• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.209-214
• /
• 2004

Time Domain Reflectometry with multiplex system has been installed to configure the spatial and temporal characteristics of soil moisture in a mountainous hillslope. An intensive surveying was performed to build a refined digital elevation model and flow determination algorithms with inverse surveying have been applied to establish an efficient soil monitoring system. Steady state wetness index, quasi-dynamic wetness index and fully dynamic wetness index have been calculated. Continuous monitoring of soil moisture data were analyized with wetness indices. Limitations and hydrological interpretations of this approach have beer discussed.

• Smart Structures and Systems
• /
• v.24 no.3
• /
• pp.293-301
• /
• 2019

Bolted joints are commonly used in civil infrastructure and mechanical assembly structures. Monitoring and identifying the connection status of bolts is the frontier problem of structural research. The existing research is mainly on the looseness of a single bolt. This article presents a study of assessing the loosening/tightening health state and identifying the loose bolt by using ultrasonic guided wave in a bolt group joint. A bolt-tightening index was proposed for evaluating the looseness of a bolt connection based on correlation coefficient. The tightening/loosening state of the bolt was simulated by changing the bolt torque. More than 180 different measurement tests for total of six bolts were conducted. The results showed that with the bolt torque increases, value of the proposed bolt-tightening index increases. The proposed bolt-tightening index trend was very well reproduced by an analytical expression using a function of the torque applied with an overall percentage error lower than 5%. The developed damage index based on the proposed bolt-tightening index can also be applied to locate the loosest bolt in a bolt group joint. To verify the effectiveness of the proposed method, a bolt group joint experiment with different positions of bolt looseness was performed. Experimental results show that the proposed approach is effective to detect and locate bolt looseness and has a good prospect of finding applications in real-time structural monitoring.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.949-960
• /
• 2003

The resolution issue of wetness index with relaxation of the steady state assumption is explored on the platform of Digital Elevation Model (DEM). The variabilities of the quasi-dynamic wetness index and the dynamic wetness index are discussed on the base of the spatial and statistical aspects depending upon resolutions of DEM and the drainage time. The organization patterns of the wetness index can be observed upon various drainage times and pixel size. The transient behaviour of wetness patterns of the Sulmachun watershed are shown in the relatively short drainage time. The statistical analysis of the quasi-dynamic and dynamic wetness analysis provide the convergence of analysis results to the steady state characteristics later than 10,000 hours drainage time. The probability density functions of the quasi-dynamic and the dynamic wetness index shows the existence of the threshold pixel size of DEM which provide stability and consistency in the computation result of these two wetness index.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.3
• /
• pp.3-15
• /
• 2001

The in situ observations and the seawater analyses were conducted for 3 years from August 1996 to August 1999 in order to elucidate and evaluate seasonal variations of marine water quality and trophic state in Mokpo harbour of Korea. Compared the seasonal seawater qualities of Mokpo harbour with the OECD standards of trophic classification in parameters such as Secchi depth, dissolved inorganic nitrogen, phosphate phosphorus and chlorophyll-a, the trophic level of seawater in Mokpo harbour was evaluated to be in mesotrophic or eutrophic state through all 4 seasons and to be in eutrophic state, particularly In summer. The estimation of pollution index by eutrophication showed the seawater quality of Mokpo harbour to deteriorate and fall under the regular grades through all 4 seasons, although the seawater quality of Mokpo harbour was evaluated to be equivalent to the second or third class of the Korean seawater quality standards in view of COD values. The results of eutrophication index estimation showed the high potentiality of red tide occurrence In Mokpo harbour, particularly in summer or fall. In the light of the average atomic ratio of N/P in seawater, the limiting nutrient factor against the growth of phytoplankton was concluded to be phosphorus rather than nitrogen in Mokpo Harbour.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.13-24
• /
• 2019

This paper brings up fallacy of material factors specified for the design of concrete members in the current Korean limit state design code for highway bridges, and proposes new material factors based on a robust optimization scheme to overcome the fallacy. It is shown that the current load factors in the code and the proposed material factors lead to a much higher reliability index than the target index. The load factors are adjusted to yield the target reliability index using the inverse reliability analysis. A reliability-based approach following the basic concept of Eurocode is formulated to determine material factors as well as load factors. The load-material factors obtained by the proposed reliability-based approach yield a lower reliability level than the target index. Drawbacks of the basic concept of Eurocode are discussed. It is pointed out that differences in the uncertainties between materials and members may cause the lower reliability index of concrete member than the target.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.1
• /
• pp.128-162
• /
• 1996

Using Random Sampling, the authors measured the body heights and weights of 31,151 persons - 17,102 in males and 14,049 in females from metropolitan, urban and rural areas between 6 to over 80 year old - for the purpose of investigating the type and the actual condition of the Korean's growth and development. At first, on the basis of the results, the authors measured the growth and development, various kinds of physiques, nutritional index of the 6 to 20s age group. Second, the authors presented the standard body weight of males and females by their body height, who were in the end of their growth (20-29 age group). Third, the authors calculated and presented the normal adapted body weight of the age group who were over 30 age after the growth had been completed. Forth, the author presented the obesity rate of the adults over 20 years old by body mass index. Finally, the authors compared chronological change of the Koreans' body heights and body weights with the results of other researchers. 1. Body Measurement Rapid growth, in terms of body height, which is described by a straight line on a growth curve has been observed among males in the ages 6-13 and among females 6-14. That growth curve turned out to be slower among the people of higher ages by both sexes. The cross-over occurred in both sexes at 11-14. The highest growth rate for a year is at 13-16 for males and 11-13 for females. This indicates that females enter a rapidly growing stage 2 years earlier than males. 2. Various Physiques and Nutritional Index Rapid growth, in terms of Relative Body Weight Index, which is described by a straight line, has been observed among males in the ages 6-16 and females in the ages 6-14. The cross-over occurred in both sexes 12.5-14.5 age in the adolescencent period. Whereupon females outgrow males. The Roher Index displayed more good value in case of females than male and in the adolescent period, the level of fullness is lower than after the completion of development. The Kaup Indices of both sexes increase with age. The index is less than 2.0 for males in 6-14 age group and for females in 6-13 age group and with this, it appeared that development of horizontal axis to long axis is poor. The index is more than 2.0 after 15 age group in males and 14 age group in females and developmental state4 age group and for females in 6-13 age group and with this, it appeared that development of horizontal axis to long axis is poor. The index is more than 2.0 after 15 age group in males and 14 age group in females and developmental state Body Mass Index is less than 20 for males 6-14 age group and for females in 6-13 age group. In the case of the higher age group, that index maintains a normal state.

• Archives of Pharmacal Research
• /
• v.25 no.6
• /
• pp.978-983
• /
• 2002

Small intestinal transit (SIT) has often been regarded as an index of pathophysiological state of postoperative ileus (PI) in rats. The reliability of SIT as an index of PI was examined in the present study. PI was induced via abdominal surgery (i.e., laparotomy with evisceration and manipulation) in rats. For one group of PI-induced rats, SIT of a charcoal test meal was measured. When necessary, the physical state (i.e., severity and site of distension) of the gastrointestinal (GI) tract in each rat was visually examined. For another group of PI-induced rats, abdominal X-ray radiographs were obtained after introducing the barium sulfate suspension. The abdomen was then opened and the physical state of the GI tract was visually examined. The SIT was decreased in most of the PI-induced rats, and the GI distension was observed, with substantial intersubject variations, in all of the PI-induced rats. However, no linear relationship was evident between the SIT and the severity of GI distension (e.g., at 20 h after PI induction). Instead, the severity and site of GI distension could be monitored by the X-ray radiology. Therefore, the use of SIT as an index of PI should be substantially limited.

• Geomechanics and Engineering
• /
• v.15 no.3
• /
• pp.879-888
• /
• 2018

Probability-based design codes have been developed to sufficiently confirm the safety level of structures. One of the most acceptable probability-based approaches is Load Resistance Factor Design (LRFD), which measures the safety level of the structures in terms of the reliability index. The main contribution of this paper is to calibrate the load and resistance factors of the design code for tunnels. The load and resistance factors are calculated using the available statistical models and probability-based procedures. The major steps include selection of representative structures, consideration of the limit state functions, calculation of reliability for the selected structures, selection of the target reliability index and calculation of load factors and resistance factors. The load and resistance models are reviewed. Statistical models of resistance (load carrying capacity) are summarized for strength limit state in bending, shear and compression. The reliability indices are calculated for several segments of a selected circular tunnel designed according to the tunnel manual report (Tunnel Manual). The novelty of this paper is the selection of the target reliability. In doing so, the uniform spectrum of reliability indices is proposed based on the probability paper. The final recommendation is proposed based on the closeness to the target reliability index.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.2
• /
• pp.91-95
• /
• 2019

A new experimental approach is proposed to detect a specific polymer dissolved in a liquid. Distinctive optical properties were found using a laser scattering technique when there is a polymer compound with almost no difference in optical properties (index of refraction) in a liquid phase. The index of refraction, which determines the refraction of light, is obtained by dissolving PCL and PLA. The used samples are biodegradable materials with similar properties and dissolved in a mixture of Chloroform 7: Methanol 3. To predict the optical properties, a 632-nm diode laser was used as the light source of the device, and an integrating sphere was used as the light receiver. Although PCL and PLA had a similar index of refraction of 1.46-1.48, the dissolved PCL showed a relative transmittance of 43%, and the dissolved PLA had a relative transmittance of 34%. The difference in optical properties of the pure polymer compound in the solid state or liquid state is not significantly different, and the difference in the dissolved state in the specific solvent is remarkable because the solubility differs in a specific solution and is randomly distributed.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.34-42
• /
• 2023

The reduction of operation and maintenance (O&M) costs is a critical factor in determining the competitiveness of wind energy. Predictive maintenance based on the estimation of remaining useful life (RUL) is a key technology to reduce logistic costs and increase the availability of wind turbines. Although a mechanical component usually has sudden changes during operation, most RUL estimation methods use the trend of a state index over the whole operation period. Therefore, overestimation of RUL causes confusion in O&M plans and reduces the effect of predictive maintenance. In this paper, two RUL estimation methods (load based and data driven) are proposed for the bearings of a wind turbine with the results of trend classification, which differentiates constant and increasing states of the state index. The proposed estimation method is applied to a bearing degradation test, which shows a conservative estimation of RUL.