• 전자공학회논문지SC
• /
• 제42권1호
• /
• pp.33-37
• /
• 2005

마이크로믹서는 Bio-MEMS 혹은 μ-TAS 분야에서 중요한 역할을 수행한다. 혼합은 두 유체의 난류 상태와 상호확산에 의해 발생된다. 마이크로채널 내에서는 레이놀즈수가 작기 때문에 (Re << 2000) 난류가 발생되기 어려우므로 주로 상호확산에 의해서만 혼합된다. 따라서 두 유체가 적정하게 혼합되기 위해서는 긴 채널이 요구된다. 본 논문에서는 혼합에 소요되는 길이를 줄이기 위해서 PMN-PT에 의해 발생된 초음파에 의해 혼합되는 새로운 믹서를 제안하였다. 챔버 내에 발생된 초음파는 두 유체에 의해 생성된 경계면과 수직한 방향으로 방사된다. 사용된 두 유체는 상하방향으로 경계층을 이룬다. 혼합 상태는 NaOH와 페놀프탈렌의 반응에 따른 색상 변화론 관찰하여 측정하였다.

• 보존과학회지
• /
• 제28권4호
• /
• pp.329-341
• /
• 2012

마애화령석지장은 해안가에 인접해 있고 해수에 의해 주기적으로 일정 부분이 침수되는 특수한 입지적 조건에 있다. 마애불을 구성하는 암석은 중립질 또는 조립질을 띠는 흑운모화강암으로 내구성이 강한 편이나, 암석 내부에 침투한 염용액과 주변 환경과의 복잡한 상호작용에 의해 구성암석의 색과 강도 및 내구성 등 물성이 변화된 상태이다. 마애불을 이루는 암석은 염(NaCl)결정화 작용에 의한 표면층 박리박락이 심각하다. 박리박락(14.6%)은 해수의 주요 경계면을 중심으로 대기에 상시 노출되는 상부에 집중되어 있다. 반면, 해수에 의해 주기적으로 침수되는 암괴 하부는 오염물이 침착되어 흑화층을 나타내며 이와 함께 갈색변색과 생물오염이 중첩된 상태이다. 표면 오염 및 변질은 흑색 변색(29.2%), 황색 변색(14.1%), 갈색 변색(4.4%), 녹색 변색(2.9%)의 순으로 높은 훼손율(50.5%)을 나타냈다. 또한 해수면을 경계로 상부가 해수에 침수되는 하부보다 초음파 속도가 낮고 편차가 커 많은 물성 변화가 있었음을 알 수 있으며, 특히 해수 침투 경계면의 표면 물성이 취약함을 확인하였다.

• 한국물환경학회지
• /
• 제29권2호
• /
• pp.247-258
• /
• 2013

A grid-based configuration of Land Surface Models (LSMs) coupled with a climate model can be advantageous in impact assessment of climate change for a large scale area. We assessed the applicability of Common Land Model (CoLM) to runoff and land surface temperature (LST) simulations at the domain that encompasses the Nakdong river basin. To establish a high resolution model configuration of a $1km{\times}1km$ grid size, both surface boundary condition and atmospheric inputs from the observed weather data in 2009 were adjusted to the same resolution. The Leaf Area Index (LAI) was collected from MODerate esolution Imaging Spectroradiometer (MODIS) and the downward short wave flux was produced by a nonstationary multi-site weather state model. Compared with the observed runoffs at the stations on Nakdong river, simulated runoffs properly responded to rainfall. The spatial features and the seasonal variations of the domain fairly well were captured in the simulated LSTs as well. The monthly and seasonal trend of LST were described well compared to the observations, however, the monthly averaged simulated LST exceeded the observed up to $2^{\circ}C$ at the 24 stations. From the results of our study, it is shown that high resolution LSMs can be used to evaluate not only quantity but also quality of water resources as it can capture the geographical features of the area of interest and its rainfall-runoff response.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.171-171
• /
• 2009

The electrodes are usually made of a porous mixture of carbon-supported platinum and ionomers. $SnO_2$ particles provide as supports that have been used for DMFCs, and it have high catalytic activities toward methanol oxidation. The main advantage of $SnO_2$ supported electrodes is that it has strong chemical interactions with metallic components. The high activity to a synergistic bifunctional mechanism in which Pt provides the adsorption sites for CO, while oxygen adsorbs dissociative on $SnO_2$. The reaction between the adsorbed species occurs at the Pt/$SnO_2$ boundary. The morphological observations were characterized by FESEM and transmission electron microscopy (TEM). $SnO_2$ particles crystallinity was analyzed by the X-ray diffraction (XRD). The surface bonded state of the $SnO_2$ particles and electrode materials were observed by the X-ray photoelectron spectroscopy (XPS). The electric properties of the Pt/$SnO_2$ catalyst for methanol oxidation have been investigated by the cyclic voltametry (CV) in 0.1M $H_2SO_4$ and 0.1M MeOH aqueous solution. The peak current density of methanol oxidation was increased as the $SnO_2$ content in the anode catalysts increased. Pt/$SnO_2$ catalysts improve the removal of CO ads species formed on the platinum surface during methanol electro-oxidation.

• Corrosion Science and Technology
• /
• 제10권1호
• /
• pp.1-5
• /
• 2011

The major purpose of the present study is to evaluate the performance of various galvanized (GI) or galvannealed (GA) mild steels and AHSS in stamping applications. Finite Element Analysis (FEA) of selected stamping operations was conducted to estimate the critical pressure boundary conditions that exist in practice. Using this information, laboratory tribotests, e.g. Twist Compression (TCT), Deep Drawing (DDT) and Strip Drawing (SDT) Tests, were developed to evaluate the performance of selected lubricants and die materials/coatings in forming galvanized steels of interest. The sheet materials investigated included mild steels and AHSS (e.g. DP600 GI/GA, DP780 GI/GA, TRIP780 GA and DP980 GI/GA). Experimental results showed that galvanized material resulted in more galling, while galvannealed material showed more powdering and flaking. The surface roughness and chemical composition of galvanized sheet materials affected the severity of galling under the same testing conditions, i.e. lubricants and die materials/coatings. The results of this study helped to determine the critical interface pressure that initiates lubricant failure and galling in stamping selected galvanized sheet materials. Thus, to prevent or postpone the critical interface conditions, the results of this study can be used to select the optimum combination of galvanized sheet, die material, die coating and lubricant for forming structural automotive components.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.210-211
• /
• 2004

The effect of oscillating on the unsteady laminar flow past a circular cylinder is numerically investigated in the present study. Our study is to analyze the vortex formation behind a circular cylinder for different rotary oscillation conditions. And then we are study to portray the unsteady dynamics of wake flows. We decide lock-on region by observing the phase switching phenomena We classify the vortex formation patterns in the primary lock-on region The present study is to identify the quasi-periodic state around lock-on region. At the boundary between lock-on and non-lock-on the shedding frequency is bifurcated. After the bifurcation, one frequency follow the forcing frequency ($S_f$) and the other returns to the natural shedding frequency ($St_0$). In the quasi-periodic state, the variation of magnitudes and relevant phase changes of $C_L$ with forcing phase are examined.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.229-246
• /
• 1996

A mechanistic model has been developed to predict the release behavior of fission gas during steady-state irradiation of LWR UO$_2$ fuel. Under the assumption that UO$_2$ grain surface is composed of fourteen identical circular faces and grain edge bubble can be represented by a triangulated tube around the circumference of three circular grain faces, it introduces the concept of continuous formation of open grain edges tunnels that is proportional to grain edge swelling. In addition, it takes into account the interaction between the gas release from matrix to grain boundary and the reintroduction of gas atoms into the matrix by the irradiation-induced re-solution of grain face bubbles. It also treats analytically the behavior of intragranular, intergranular, and grain edge bubbles under the assumption that both intragranular and intergranular bubbles are uniform in both radius and number density. Comparison of the present model with experimental data shows that the model's prediction produces reasonable agreement for fuel with centerline temperatures of 1000 to 140$0^{\circ}C$, wide scatter band for fuel with centerline temperatures lower than 100$0^{\circ}C$, and underprediction for fuel with centerline temperatures higher than 140$0^{\circ}C$.

• 한국실내디자인학회논문집
• /
• 제17권3호
• /
• pp.86-93
• /
• 2008

The purpose of this study is to find out how the otherness philosophy reveals itself in the principle of F.O.A construction space creation. The traditional philosophy of totality is self-centered and thoughts are based on the subject. It couldn't escape from the world associated with the self, and has subordinated the other to the main body. But the philosophy of otherness transcends the subject, to the open, creative way of thinking which acknowledges deconstruction, decentralization, and non-hierarchy. This is very similar to contemporary architecture, which pursuits change, and also to the current state of society. In construction by the construction group F.O.A, which is doing notable activity this generation, there is an attempt to transcend the fixed subject which is seen in the otherness discussion, and realize recategorization by overcoming the boundaries of subject and object. First, by the realization of landscape architecture using a topographical folding technique, boundaries of the subject and object are demolished in the relationship of the landscape construction, and recategorization. Second, by breaking up the meaning of the surface which is a visual and physical boundary for both the internal and external, recategorization is being done. Third, by making the boundary between the interior and exterior indistinct, cognitive threshold is dissolved, and the relationship between the subject and object is being recategorization. In conclusion, we can see that the many recategorization phenomenons that are happening in the F.O.A construction show the otherness that escapes from the conventional and stationary relationship, and recognizes each other at the same time, forming new relationships.

• 마이크로전자및패키징학회지
• /
• 제7권4호
• /
• pp.31-35
• /
• 2000

반도체 칩과 리드프레임을 접착하고 있는 얇은 접착제층에 전단하중이 가해질 때 발생하는 응력상태를 조사하고 있다. 계면 응력상태를 해석하기 위해서 경계요소법이 사용되고 있다. 선형 탄성이론을 적용하여 해석하면, 강체와 접착제의 계면이 자유 경 계면과 만나는 부분에서 $\gamma^{\lambda=1}$(0<1<1) 형태의 응력 특이성이 존재한다. 이러한 특이성으로 인해, 모서리 균열이나 계면 박리가 발생할 수 있다.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.25-33
• /
• 2000

The reorientations of the atoms by frictional shear deformation at the surface induce cracks at the boundary of the grain. The cracks grow and propagate in regions where the hydrostatic component of stress is least compressive because the compressive component restores the cracks by three-dimensional crystallizing $\pi$-bondings. The materials with Lder's band have very small amount of wear at the initial state. It suggests that initial frictional shear deformation be consumed to the formation of the Lder's band. The average wear amounts of the materials increase very steeply as the øu the stress-strain ratio at the ultimate point, decreases.