• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.785-787
• /
• 2004

The purpose of this paper is characteristic analysis of permanent magnet generator for AVR power of brushless synchronous generator. However, the PMG has a spoke type rotor with overhang, so we perform the analysis considering overhang for the precise airgap flux density. In this paper, dynamic analysis model with 2D FEM considering overhang is proposed by use of 2D, 3D static FEM results. The proposed method is verified by the results of PMG load test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.58-62
• /
• 2006

The purpose of this paper is characteristic analysis of permanent magnet generator (PMG) for automatic voltage regulator (AVR)power of brush less synchronous generator. However, this PMG has a spoke type permanent magnet rotor with large overhang for high power density, characteristic analysis considering concentration effect of air-gap flux density due to the overhang should be performed. 30 transient finite element method (FEM)analysis is good solution for overhang parameter, but this method needs too much calculation time. In this paper, we examined the overhang effects based on overhang length and material of rotor core by using 20 and 30 static FEM analysis, and proposed 20 dynamic FEA model considering overhang parameter which gives good and rapid results. The proposed method is verified by the test results of no load, load and short circuit test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.698-700
• /
• 1993

This paper describes characteristic analysis of VVVf type high-frequency considering dead time. Static power conversion are now used in a great variety of application including induction heating, high-frequency generation, DC/DC power converter, etc. In the circuit analysis, an offer circuit was compared with safety operating region and steady state characteristics considering dead time.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.156-160
• /
• 2000

When the structure supporting the rotor as well as the rotor itself is in the resonant range, it cause the vibration problem. Although the static characteristics of structures was considered during the design process, we must consider the resonance problem between the excitation(the main revolution frequency of the rotor) between the dynamic characteristics of its structures. This paper presents we improved the dynamic characteristic of a bearing support system to remove a resonance problem so that stabilized the turbine-generator system.

• 대한치과교정학회지
• /
• 제28권1호
• /
• pp.123-133
• /
• 1998

TiN ion-plating된 Co-Cr 선재(.016", .016"x.022")와 ion-plating되지 않은 선재(.016", .016"x.022")를 이용하고, 3 가지 종류의 브라켓(TiN ion-plating된 금속 브라켓, 세라믹 브라켓 및 플라스틱 브라켓)을 대상으로 마찰실험을 행하고, 거기에서 얻어진 마찰 특성곡선과 곡선으로부터 구한 최대 정지마찰력, 그리고 선재와 브라켓의 표면양상을 주사전자현미경으로 관찰하여 TiN ion-plating의 효과를 검토한 결과 다음과 같은 결론을 얻었다. $\cdot$3가지 종류의 브라켓에 TiN ion-plating된 선재를 사용한 경우의 마찰력은 TiN ion-plating되지 않은 선재를 사용한 경우의 마찰력보다 각각 통계학적으로 유의성있게 낮았다(p<0.05). $\cdot$3가지 종류의 브라켓에 원형 선재를 사용한 경우의 마찰력은 각형 선재를 사용한 경우의 마찰력보다 각각 통계학적으로 유의성있게 낮았다(p<0.05). $\cdot$원형 선재를 사용한 경우 TiN ion-plating되지 않은 선재를 사용한 경우가 TiN ion-plating된 선재를 사용한 경우보다 선재 및 브라켓 슬롯의 표면이 더욱 거친 양상을 나타내었다. $\cdot$각형 선재를 사용한 경우 전반적으로 원형 선재를 사용한 경우보다 선재 및 브라켓 슬롯의 표면이 더욱 거친 양상을 나타내었다. $\cdot$TiN ion-plating된 원형 선재를 사용한 경우 정지마찰력과 운동마찰력의 차는 별로 없었으나 TiN ion-plating된 각형 선재를 사용한 경우 정지마찰력은 운동마찰력보다 다소 높았다. $\cdot$TiN ion-plating되지 않은 선재를 사용한 경우가 TiN ion-plating된 선재를 사용한 경우에 비해 정지마찰력이 운동마찰력보다 휠씬 높았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.313-316
• /
• 2008

철근 콘크리트 구조물의 철근 부식은 구조물의 성능 저하의 주요한 원인 중 하나이다. 철근 부식은 구조물의 수명을 단축시켜 막대한 유지 관리 비용을 요구하게 된다. 또한 이러한 철근의 부식은 주기적인 반복하중을 받는 교량이나 도로와 같은 구조물들의 구조적 성능저하를 가중시키는 요인이 되고 있다. 이러한 이유들로 인해 철근을 대체할 수 있는 FRP 보강근의 사용에 대한 관심이 증가하고 있다. 그러나 국내외적으로 FRP 보강근의 피로시험에 대한 연구는 전무한 실정이다. 이에 본 연구에서는 국내외로 상용화된 FRP(GFRP, CFRP) 보강근의 실제 구조물에 대한 적용가능성을 고찰하기위해 휨 보강시험체의 인장부 보강근으로 사용하여 정적 및 피로 성능을 검증하고자 한다. 본 연구에서 사용된 시험체는 ACI 440.1R-06으로 설계되었으며, CFRP 보강근으로 보강된 시험체(CR)와 GFRP 보강근으로 보강된 시험체(GR)는 과보강 단면으로 설계되었다. 정적 휨 실험을 수행한 결과, CR 시험체와 GR 시험체 모두 콘크리트 보의 상단 압축부가 파괴되는 것을 확인할 수 있었다. 피로 실험시 피로응력수준은 정적 휨 강도의 60%, 70%, 80%로 하여 실험을 수행하였다. 대부분의 시험체가 압축 파괴 양상을 보였지만 CR-60과 CR-70 시험체는 인장부 보강근의 파단으로 인한 파괴를 확인할 수 있었다. 피로 실험결과를 바탕으로 회귀분석을 통해 S-N 상관도를 적용하여 S-N 관계식을 얻을 수 있었다.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.22-31
• /
• 2019

The flammable liquid conductivity is an important factor in determining the generation of electrostatic in fire and explosion hazardous areas, so it is necessary to study the physical properties of flammable liquids. In particular, the relevant liquid conductivity in the process of handling flammable liquids in relation to the risk assessment and risk control in fire and explosion hazard areas, such as chemical plants, is classified as a main evaluation item according to the IEC standard, and it is necessary to have flammable liquid conductivity measuring devices and related data are required depending on the handling conditions of the material, such as temperature and mixing ratio for preventing the fire and explosion related to electrostatic. In addition, IEC 60079-32-2 [Explosive Atmospheres-Part 32-2 (Electrostatic hazards-Tests)] refers to the measuring device standard and the conductivity of a single substance. It was concluded that there is no measurement data according to the handling conditions such as mixing ratio of flammable liquid and temperature together with the use and measurement examples. We have developed the measurement reliability by improving the structure, material and measurement method of measuring device by referring to the IEC standard. We have developed a measurement device that is developed and manufactured by itself. The test results of flammable liquid conductivity measurement and the data of the NFPA 77 (Recommended Practice on Static Electricity) Annex B Table B.2 Static Electric Characteristic of Liquids were compared and verified by conducting the conductivity measurement of the flammable liquid handled in the fire and explosion hazardous place by using Measuring / Data Acquisition / Processing / PC Communication. It will contribute to the prevention of static electricity related disaster by taking preliminary measures for fire and explosion prevention by providing technical guidance for static electricity risk assessment and risk control through flammable liquid conductivity measurement experiment. In addition, based on the experimental results, it is possible to create a big data base by constructing electrostatic physical characteristic data of flammable liquids by process and material. Also, it is analyzed that it will contribute to the foundation composition for adding the specific information of conductivity of flammable liquid to the physical and chemical characteristics of MSDS.

• 오토저널
• /
• 제8권3호
• /
• pp.77-87
• /
• 1986

The fatigue characteristic study of a Pony Coil spring is performed by considering the tropical service conditions in the range of 50.deg. C through 150.deg. C. The experiment results of the static and dynamic characteristics of the test pieces agreed with the result of the strain analysis by wittricke's method. The strain energy value is increased as temperature rises. An increase is 1.58% at 100.deg. C and 2.26% at 150.deg. C after fatigue tests. The elastic strain is also decreased as temperature rises.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1507-1513
• /
• 1999

This paper describes simulation and experimental results to analyze the dynamic characteristics of STATCOM, which is connected to the ac system for compensation the power factor and improving the voltage stability. The simulation and experimental results confirm that the scaled model for STATCOM can properly compesate the power factor of the load and regulate the bus voltage at the common connection point.

• 연구논문집
• /
• 통권23호
• /
• pp.5-13
• /
• 1993

The present work deals with the theoretical prediction of static & dynamic characteristic of annular type externally pressurized thrust air bearings with metal-sintered porous media. For the evaluation of surface loading effect by machining, it is assumed that the flow at the porous surface is dominant and which is equivalent to the flow through orifice. Finite different method with over-relaxation method is used to solve the numerical problems. The influences of radius ratio, supply pressure and squeeze number on performances are investigated, as the results. The results of this study can be used to predict the optimal running condition and stable realm of porous bearings.