• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.9-14
• /
• 2011

We have investigated the electrical properties of $AlO_x$ thin film device. The device has been fabricated top-bottom electrode structure and its transport properties are measured in order to study the resistance change. Electrical properties with linear voltage sweep on a electrodes are used to show the variation of resistance of $AlO_x$ thin film device. Fabricated $AlO_x$ thin film device with MIM structure is changed from a high conductive On-state to a low conductive Off-state by the external linear voltage sweep. It is found that the initial resistance of the $AlO_x$ thin film is low-resistance On state and reversible switching occurs. Consequently, we believe $AlO_x$ thin film is a promising material for a next-generation nonvolatile memory and other electrical applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.71-76
• /
• 2014

In this paper, we propose a SMMA(Sliced-Multi Modulus Algorithm) adaptive blind equalization algorithm with Flag for high order QAM system. SMMA has improved characteristics by applying the multi contour to MMA. However, SMMA still has a limit that the mismatch problem causes the residual error in the steady state is large. In order to significantly reduce the residual error in the steady state, we propose SMMA, which is controlled by the binary Flag of '1 'or '0' obtained from SMMA and a decision-directed algorithm, and analyze the performance of the proposed algorithm. By computer simulation, it is confirmed that the proposed algorithm has improved performance highly in terms of a residual ISI and a residual error in the steady state compared with MMA and SMMA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.129-134
• /
• 2013

Previous research is focus on testcase generation automation using message sequence diagram based on metamodel. but that research is not enough for testcase genaeration automation using state diagram based metamodel. so in this paper is adopt Model Driven Architecture (MDA) mechanism for using metamodel and model transformation. and we suggest testcase automation mechanism using state diagram in UML. we will decrease cost of embedded software design and testcase genaration and increase quality of embedded software using metamodel mechanism.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.295-296
• /
• 2011

The DRM+ is the newest digital radio standard for in-band environment. Although various state of the art technologies are adopted, the performance evaluation information is not sufficient. It is hard that many countries and stations considering the DRM+ as their digital radio standard check the performance of DRM+. To evaluate the performance of the DRM+ system, this paper depicts the laboratory trial results of DRM+ standard. In the laboratory trial, the rack type DRM+ test bed is built. To reflect the practical broadcasting environment, various tests are executed. Many countries and stations can efficiently use these test results, which are considering converting their analog radio broadcasting to digital broadcasting.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.71-78
• /
• 2015

Since most education organizations such as Universities have a plenty of PCs, much electric power can be wasted if their power states are not managed properly. This paper introduces the RPM(Remote Power Management) software system implemented to reduce a waste of PC power in Universities. The System manager can monitor power state of all PCs in a University and turn off PCs or change power states of PCs to low power states. The RPM consists of three software modules. First, Power Controller, which is installed in each user PC, saves the power by changing low power state by utilizing low power algorithm proposed in this paper. Also it reports power state of its PC to Power Server on the state changed. Second, Power Server module gathers power state information of all PCs, stores them in a DB, and sends all or some parts of the information to Power Viewer whenever the manager asks. The manager can turn off or change a certain PC to low power state. We evaluated the performance of power saving for the RPM and the result showed achievement of 40% power saving.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.576-580
• /
• 2003

In order to assess the spectrum usage efficiency in mobile radio services, we consider the capacity limits of a CDMA system. The maximum achievable capacity per $km^2$ is viewed as a meaningful figure of merit for a cellular system and a method is proposed here to estimate the minimum achievable distance between adjacent base stations in the case of CDMA. The probability for entering in soft handover state is used as a limit for densification in a CDMA system. From this criterion, conditions on the minimum possible cell radius are derived.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.47-53
• /
• 2020

In the case of a failure due to equipment deterioration in the public address system or a worker's mistake during construction, broadcasting becomes impossible. In this situation, we have designed a more advanced management broadcast system that can broadcast. The broadcasting service is operated using main broadcasting device, and local broadcasting device operates separately only in the local area. If the main broadcasting device becomes inoperable, the procedure for transferring the control activates the device with the local broadcasting devices based on data backed up by the main controller. This paper proposes an improved method of the conventional emergency broadcasting device duplication method. The existing method could not use the standby equipment in the normal state, but in the proposed method, the standby equipment can be used as local broadcasting equipment in usually. This method enables stable system operation while minimizing resource waste due to redundant configuration of expensive devices.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.113-118
• /
• 2024

In this study, we designed and analyzed two main structures for effectively implementing the behavior of intelligent NPCs the Hierarchical Finite State Machine (HFSM) and the Behavior Tree, by creating experimental games. The HFSM was found to be efficient for complex interaction-centered actions where state changes and transitions are crucial, while the Behavior Tree was effective in dynamic environments where ease of modification and expansion are required for dynamic responses under various conditions. These structures were experimentally applied using the Unity engine to verify their efficiency. This study focused on the basic structure design and plans to apply these structures to an upcoming action-adventure escape game. The results of this research are expected to assist game developers in efficiently implementing intelligent NPCs, thereby contributing to the improvement of game quality and player satisfaction.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.418-426
• /
• 2022

Unlike OSR(observation space representation), the SSR(state space representation) augmentation system is suitable for a one-way broadcasting service because it provides the same corrections to all users in the service area. Due to this advantage, several GNSS(global navigation system) systems such as Galileo, BDS(beidou navigation satellite system), QZSS(quasi zenith satellite system) are establishing PPP (precise point positioning)/PPP-RTK precision positioning services based on SSR messages. Therefore, in this paper, we try to understand the trends of satellite-based PPP/PPP-RTK correction services by analyzing the system configurations, characteristics, and precise positioning performance of satellite-based SSR correction broadcasting services.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.94-101
• /
• 2019

Building a stable knowledge base is an important issue in the application of knowledge engineering. In this paper, we present an algorithm for detecting and locating discrepancies in the line of the reasoning process especially when discrepancies occur on belief values. This includes backtracking the rule firing from a goal node of the rule network. Retracting a belief function allows the current belief state to move back to another belief state without the rule firing. It also gives an estimate, called contribution measure, of how much the rule has an impact on the current belief state. Examining the measure leads the expert to locate the possible cause of problem in the rule. For non-monotonic reasoning, the belief retraction method moves the belief state back to the previous state. A tracing algorithm is presented to identify and locate the cause of problem. This also gives repair suggestions for rule refinement.