• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.738-748
• /
• 2002

In this paper, a performance evaluation model of the Multistage Interconnection Network(MIN) with the multiple-buffered crossbar switches is Proposed and examined. Buffered switch technique is well known to solve the data collision problem of the MIN. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. The performance of the multiple-buffered${\alpha}{\times}{\alpha}$ crossbar switch is analyzed. Steady state probability concept is used to simplify the analyzing processes, Two important parameters of the network performance, throughput and delay, are then evaluated, To validate the proposed analysis model, the simulation is carried out on a Baseline network that uses the multiple buffered crossbar switches. Less than 2% differences between analysis and simulation results are observed. It is also shown that the network performance is significantly improved when the small number of buffer spaces is given. However, the throughput elevation is getting reduced and network delay becomes increasing as more buffer spaces are added in a switch.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.83-92
• /
• 2005

An electromagnetic acoustic transducer (EMAT) is a unique probe that does not require a couplant or gel and also can usually generate or detect an ultrasonic wave into specimens across a small gap. It, therefore can be applied in a noncontact mode with a high degree of reproducibility. Especially stiffness of composites depends on layup sequence of CFRP(carbon fiber reinforced plastics) laminates. It is very important to evaluate the layup errors in prepreg laminates. A nondestructive technique can therefore serve as a useful measurement for detecting layup errors. This shear wave for detecting the presence of the errors is very sensitive. A decomposition model has been used in the interpretation and prediction of test results. Test results have been com pared with model data. It is found that the high probability shows between tests and the model utilized in characterizing cured layups of the laminates. Also a C-scan method was used for detecting layup of the laminates because of extracting fiber orientation information from the ultrasonic reflection caused by structural imperfections in the laminates. Therefore, it was found that interface C-scan images show the fiber orientation information by using two-dimensional fast Fourier transform (2-D FFT).

• Journal of Internet Computing and Services
• /
• v.15 no.4
• /
• pp.119-124
• /
• 2014

Blind adaptive systems based on the Euclidean distance (ED) between the distribution function of the output samples and that of a set of random symbols generated at the receiver matching with the distribution function of the transmitted symbol points estimate the ED at each iteration time to examine its convergence state or its minimum ED value. The problem is that this ED estimation obtained by block?data processing requires a heavy calculation burden. In this paper, a recursive ED estimation method is proposed that reduces the computational complexity by way of utilizing the relationship between the current and previous states of the datablock. The relationship provides a ground that the currently estimated ED value can be used for the estimation of the next ED without the need for processing the whole new data block. From the simulation results the proposed recursive ED estimation shows the same estimation values as that of the conventional method, and in the aspect of computational burden, the proposed method requires only O(N) at each iteration time while the conventional block?processing method does $O(N^2)$.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.4
• /
• pp.529-539
• /
• 1998

The effects of membrane surface charge originated from lipid head groups on ion channels were tested by analyzing the activity of single large conductance $Ca^{2+}-activated\;K^+$ (maxi K) channel from rat skeletal muscle. The conductances and open-state probability ($P_o$) of single maxi K channels were compared in three types of planar lipid bilayers formed from a neutral phosphatidylethanolamine (PE) or two negatively-charged phospholipids, phosphatidylserine (PS) and phosphatidylinositol (PI). Under symmetrical KCl concentrations $(3{\sim}1,000\;mM)$, single channel conductances of maxi K channels in charged membranes were $1.1{\sim}1.7$ times larger than those in PE membranes, and the differences were more pronounced at the lower ionic strength. The average slope conductances at 100 mM KCl were $251{\pm}9.9$, $360{\pm}8.7$ and $356{\pm}12.4$ $(mean{\pm}SEM)$ pS in PE, PS and PI membranes respectively. The potentials at which $P_o$ was 1/2, appeared to have shifted left by 40 mV along voltage axis in the membranes formed with PS or PI. Such shift was consistently seen at pCa 5, 4.5, 4 and 3.5. Estimation of the effect of surface charge from these data indicated that maxi K channels sensed the surface potentials at a distance of $8{\sim}9\;{\AA}$ from the membrane surface. In addition, similar insulation distance ($7{\sim}9\;{\AA}$) of channel mouth from the bilayer surface charge was predicted by a 3-barrier-2-site model of energy profile for the permeation of $K^+$ ions. In conclusion, despite the differences in structure and fluidity of phospholipids in bilayers, the activities of maxi K channels in two charged membranes composed of PS or PI were strikingly similar and larger than those in bilayers of PE. These results suggest that the enhancement of conductance and $P_o$ of maxi channels is mostly due to negative charges in the phospholipid head groups.

• Journal of the Korean Geographical Society
• /
• v.45 no.5
• /
• pp.609-627
• /
• 2010

Finding the ideal location for your business is one of the most critical and important steps you will have to undertake. Otherwise, done in the wrong way you will only end up paying an expensive cost for an unsuitable location. Therefore to select the perfect location for your business, this study makes a reasonable and simple model for retail shops by calculating occupation population for each store applying Huffs "Probability Theory" to Hypermarket in Seoul. Then this study, based on occupation population, has divided every unit section (dong scale) into 4 market types which represent the state of the competitive markets, including monopoly, oligopoly, competitive, and noncompetitive markets. Consequently, the most reasonable place to locate a new store is where it can take most of the customers, that is, a place which can take non-competitive market as much as possible and is distant far enough from competitive market where competition is severe.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.10
• /
• pp.426-432
• /
• 2006

This paper describes the concepts of Static Line Rating (SLR) and Dynamic Line Rating (DLR) and the computational methods to demonstrate them. Calculation of the line capacity needs the heat balance equation which is also used for computing the reduced tension in terms of line aging. SLR is calculated with the data from the worst condition of weather throughout the year. Even now, the utilization ratio is obtained from this SLR data in Korea. DLR is the improved method compared to SLR. A process for DLR reveals not only improved line ratings but also more accurate allowed line ratings based on line aging and real time conditions of weather. In order to reflect overhead transmission line aging in DLR, this paper proposes the method that considers the amount of decreased tension since the lines have been installed. Therefore, the continuous allowed temperature for remaining life time is newly acquired. In order to forecast DLR, this paper uses weather forecast models, and applies the concept of Thermal Overload Risk Probability (TORP). Then, the new concept of Dynamic Utilization Ratio (DUR) is defined, replacing Static Utilization Ratio (SUR). For the case study, the two main transmission lines which are responsible for the north bound power flow in the Seoul metropolitan area are chosen for computing line rating and utilization ratio. And then line rating and utilization ratio are analyzed for each transmission line, so that comparison of the present and estimated utilization ratios becomes available. Finally, this paper proves the validity of predictive DUR as the objective index, with simulations of emergency state caused by system outages, overload and so on.

• Asia-Pacific Journal of Business
• /
• v.5 no.1
• /
• pp.13-21
• /
• 2014

Shopping malls have become key players in the Indian retail space. Even in upcoming Indian towns, malls have been mushrooming. Raipur, the capital city of the Indian state of Chhattisgarh has witnessed the growth over the last few years. However, this unplanned growth of malls in cities is expected to lead to oversupply of mall space in the near future, making things difficult for mall developers. The study is an attempt to identify appropriate strategies for mall developers to iron out such kinks. This paper presents 'shopping experience' as a tool to compete, succeed and explore its composition in terms of its constituent factors. The paper uses Exploratory Factor Analysis (EFA) on a non-probability sample of 350 respondents. It condenses a set of twenty-two mall variables into five factors that directly influence the shopping experience. These factors included ambience, infrastructure, marketing focus, convenience and safety and security. In terms of significance, shoppers assigned different weightage to each of these factors. The study shed light on interesting insights regarding the expectations of mall shoppers in the city of Raipur. The results though interesting, may be extended to different social, economic and geographic contexts to check the universality. While strategizing, mall developers must assign proportionate effort on the factors based on the respective contribution to shopping experience. In light of intensifying competition in Raipur, the study is significant for future prospects of malls. In the absence of a scientific and objective basis, the developers run risk of making wrong investment and management decisions. This paper is a useful addition to the body of knowledge on management of shopping malls in India and is unique in terms of its focus on mall shoppers in the smaller Indian cities like Raipur.

• Wind and Structures
• /
• v.20 no.5
• /
• pp.701-718
• /
• 2015

The joint distribution of wind speed and wind direction at a bridge site is vital to the estimation of the basic wind speed, and hence to the wind-induced vibration analysis of long-span bridges. Instead of the conventional way relying on the weather stations, this study proposed an alternate approach to obtain the original records of wind speed and the corresponding directions based on field measurement supported by the Structural Health Monitoring System (SHMS). Specifically, SHMS of Sutong Cable-stayed Bridge (SCB) is utilized to study the basic wind speed with directional information. Four anemometers are installed in the SHMS of SCB: upstream and downstream of the main deck center, top of the north and south tower respectively. Using the recorded wind data from SHMS, the joint distribution of wind speed and direction is investigated based on statistical methods, and then the basic wind speeds in 10-year and 100-year recurrence intervals at these four key positions are calculated. Analytical results verify the reliability of the recorded wind data from SHMS, and indicate that the joint probability model for the extreme wind speed at SCB site fits well with the Weibull model. It is shown that the calculated basic wind speed is reduced by considering the influence of wind direction. Compared to the design basic wind speed in the Specification of China, basic wind speed considering the influence of direction or not is much smaller, indicating a high safety coefficient in the design of SCB. The results obtained in this study can provide not only references for further wind-resistance research of SCB, but also improve the understanding of the safety coefficient for wind-resistance design of other engineering structures in the similar area.

• Animal cells and systems
• /
• v.1 no.1
• /
• pp.123-128
• /
• 1997

The characteristics of allelic polymorphisms of the two (CA)n microsatellite (p599 and ㅅ599) markers spanning the long arm of chromosome 5 were studied in 52 DNA samples from unrelated inhabitants of Seoul (Korea) by using the polymerase chain reaction (PCR) to investigate differences in allele frequencies between Korean and Caucasian populations. The 6 alleles were observed for p599 (CA)n with a polymorphism informative content (PIC) value of 0.71 and 9 alleles for ㅅ599 (CA)n with a PIC value of 0.82. The observed heterozygote frequencies of the loci were estimated to 0.730 and 0.846, respectively. Several allele frequencies of two loci showed significant differences between Korean and Caucasian populations. Genotype data from the two loci were consistent with the Hardy-Weinberg equilibrium by x2 test. Linkage disequilibrium between p599 (CA)n and ㅅ599 (CA)n loci was observed in x2 test between the observed and expected frequency of allelic association. The probability of matching calculated at each locus was 0.104 for p599 (CA)n and 0.043 for ㅅ599 (CA)n, respectively. These results demonstrate the need to determine populationspecific allele frequency distributions for polymorphic markers when performing genetic linkage studies in racially defined several populations.

• Computational Structural Engineering
• /
• v.4 no.4
• /
• pp.125-133
• /
• 1991

For the purpose of efficiently calculating the design sensitivity and the reliability for the complicated structures in which the structural responses or limit state functions are given by implicit form, the probabilistic finite element method is introduced to formulate the deterministic design sensitivity analysis method and incorporated with the second moment reliability methods such as MVFOSM, AFOSM and SORM. Also, the probabilistic design sensitivity analysis method needed in the reliability-based design is proposed. As numerical examples, two thin plates are analyzed for the cases of plane stress and plate bending. The initial yielding is defined as failure criterion, and applied loads, yield stress, plate thickness, Young's modulus and Poisson's ratio are treated as random variables. It is found that the response variances and the failure probabilities calculated by the proposed PFEM-based reliability method show good agreement with those by Monte Carlo simulation. The probabilistic design sensitivity evaluates explicitly the contribution of each random variable to probability of failure. Further, the design change can be evaluated without any difficulty, and their effect on reliability can be estimated quickly with high accuracy.