• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.285-291
• /
• 2008

Active Queue Management(AQM) has been widely used for congestion avoidance in Transmission Control Protocol(TCP) networks. Although numerous AQM schemes have been proposed to regulate a queue size close to a reference level, most of them are incapable of adequately adapting to TCP network dynamics due to TCP's non-linearity and time-varying stochastic properties. To alleviate these problems, we introduce an AQM technique based on a dynamic neural network using the Back-Propagation(BP) algorithm. The dynamic neural network is designed to perform as a robust adaptive feedback controller for TCP dynamics after an adequate training period. We evaluate the performances of the proposed neural network AQM approach using simulation experiments. The proposed approach yields superior performance with faster transient time, larger throughput, and higher link utilization compared to two existing schemes: Random Early Detection(RED) and Proportional-Integral(PI)-based AQM. The neural AQM outperformed PI control and RED, especially in transient state and TCP dynamics variation.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.778-787
• /
• 2014

This study presents an input filter resonance mitigation method for an AC-DC matrix converter. This method combines the advantages of the one-cycle control strategy and the active damping technique. Unnecessary sensors are removed, and system cost is reduced by employing the grid-side input currents as feedback to damp out LC resonance. A model that includes the proposed method and the input filter is established with consideration of the delay caused by the actual controller. A zero-pole map is employed to analyze model stability and to investigate virtual resistor parameter design principles. Based on a double closed-loop control scheme, the one-cycle control strategy does not require any complex modulation index control. Thus, this strategy can be more easily implemented than traditional space vector-based methods. Experimental results demonstrate the veracity of theoretical analysis and the feasibility of the proposed approach.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.272-273
• /
• 2017

계통연계 인버터 시스템은 기존 L 필터보다 낮은 THD를 가지며 저가격의 작은 부피로도 효율적으로 고조파를 저감할 수 있는 LCL 필터를 많이 사용하고 있다. LCL 필터를 가지는 계통연계 인버터의 제어를 위해서는 PI 제어기가 사용되고 있으며 일반적으로 다수의 PI 제어기가 사용되고 있어 많은 제어기 이득을 동시에 설계해야 하는 한계를 지닌다. 본 논문에서는 LCL 필터를 갖는 3상 계통연계 인버터의 상태공간 모델을 이용하여 상태공간에서의 상태 궤환 제어기의 설계기법을 제시한다. 상태 궤환 제어기를 적용함으로서 다수의 PI 제어기 이득을 설계하는 번거로움을 줄일 수 있으며 체계적인 과정으로 제어기가 설계될 수 있다. 제안된 기법의 타당성과 성능이 PSIM 시뮬레이션을 통하여 입증된다.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.380-382
• /
• 2018

사이버 물리 시스템의 발달은 네트워크 기반 제어 시스템을 다양한 형태로 진화시키고 있다. 네트워크에서는 전송 지연과 전송 오류에 의해서 다양한 불규칙한 지연이 발생하고 지연에 강인한 제어기 설계가 요구되고 있다. 마코프 프로세서를 따르는 지연을 갖는 제어 시스템에서 제어기를 설계할 때에 많이 사용되는 모델중에 하나가 확장된 상태 벡터를 기반으로 한 마코프 점프 선형 시스템 모델이다. 본 연구에서는 이 모델을 이용하여 리아푸노프 안전성 조건으로부터 유도되는 선형 행렬 부등식의 안정성 조건으로부터 저복잡도를 가지고 제어기를 유도하는 직관적 방법을 제안한다. 제안된 알고리즘은 모의 실험을 통해서 성능을 확인하였으나, 직관적 방법 구조상에서 제한 조건의 수가 자유 변수의 수보다 많은 이유 때문에 성능이 배우 제한적임을 확인하였고, 이를 개선하기 위한 향후 연구가 요청됨을 확인하였다.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.991-999
• /
• 2013

In this paper, a fast transient buck converter using hysteresis PWM control is presented. The proposed control method is based on hysteresis control of the capacitor C voltage. This offers a faster transient response to meet the challenges of the power supply requirements for fast dynamic input and load changes. It also provides better stability and solves the compensation problem of the error amplifier in conversional voltage PWM control. Finally, the steady-state and dynamic operation of the proposed control method are analyzed and verified by simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.261-264
• /
• 1995

A scheme of observer-based MFAC(Model Following Acceleration Control) system is proposed for the DC servo position control system. The proposed system is competed of MFAC, feedback controller, and reduced-order state observer. As the servo motor is controlled by the acceleration command, the total servo system becomes the acceleration control system. Simulation results show that the proposed system have robust properties against parameter variations and external disturbances.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.11-18
• /
• 2019

One of the key objectives of control systems is to maintain a system in a specific stable state. To achieve this goal, a variety of control techniques can be used and it is often uses a feedback control method. As known this kind of control methods requires mathematical model of the system. This article presents seesaw unstable system with two propellers which are controlled without use of a mathematical model instead. The goal was to control it using training data. For system control we use a logistic regression technique which is one of machine learning method. We tested our controller on the real model created in our laboratory and the experimental results show that instability of the seesaw system can be fixed at a given angle using the decision boundary estimated from the classification method. The results show that this control method for structural equilibrium can be used with relatively more accuracy of the decision boundary.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_1
• /
• pp.889-896
• /
• 2020

We describe a new approach to the analyze the control performance of robotic manipulator based on the monitoring system. The structure of monitoring simulator is consist of seven modes such as control state mode, coordinate mode, input/output mode, program mode, parameters mode, and track mode. The applied control algorithme consists of an time varying feed-forward and feedback controller. The proposed scheme is simple in structure, fast in computation, and suitable for real-time implimemtation. Moreover, this scheme does not require any accurate dynamic modeling and values of parameters. Performance of the proposed monitoring system is illustrated by simulation and experiment for robot manipulator with six degrees of freedom.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.5 s.54
• /
• pp.57-65
• /
• 2003

This paper proposes an optimum design method of structural and control systems, using a 2-D truss structure as an example. The structure is subjected to initial static loads and disturbances. For the structure, a FEM model is formed. Using modal transformation, the equation of motion is transformed into modal coordinates, in order to decrease D.O.F. of the FEM model. To suppress the effect of the disturbances, the structure is controlled by an output feedback $H_{\infty}$ controller. The design variables of the combined optimal design of the control-structure systems are the cross sectional areas of truss members. The structural objective function is the structural weight. The control objective function is the $H_{\infty}$ norm, the performance index of control. The second structural objective function is the energy of the response related to the initial state, which is derived from the time integration of the quadratic form of the state in the closed-loop system. In a numerical example, simulations have been perform. Through the consideration of structural weight and $H_{\infty}$ norm, an advantage of the combined optimum design of structural and control systems is shown. Moreover, since the performance index of control is almost nearly optimiz, we can acquire better design of structural strength.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.246-253
• /
• 2013

This paper addresses the technology of active flow control for stabilizing a flow field. In order for flow field modeling from the control point of view, the huge-data set from CFD(computational fluid dynamics) are reduced by using a POD(Proper Orthogonal Decomposition) method. And then the flow field is expressed with dynamic equation by low-order modelling approach based on the time and frequency domain analysis. A neural network flow estimator from the pressure information measured on the surface is designed for the estimation of the flow state in the space. The closed-loop system is constructed with feedback flow controller for stabilizing the vortices on the flow field.