• 대한전기학회논문지
• /
• 제37권7호
• /
• pp.427-433
• /
• 1988

본 논문에서는 계통을 분할하여 분할된 지역간의 경계선로에 대학 조류측정을 하여 계통을 축소하는데 근거한 계통분할 알고리즘을 제시한다. 즉 전력계통을 여러개의 종속계통으로 나누면 반그시 경계선로가 파생되는데 이 경계선로 조류를 정확히 추정할 수 있으면 각 종속계통에 대한 상태추정을 개별적으로 행할 수 있으므로 각 종속계통에 대한 경계선로 조류를 추정하는 면밀한 방법을 제시하였다. 까라서, 제시된 알고리즘을 쓰면 종속계통에서 상태추정을 개별적으로 수행할 수 있기 때문에 계산시간과 메모리 용량을 현저히 줄일 수 있다. 제시된 알고리즘을 IEEE 샘플계통에 적용하여 설계통 적용 가능성을 보였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권9호
• /
• pp.359-364
• /
• 2006

In modern EMS, state estimation is used as a tool for monitoring how the power system operates. A state estimator iteratively calculates the voltage profile of the currently operating power system with voltage, current, and power measurements gathered from the entire system. It is usually assumed that all the measurements are obtained simultaneously. It, however, is not practically possible to maintain the synchronism of the measurements data. Recently, phasor measurements synchronized by satellites are used for the operation of the power systems. This paper describes the state estimator modified to support the processing of synchronized phasor measurements. Synchronized phasor measurements are found to provide synchronism of measurement data and improve the nccuracy/redundancy of the results of running it are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.537-540
• /
• 1998

This thesis deals with the design problem of the state estimator for digital servo system. Digital servo system has input time delay, which depends on the size of control algorithm. The delayed input is a factor that brings out the state estimation error. So, in order to reduce this state estimation error of the system, we proposes a state estimator in which the delayed input of the system is considered. At first, a discrete-time state-space model is established accounting for the delayed input. Next, the state estimator is designed based on this model. we employ Kalman filter algorithm in design of the state estimator. The performance of proposed state estimator is exemplified via some simulations and experiment for servo system. And robustness of the proposed estimator to modelling error by variation of the system parameter is also shown in these simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.178-180
• /
• 2001

State estimation in power system is to estimate state variable value which minimizes the error from the real state measured by the gauge and connection state of the circuit breaker. In the past, it was difficult to determine measure function considering the correlation of the measured values. In this paper, an extended state estimation is proposed to process easily various kinds of estimation variable. The proposed algorithm is developed by expanding state variable concept based on many measured values and treating correlation between estimation variable and state variable, it is considered that the state variable satisfy some limitations named "Equality Limitation conditions".

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 추계학술대회 학술발표 논문집
• /
• pp.350-355
• /
• 1997

The problem of mathematical model for an unknown system by measureing its input-output data pairs is generally referred to as state estimates. The state estimation problem is often of importance in its own right since we may want to know the value of the states. For instance, in navigation, we may take noisy positional fixes using satelite or radar navigation, and the estimator can use these measurements to provide accurate estimates of current position, hedaing, and velocity. And the state estimates can also be used for control purposes. Then it is very important to know the state of plant. In this paper, the theory of the minimization of a loss function was used to design the fuzzy system. Here, the used teory is Least Square Esimation method. This parametrization has the Linear in the parameters charcteristic that allows standard parameter estimation technique to be used to estimate the parameters of the fuzzy system. The combination of the fuzzy system and the estimation m thod then performs as a nonlinear estimator. If several fuzzy label are defined for the input variables at the antecedent part, the fuzzy system then behaves as a collection of nonlinear estimators where different regions of rules have different parameters. In simulation results, the fuzzy model controlled a difference in the structure between the actual plant and the fuzzy estimator. It is also proved that the fuzzy system is equivalent to its transformed system. therefore we was able to get the state space equation of system with the estimated paramater.

• Journal of applied mathematics & informatics
• /
• 제39권5_6호
• /
• pp.805-811
• /
• 2021

Currently, batteries use commonly as energy sources for mobile electric devices. Due to the high density of energy, the energy storage state of a battery is very important information. To know the battery's energy storage state, it is necessary to find out the open state voltage of the battery. The open state voltage calculates with a mathematical model, but the computation of the real time state is complicated and requires many calculations. Therefore, the state observer designs to estimate in real time the battery open-circuit voltage as disturbance including model error. Using the estimated open voltage and applying it to the state estimation algorithm, we can estimate the charge. In this study, we first estimate the open-circuit voltage and design an estimation algorithm for estimating the state of battery charge. This includes errors in the system model and has a robust characteristic to noise. It is possible to increase the precision of the charge state estimation.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1729-1738
• /
• 2014

The offline verification of state of charge estimation, power estimation, fault diagnosis and emergency control of battery management system (BMS) is one of the key technologies in the field of electric vehicle battery system. It is difficult to test and verify the battery management system software in the early stage, especially for algorithms such as system state estimation, emergency control and so on. This article carried out the virtual environment modeling for verification of battery management system. According to the input/output parameters of battery management system, virtual environment is determined to run the battery management system. With the integration of the developed BMS model and the external model, the virtual environment model has been established for battery management system in the vehicle's working environment. Through the virtual environment model, the effectiveness of software algorithm of BMS was verified, such as battery state parameters estimation, power estimation, fault diagnosis, charge and discharge management, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.107-110
• /
• 1988

The quadratic cost function J(x) and the normalized residuals $r_N$ are conventionally used for identifying the presence and location of bed measurements in power system state estimation. These are "post estimation" tests and therefore require the complete re-estimation of system states whenever bed data is identified. This paper presents a pre-filter for reducing errors of the raw measurements using an adaptive filter. Each measurement is processed by the adaptive filter before being used in the state estimation. The performance of the adaptive filter is tested and the results are shown in this paper.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2339-2345
• /
• 2011

This paper proposes a new multi-filtered inertial navigation system to estimate the attitude and position of moving objects. This system has two states, the one is attitude state and the other is position/velocity state. For compensating IMU sensor errors, each of the two states uses a different filter: the attitude state uses the EKF and the position state uses the UPF. The fast and precise characteristics of the EKF have been properly utilized for the attitude estimation, while superior dynamic characteristics of the UPF have been fully adopted for the position estimation. The combination of these two filters in an inertial navigation system improves the system performance to be faster and more accurate. Experimental results demonstrate the superiority of this approach comparing to the conventional ones.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2312-2321
• /
• 1994

In this work the dynamics of an electromagnetic levitation system is described by a set of three first order nonlinear ordinary differential equations. The objective is to design a digital linear controller which takes the inherent instability of the uncontrolled system and the disturbing force into consideration. The controller is made by employing digital linear quadratic(LQ) design methodology and the unknown state variables are estimated by the kalman filter. The state estimation is performed using not only an air gap sensor but also both an air gap sensor and a piezoelectric accelerometer. The design scheme resulted in a digital linear controller having good stability and performance robustness in spite of various modelling errors. In case of using both a gap sensor and an accelerometer for the state estimation, the control input was rather stable than that in a system with gap sensor only and the controller dealt with the disturbing force more effectively.