• 제목/요약/키워드: Static Characteristics

검색결과 2,615건 처리시간 0.027초

리니어 펄스 모터에서 치 형상과 기자력 불평형이 정추력 특성에 미치는 영향 (Effect of Tooth Shape and Unbalanced M.M.F on Static Thrust Force Characteristics of Linear Pulse Motor)

  • 이동주;이은웅;김성헌;김성종
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권3호
    • /
    • pp.131-137
    • /
    • 2000
  • 2 phase 8 pole HB-type(flat-type) Linear Pulse Motor can be used as the high precision position actuator because of its many advantages (simple control circuit, high stiffness characteristics, etc). Also, using the microstep drive, its noise and vibration can be reduced considerably and positional resolution may be increased further. But, $20^{\circ}$tapered tooth shape to reduce the normal force have an much effect on the static thrust force characteristics. And, because of hybrid-type LPM, interaction between the permanent magnet and the excitation current have an effect on the various characteristics of LPM. Hence, in this paper, the effect of tooth shape on static thrust force characteristics was analyzed using the air gap permeance by finite element method. For analyzing the effect of unbalance between the m.m.f of permanent magnet and the m.m.f of excitation current, unbalanced m.m.f coefficient $\sigma$ were introduced with the permenace matrix and switching matrix.

  • PDF

경량화용 복합재 튜브의 적층구성이 흡수에너지 특성에 미치는 영향 (Influence of Stacking Sequence Conditions the Absorbed Energy Characteristics of Composite Tubes)

  • 김영남;김지훈;양인영
    • 한국정밀공학회지
    • /
    • 제18권11호
    • /
    • pp.34-41
    • /
    • 2001
  • This study is to investigate the energy absorption characteristics of CFRP(Carbon-Fiber Reinforced Plastics) tubes on static and dynamic tests. Axial static compression tests have been carried out using the static testing machine(Shin-gang buckling testing machine) and dynamic compression tests have been utilized using an vertical crushing testing machine. When such tubes are subjected to crushing loads, the response is complex and depends on the interaction between the different mechanisms that could control the crushing process. The collapse characteristics and energy absorption have been examined for various tubes. Energy absorption of the tubes are increased as changes in the lay-up which may increase the modulus of tubes. The results have been varied significantly as a function of ply orientation and interlaminar number.

  • PDF

시각정보 유입 특성에 따른 정적 기립균형 분석 (Analysis of the Static Uprighting Balance in the Visual Input Characteristics)

  • 남건우;하미숙
    • 대한물리치료과학회지
    • /
    • 제22권1호
    • /
    • pp.11-17
    • /
    • 2015
  • Purpose : The current study examines changes of static uprighting balance in the visual input characteristics. Method : Total 50 person(male 16, female 34) were participated in this study. They were tested with 'hole in the card' for identification of dominant eye's side, then they were divided 3 groups(both visual input group, dominant visual input group, and non-dominant visual input group). 3 groups were measured with Romberg test on the force platform device to compare the static uprighting balance characteristics ; moving distance, mean velocity, and sway area of the CoM(center of mass), during 20 seconds. Results : The results by one-way repeated measure ANOVA were as follows. In moving distance and mean velocity of CoM, non-dominant visual input group was unstable than dominant visual group and both visual input group(p<0.05). But, in sway area of CoM, significant difference was not existed statistically. Conclusion : These result can be applied to design the static uprighting balance program using visual input mediation.

  • PDF

베어링특성에 따른 HSK 공구시스템의 정적 및 동적 거동의 유한요소해석 (An Analysis of Static and Dynamic Behavior of the HSK Tooling System According to Bearing Characteristics)

  • 박진효;김정석;구민수;강익수;김기태
    • 한국생산제조학회지
    • /
    • 제19권3호
    • /
    • pp.346-352
    • /
    • 2010
  • Recently, the high-tech industries, such as the aerospace industry, the auto industry, and the electronics industry, are growing up considerably. Because of that, high machining accuracy and productivity of precision parts have been required. The tooling system is important part in the machining center. HSK tooling system is more suitable than BT tooling system for that of high speed machining center. It is because static stiffness and machining accuracy of HSK tooling system are higher than those of BT tooling system. In this paper, static and dynamic behavior of the HSK tooling System is analyzed according to bearing characteristics and lightweight parts. In order that, three different models of the HSK tooling system are modelled by using a 3D modeling/design program. More stable one in the models of HSK tooling system can be selected by using the FEA(Finite Element Analysis).

비틀어진 형상(Twisted)을 가지는 고층 구조물의 역학적 특성 분석 (Analysis of the Static Characteristics of High-Rise Structures With Twisted Shape)

  • 이다혜;김현수;강주원
    • 한국공간구조학회논문집
    • /
    • 제20권4호
    • /
    • pp.93-100
    • /
    • 2020
  • In this study, structural characteristics were analyzed by combining gravity load and lateral loads such as seismic loads through static analysis of example structures, and the static characteristics of the twisted structure according to the plane rotation angle were also analyzed. Example structures were selected as regular structure, and twisted structures; 1.0, 2.0, and 3.0 degree angle of rotation per story, and static analysis was performed by the load combination case 1 and case 2. As a result the story drift ratio of the twisted-shaped structure also increased as the plane rotation angle per story increased. The eccentricity according to the load combination was the highest in the lower stories of all analysis models, and the eccentricity was found to be larger as the rotation angle decreased. The twisted-shaped structure was more responsible for the bending moment of the column than the regular structure, and the vertical member axial force of all analysis models was almost similar.

3차원 MT 역산에서 정적효과의 특성 고찰 (Characteristics of Static Shift in 3-D MT Inversion)

  • 이태종;내전이홍;좌구목유;송윤호
    • 지구물리와물리탐사
    • /
    • 제6권4호
    • /
    • pp.199-206
    • /
    • 2003
  • MT 탐사자료의 역산에 있어서 지하의 전기비저항과 함께 정적효과를 파라미터로 설정하여 동시 역산을 수행하는 알고리듬을 하나의 지하구조 모델에 각기 다른 양의 정적효과를 포함시킨 4개의 자료에 대하여 적용시키고 이를 정적효과가 전혀 고려되지 않은 경우와 비교하여, 3차원 역산에서 정적효과가 미치는 영향 및 그 특성에 대하여 분석하였다. 일반적으로 현장자료에 정적효과가 어느 정도 포함되어 있는지에 대한 사전 정보가 전혀 없으므로 역산과정에서 이를 조절하는 trade-off 파라미터의 적절한 선택이 매우 중요하며, 본 연구에서는 모델의 smoothness와 static shift의 양을 조절하는 각각의 파라미터의 크기를 매 반복마다 구하는 알고리듬을 동시역산에 적용하였으며 4개의 이론자료에 적용한 결과 만족할 만한 결과를 얻었다. 정적효과가 포함된 자료에 대하여 정적효과를 고려하지 않은 역산(기존의 MT 역산)에서는 지표 block의 전기비저항을 바꿔 역산 스스로가 정적효과를 유발하려는 경향을 보였으며 이의 결과로 저주파수에서는 상당한 정적효과를 발생시켜 정적효과가 그리 크지 않은 경우 심부구조를 어느 정도 규명해 내는 것으로 나타났다. 그러나 고주파수에서는 이들 지표 block의 영향이 주파수에 무관하지 않게 되어 정적효과를 포함하는 자료의 겉보기 전기비저항과 위상을 동시에 만족시키지 못하게 된다. 그러나 정적효과를 파라미터로 하는 동시역산의 경우, 매우 심한 정적효과를 포함하는 자료에 대해서도 지하구조를 매우 정확히 영상화 하는 것이 가능하였다.

파일럿 비례압력제어밸브의 정특성 및 동특성에 관한 실험적 분석 (Experimental Analysis of the Static and Dynamic Characteristics for a Pilot Proportional Pressure Control Valve)

  • 정헌술;남지우
    • 유공압시스템학회논문집
    • /
    • 제8권4호
    • /
    • pp.9-16
    • /
    • 2011
  • Because of the increasing demand on the high precision and high response of a machinery, proportional control valves are widely adopted at various application fields. This paper studies on the static and dynamic characteristics of a pilot proportional pressure control valve. An experimental apparatus including hydraulic pump, variable speed inverter, pressure and flow sensors and data aquisition system was set up. And various experiments such as P-Q-V curves, step responses due to input voltage and flow rate, hysteresis, frequency response of the proportional valve was carried out and the results are discussed.

문형머시닝센터의 구조해석을 통한 최적화에 관한 연구 (A Study on Optimization for Static Characteristics Analysis of Gantry-Type Machining Centers)

  • 유덕상
    • 한국기계가공학회지
    • /
    • 제14권6호
    • /
    • pp.122-128
    • /
    • 2015
  • Recently, as the demand for high efficiency, multi-function machine tools has increased, domestic machine tool industries are investing in research and development for Gantry-Type Machining centers. In this thesis, for the purpose of evaluating machining accuracy and designing a machine tool structure, a simplified model of the main frame is suggested. The results show the general characteristics of the optimum design, and the approach is shown as practicable for the preliminary design analysis and improvement of a conceptual design of a Gantry-Type Machining center. This paper's results are expected to improve the static characteristics of Gantry-Type Machine centers. The three-dimensional finite element models proved that the modeling method might be applied to real machine tool structures.

압축하중을 받는 방진고무의 동특성 해석 및 실험 (Analysis and Experiment of the Dynamic Characteristics of Rubber Materials for Anti-Vibration under Compression)

  • 김국원;임종락;한용희;손희기;안태길
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
    • /
    • pp.602-607
    • /
    • 1998
  • Rubber materials are extensively used in various machine design application, mainly for vibration/shock/noise control devices. Over the years an enormous effort has been put into developing procedures to provide properties of rubber material for design function. However, there are still a lot of difficulties in the understanding of dynamic characteristics of the rubber components in compression. In this paper, the dynamic characteristics of rubber materials for anti-vibration under compression were investigated. Dynamic and static tests for rubber material with 3 different hardness were performed. In dynamic tests, non-resonance method, impedance method, was used to obtain the complex modulus (storage modulus and loss factor) and the effects of static pre-strain on the dynamic characteristics were investigated. Also, a relation equation between linear dynamic and nonlinear static behavior of rubber material was discussed and its usefulness to predict their combined effects was investigated.

  • PDF

화자인식에서 차분을 이용한 새로운 데이터 추출 방법 (New Data Extraction Method using the Difference in Speaker Recognition)

  • 서창우;고희애;임영환;최민정;이윤정
    • 음성과학
    • /
    • 제15권3호
    • /
    • pp.7-15
    • /
    • 2008
  • This paper proposes the method to extract new feature vectors using the difference between the cepstrum for static characteristics and delta cepstrum for dynamic characteristics in speaker recognition (SR). The difference vector (DV) which it proposes from this paper is containing the static and the dynamic characteristics simultaneously at the intermediate characteristic vector which uses the deference between the static and the dynamic characteristics and as the characteristic vector which is new there is a possibility of doing. Compared to the conventional method, the proposed method can achieve new feature vector without increasing of new parameter, but only need the calculation process for the difference between the cepstrum and delta cepstrum. Experimental results show that the proposed method has a good performance more than 2.03%, on average, compared with conventional method in speaker identification (SI).

  • PDF