• The Journal of Korean Physical Therapy
• /
• v.27 no.4
• /
• pp.240-245
• /
• 2015

Purpose: The purpose of this study was to compare the blocked practice and random practice of task-oriented training in patients with chronic stroke to determine the effect of lower extremity muscle activity and balance ability. Methods: The thirty participants were randomly assigned to either the block practice group (BP) group or the random practice group (RP) and received the training three times per week, 30 minutes per day, for six weeks. Surface electromyography was used for measurement of lower extremity muscle activity. Static balance was to measured the stability index (SI) and weight distribution index (WDI) using the Tetrax. The four square step test (FSST) was used to measure dynamic balance. The paired t-test was used for determination of differences before and after intervention, and the independent t-test was used for determination of differences between groups. Results: Lower extremity muscle activity, RA and GCM was improved in the RP group after intervention and between groups. TA was significantly improved in the RP group compared with the BP group. In comparison of before and after interventions, SI was reduced in BP and RP. WDI in OS was reduced in comparison of BP and RP before and after intervention. CS was reduced in BP and RP. The OS and CS was improved in RP compared with BP. In comparison of before and after intervention, FSST was improved in BP and RP. Conclusion: Task-oriented training methods using random practice was found to be effective in promoting lower extremity muscle activity and balance ability in chronic stroke patients.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.1
• /
• pp.10-17
• /
• 2020

Objective: Hallux valgus (HV) is a common musculoskeletal deformity that is accompanied with pain and continues to decrease one's quality of life and ability to perform daily life activities by affecting gait and static stability. Therefore, this study aimed to investigate the effect of the angle of HV (HVA) and to compare the one-legged stance and gait parameters in young adults with less HV and severe HV. Design: Cross-sectional study. Methods: Forty young adults were divided into two groups, where HVA ≥15° (n=20) was defined as HV, and HVA <15° (n=20) was defined as normal. For balance ability, the center of pressure (COP) path, velocity, length of axis of the COP path, deviation of the x-axis and y-axis, and percentage of foot pressure were measured, and gait, the foot rotation angle, step length, percentage of each phase of the gait cycle, time change from the heel to forefoot, and maximum pressure of the forefoot and midfoot were measured. Results: Significant differences were found in sway length and time change from heel to forefoot during walking between the normal and HV groups (p<0.05). Most parameters were not associated with the HVA, but parameters such as length of axis and time to change from heel to forefoot were significantly associated with the HVA (p<0.05). Conclusions: These results suggest that most one-legged stance and gait parameters were not significantly affected by the HVA in young adults; therefore, future studies are needed in order to address other dynamic parameters and other methods of gait analysis for detecting clinically meaningful conditions.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.260-267
• /
• 2021

In this study, a carboxylate-based anionic surfactant SLEC-3 was prepared from coconut oil and the structure was elucidated by using FT-IR, ¹H-NMR and ¹³C-NMR analysis. Measurements of interfacial properties such as critical micelle concentration, static and dynamic surface tensions, emulsification index, and foam stability have shown that SLEC-3 is better in terms of interfacial activity and more effective in lowering interfacial free energy than those of SLES, which has been widely used as a conventional anionic surfactant in the detergent industry. Biodegradability, acute oral toxicity and dermal irritation tests also revealed that SLEC-3 surfactant possesses excellent mildness and low toxicity, indicating the potential applicability in detergents and cleaner products formulation.

• Tribology and Lubricants
• /
• v.34 no.4
• /
• pp.138-145
• /
• 2018

Elliptical bearings are widely used for large steam turbines owing to their excellent load carrying capacity and good dynamic stability. Power loss in bearings is an extremely important parameter, especially for high turbine capacities. Optimization of operation conditions and design variables such as bearing clearance and bearing length can reduce the power loss in elliptical bearings. Although changes in the oil supply method have served to increase the efficiency of the tilting pad journal bearing, it has not explicitly improved elliptical bearings. In this study, we verify the static characteristics of an elliptical bearing by changing the direction of oil supply. We evaluate the bearing power loss and bearing metal temperature, and compare the bearing performance and reliability in different test cases. The direction of oil supply is $90^{\circ}$ (9 o'clock) and $270^{\circ}$ (3 o'clock) when the rotor rotates in a counterclockwise direction. We use an elliptical bearing with an inner diameter and active length of 220.30 and 110.00 mm, respectively. Bearing power loss and bearing metal temperatures are measured and evaluated by rotor rotational speed, oil flow rate, and bearing load. The results reveal a 20 reduction in the power loss when the direction of oil supply is 90. Furthermore, the oil film on the upper part of the bearing has a high temperature when the direction of oil supply is $90^{\circ}$. In contrast, when the direction of oil supply is $270^{\circ}$, the oil film on the upper part of the bearing is relatively cold.

• PNF and Movement
• /
• v.18 no.2
• /
• pp.183-194
• /
• 2020

Purpose: Functional ankle instability (FAI) causes tension in the joints, ligaments, and tendons, and the impact on visual and vestibular organs leads to imbalance. This study compared the effects of a traditional balance training program to virtual reality training to improve FAI. Methods: Twenty-four participants with FAI (CAIT score < 24) were assigned to a virtual reality training group (n = 13) and a traditional balance training group (n = 11). Both groups pursued their respective training program for four weeks. After a ten-minute warm-up, participants completed a 30-minute training session, three times per week. The traditional balance training group underwent static and dynamic training using a balance board and a stability trainer pad while the virtual reality group underwent balance training using a virtual reality program. Biorescue was used to measure changes in the speed and length of center of pressure (COP) for single-leg stance pre- and post-training. Results: The speed and length of COP improved significantly in both groups after training as compared to before (p < 0.05). However, there were no significant differences in these outcomes between the virtual reality training group and the traditional balance training group (p>0.05). Conclusion: The study findings confirm the effectiveness of both virtual reality training and traditional balance training in reducing ankle instability, with no difference in treatment effects.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.193-197
• /
• 2002

The tribological properties and van der Waals attractive forces and the thermal stability of films are very important characteristics of highly hydrophobic fluorocarbon (FC) films for the long-term reliability of nano system. The effect of thermal annealing on films and van der Waals attractive forces and friction coefficient of films have been investigate d in this study. It was coated Al wafer which was treated O2 and Ar that ocatfluorocyclobutane ($C_4_{8}$) and Ar were supplied to the CVD chamber in the ratio of 2:3 for deposition of FC Films. Static contact angle and dynamic contact angle were used to characterize FC films. Thickness of films was measured by variable angle spectroscopy ellipsometer (VASE). Nanotribological data was got by atomic force microscopy (AFM) to measure roughness, lateral force microscopy (LFM) to measure friction force, and force vs. distance (FD) curve to evaluate adhesion force. FC films were cured in N2 and vacuum. The film showed the slight changes in its properties after 3 hr annealing. FTIR ATR studies showed the decrease of C-F peak intensity in the spectra as the annealing time increased. A significant decrease of film thickness has been observed. The friction force of Al surface was at least thirty times higher than ones with FC films. The adhesive force of bare Al was greater than 100 nN. After deposit FC films adhesive force was decreased to 40 nN. The adhesive force of films was decreased down to 10 nN after 24 hr annealing. During 24 hr annealing in $N_2$and vacuum at $100^{\circ}C$ film properties were not changed so much.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.33-40
• /
• 2022

Recently, cultural heritages in South Korea gain many interests of restoration and preservation from the government since many of that have been severely damaged during earthquakes. Many previous studies in both terms of experimental and analytical approaches have been done to examine structural behavior and decide appropriate methods of preservation. Being motivated by such researches, this research aims to investigate a religious stone pagoda dated back to the Goryeo Dynasty in Korea. The structure consists of a granite stone foundation and baked bricks, which resembles the shape of traditional pagodas. In order to examine the structural behavior of the pagoda, an analytical model is implemented using ANSYS, a comprehensive engineering simulation platform. For the time history analysis of the pagoda, several earthquake excitations are chosen and input to simulation modeling. Seismic response of the tower such as time domain, natural frequency, modal shapes and peak acceleration measured at each layer are presented and discussed. In addition, the amplification ratio of the tower is calculated from the accelerations of each layer to determine tower stability in accordance with Korean seismic design guide. The determination and evaluation of status and response of the brick tower by simulation analysis play an important role in the preservation of history as well as valuable architectural heritages in South Korea.

• Tribology and Lubricants
• /
• v.34 no.5
• /
• pp.183-190
• /
• 2018

Tilting pad journal bearing is widely used for steam turbines because of its excellent dynamic stability. As the turbine capacity increases, power loss in the bearings becomes a matter of concern. Power loss in tilting pad journal bearings can be reduced by increasing the bearing clearance and reducing the pad arc length. In this study, the tilting pad journal bearing is tested by changing the seal tooth clearance to verify the static characteristics of the bearing. Bearing power loss and bearing metal temperature are evaluated to compare the bearing's performance and reliability for several test cases. The test bearing is a tilting pad journal bearing with 300.62mm inner diameter and 120.00mm active length. The bearing power loss, its metal temperature, and oil film thickness are measured and evaluated based on the rotor's rotational speed, oil flow rate, and bearing load. Test results show that a tilting pad journal bearing with large seal tooth clearance has 40% lower power loss compared with a bearing with a small seal tooth clearance. As the seal tooth clearance is increased, the power loss of the tilting pad journal bearing decreases. However, with respect to the bearing metal temperatures, a detuning point is observed that makes the minimum bearing metal temperature. Moreover, as the seal tooth clearance is increased, the oil film thickness increases due to high viscosity.

• PNF and Movement
• /
• v.17 no.3
• /
• pp.451-461
• /
• 2019

Purpose: This study identified the effect of abdominal muscle contraction using changes in waist circumference for healthcare workers with back pain due to inadequate posture during working hours. Methods: In this study, we provided educational training focused on posture alignment and utilized waist circumference change sensors to induce the contraction of abdominal muscles as a method to address low back pain in healthcare workers. All 32 participants received the same training and then were assigned to two groups: wearing the keeping core band (CB) and not wearing the keeping core band (NCB). For the CB group, the waist circumference change sensor was applied for 6 weeks during working hours. Wilcoxon's signed-ranks test and paired t-tests were used to compare the differences between the groups. All statistical significance levels were set to α=0.05. Results: Trunk muscle endurance increased significantly in the CB group. There was no significant difference in stability index to evaluate static postural control, but active hip abduction tests, which evaluate dynamic postural control, showed significant decrease in the CB group. Conclusion: These results suggest that the induction of abdominal contraction using the waist circumference change sensor may improve the trunk muscle endurance and the postural control ability of the hip and pelvis of healthcare workers.

• Wind and Structures
• /
• v.14 no.3
• /
• pp.187-208
• /
• 2011

Based on the ANSYS, an approach of full-mode aerodynamic flutter analysis for long-span suspension bridges has been presented in this paper, in which the nonlinearities of structure, aerostatic and aerodynamic force due to the deformation under the static wind loading are fully considered. Aerostatic analysis is conducted to predict the equilibrium position of a bridge structure in the beginning, and then flutter analysis of such a deformed bridge structure is performed. A corresponding computer program is developed and used to predict the critical flutter wind velocity and the corresponding flutter frequency of a long-span suspension bridge with double main span. A time-domain analysis of the bridge is also carried out to verify the frequency-domain computational results and the effectiveness of the approach proposed in this paper. Then, the nonlinear effects on aerodynamic behaviors due to aerostatic action are discussed in detail. Finally, the results are compared with those of traditional suspension bridges with single main span. The results show that the aerostatic action has an important influence on the flutter stability of long-span suspension bridges. As for a suspension bridge with double main spans, the flutter mode is the first anti-symmetrical torsional vibration mode, which is also the first torsional vibration mode in natural mode list. Furthermore, a double main-span suspension bridge is better in structural dynamic and aerodynamic performances than a corresponding single main-span structure with the same bridging capacity.