90%에 해당하는 하중-침하 곡선 자료만이 확보되었다고 가상하고 각각의 자료에 대하여 쌍곡선 방법으로 외삽한 다음, 극한하중을 새로이 결정하였다. 이렇게 결정된 외삽 극한하중의 신뢰성을 통계분석을 통하여 평가하였다. 그 결과, 확보하였다고 가상한 하중-침하 곡선의 최대 침하량 대 외삽 극한하중에서의 침하량 비가 0.6 이상인 경우, 외삽으로 예측한 극한하중은 실제 계측 극한하중보다 평균적으로 20% 이내에서 보수적인 값을 나타내었다. 또한, 항타말뚝의 정재하시험 자료에 대하여 본 논문에서 제안한 방법으로 분석하여 동일한 결과를 확인하였다.