• Wind and Structures
• /
• 제3권1호
• /
• pp.11-21
• /
• 2000

This paper presents results of modeling of the passive contaminant diffusion from a continuous line finite-size source located on the underlying surface of a neutral near-ground atmospheric layer obtained by using the non-local two-parameteric turbulence model and the transport equation of mean concentration. In the proposed diffusion model the turbulent diffusion coefficient changes not only with the vertical coordinate but also with the distance downstream from the source according to the experimental data. The results of the modeling reproduce structural features of the concentration field.

• Ocean Systems Engineering
• /
• 제6권3호
• /
• pp.245-264
• /
• 2016

The iterative boundary element method (IBEM) developed originally before for cavitating two-dimensional (2-D) and three-dimensional (3-D) hydrofoils moving under free surface is modified and applied to the case of 2-D (two-dimensional) airfoils and 3-D (three-dimensional) wings over water. The calculation of the steady-state flow characteristics of an inviscid, incompressible fluid past 2-D airfoils and 3-D wings above free water surface is of practical importance for air-assisted marine vehicles such as some racing boats including catamarans with hydrofoils and WIG (Wing-In-Ground) effect crafts. In the present paper, the effects of free surface both on 2-D airfoils and 3-D wings moving steadily over free water surface are investigated in detail. The iterative numerical method (IBEM) based on the Green's theorem allows separating the airfoil or wing problems and the free surface problem. Both the 2-D airfoil surface (or 3-D wing surface) and the free surface are modeled with constant strength dipole and constant strength source panels. While the kinematic boundary condition is applied on the airfoil surface or on the wing surface, the linearized kinematic-dynamic combined condition is applied on the free surface. The source strengths on the free surface are expressed in terms of perturbation potential by applying the linearized free surface conditions. No radiation condition is enforced for downstream boundary in 2-D airfoil and 3-D wing cases and transverse boundaries in only 3-D wing case. The method is first applied to 2-D NACA0004 airfoil with angle of attack of four degrees to validate the method. The effects of height of 2-D airfoil from free surface and Froude number on lift and drag coefficients are investigated. The method is also applied to NACA0015 airfoil for another validation with experiments in case of ground effect. The lift coefficient with different clearance values are compared with those of experiments. The numerical method is then applied to NACA0012 airfoil with the angle of attack of five degrees and the effects of Froude number and clearance on the lift and drag coefficients are discussed. The method is lastly applied to a rectangular 3-D wing and the effects of Froude number on wing performance have been investigated. The numerical results for wing moving under free surface have also been compared with those of the same wing moving above free surface. It has been found that the free surface can affect the wing performance significantly.

• 웰빙융합연구
• /
• 제4권1호
• /
• pp.1-10
• /
• 2021

Purpose: The study sought to uncover the effect of emotional labour strategies (surface acting and deep acting) on job satisfaction and emotional exhaustion. The study also purposed to analyse the moderating effect of organisational support (supervisory support and co-worker support) and the role of gender on emotional labour connotations. Research design, data and methodology: A conceptual framework was developed using extant literature which led to the examination of deep acting and surface acting, which are the two main strategies of emotional labour. The outcome variables were emotional exhaustion and job satisfaction. Data was collected from front line employees of banks and was analysed using SEM-AMOS version 21. Results: It was revealed, in this study, that surface acting is inversely related to job satisfaction and positively related to emotional exhaustion, whereas deep acting was positively related to job satisfaction and inversely related to emotional exhaustion. The roles of gender and organisational support were also confirmed. Conclusions: The study therefore concluded that deep acting is the most ideal strategy of emotional labour as it leads to job satisfaction and reduced emotional exhaustion. Surface acting is a harmful emotional labour strategy.

• 한국레이저가공학회지
• /
• 제2권1호
• /
• pp.22-29
• /
• 1999

This work was carried out as a fundamental experiment to fabricate a Graded-Boundary Ni/Steel material using a laser beam. A Ni sheet was placed on a steel substrate, and then a series of high power $CO_2$ laser beams were irradiated on the surface in order to produce a homogeneous alloyed layer. The processing parameters were : 4 ㎾ laser power, 2m/min traverse speeds, -2mm defocuing, 17 l/min sheiding gas flow rates. The sequential repetition of the laser surface alloying treatment up to 4 times, resulted in about 5mm thick of fair compositional gradient systems. In order to determine the microstructure, phase and compositional profiles in this material, optical microscopy, XRD and EDS were used. The compositions varied from 66% to 0% for Ni and 34% to 100% for Fe in this material The microstructures were typical morphologies of rapid solidification and solid-state cooling. Since compressive stress was formed in the heat affected region due to martensitic transformation, while relative tensile stress was developed in the alloyed region, cracks were formed between the alloyed region and the substrate region.

• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.288-295
• /
• 2017

In order to improve the efficiency and reliability of the machine, the friction should be minimized. The most widely used method to minimize friction is to maintain the fluid lubrication state. However, we can reduce friction only up to a certain limit because of viscosity. As a result of several recent studies, surface texturing has significantly reduced the friction in highly sliding machine elements, such as mechanical seals and thrust bearings. Thus far, theoretical studies have mainly focused on isothermal/iso-viscous conditions and have not taken into account the heat generation, caused by high viscous shear, and the temperature conditions on the bearing surface. In this study, we investigate the effect of dimple depth and film-temperature boundary conditions on the thermohydrodynamic (THD) lubrication of textured parallel slider bearings. We analyzed the continuity equation, the Navier-Stokes equation, the energy equation, and the temperature-viscosity and temperature-density relations using a computational fluid dynamics (CFD) code, FLUENT. We compare the temperature and pressure distributions at various dimple depths. The increase in oil temperature caused by viscous shear was higher in the dimple than in the bearing outlet because of the action of the strong vortex generated in the dimple. The lubrication characteristics significantly change with variations in the dimple depths and film-temperature boundary conditions. We can use the current results as basic data for optimum surface texturing; however, further studies are required for various temperature boundary conditions.

• 전자공학회논문지SC
• /
• 제37권3호
• /
• pp.19-32
• /
• 2000

본 논문이 제안하는 제어기는 새로운 가변 경계층을 이용하여 가변 구조 시스템의 정확한 추적 제어가 이루어지게 한다. 지금까지 가변 경계층을 적용한 가변 구조 제어기는 고정된 슬라이딩면의 사용으로 초기 위치가 제한되었으며 이로 인해 임의의 초기 위치에서부터 시스템 상태 궤적의 채터링을 감소시킬 수 없다. 그러나 제안된 제어기는 선형 시변 슬라이딩면을 이용함으로서 모든 상태로부터 외부 외란과 불확실한 매개변수에 대한 강인한 특성을 지니게 되며 새로운 가변 경계층의 적용으로 채터링과 추적 성능에서 기존 방법에 비해 우수한 특성을 보이고 있다. 따라서 본 논문은 2 관절 매니퓰레이터에 제안된 알고리즘을 적용하여 제시한 방법의 타당성을 입증하였다.

• Journal of Ginseng Research
• /
• 제25권2호
• /
• pp.82-88
• /
• 2001

This study was carried out to investigate a point of difference between normal and inferior Korean red ginseng (Naeback red ginseng = red ginseng with white part of clear boundary in phloem and/or xylem of ginseng body, saengnaeback red ginseng red ginseng with white part of indistinct boundary). White part with clear or indistinct boundary in center of ginseng body was observed in inferior red ginseng (naeback and saengnaeback red ginseng), and the differences in the internal color intensity was also found with naked eye. In hunter color values of normal and inferior parts of red ginseng in accordance with particle size, L value was increased with a diminishment in particle size, while a and b value were decreased. Absorbance at visible spectrum did not differ from water and 70% ethanol extract from normal and inferior parts of red ginseng, but absorbance in UV spectrum of extract from naeback part showed higher than those of normal and saengnaeback part. In comparison of intrastructure by electron microscope, the horizontal and vertical section of cortex and pith layer from normal part showed the very dense state, but small holes were found in naeback part of red ginseng by naked eye and electron microscope. The specific surface area of normal, naeback and saengnaeback part appeared 3.02, 3.33 and 6.55 ㎡/g, respectively. From above results, we consider saengnaeback red ginseng is red ginseng in the intermediate process which normal red ginseng changes to naeback red ginseng.

• Nuclear Engineering and Technology
• /
• 제38권2호
• /
• pp.139-146
• /
• 2006

An experimental study was performed to evaluate the effects of surface coating and an enhanced insulation structure on the downward facing boiling process and the critical heat flux on the outer surface of a hemispherical vessel. Steady-state boiling tests were conducted in the Subscale Boundary Layer Boiling (SBLB) facility using an enhanced vessel/insulation design for the cases with and without vessel coatings. Based on the boiling data, CHF correlations were obtained for both plain and coated vessels. It was found that the nucleate boiling rates and the local CHF limits for the case with micro-porous layer coating were consistently higher than those values for a plain vessel at the same angular location. The enhancement in the local CHF limits and nucleate boiling rates was mainly due to the micro-porous layer coating that increased the local liquid supply rate toward the vaporization sites on the vessel surface. For the case with thermal insulation, the local CHF limit tended to increase from the bottom center at first, then decrease toward the minimum gap location, and finally increase toward the equator. This non-monotonic behavior, which differed significantly from the case without thermal insulation, was evidently due to the local variation of the two-phase motions in the annular channel between the test vessel and the insulation structure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.140-143
• /
• 1997

The present study is concerned with the hydrostatic extrusion process of copper-clad aluminium bar to investigate the basic flow characteristics. Considering the bonding mechanism of bi-metal contact surface as cold pressure welding, the normal pressure and the contact surface expansion are selected as process parameters governing the bonding condition. The critical pressure required for the bonding at the interface is obtained by solving a "local extrusion" using a slip line meyhod. A viscoplastic finite element method is used to analyze the steady state extrusion process. The boundary profile of bi-metal rod is predicted by tracking a particle path adjacent to interface surface. The variations of contact surface area and the normal pressure along the interface profile are predicted and compared to those by experiments.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2349-2357
• /
• 1992

본 연구에서는 일정한 조도의 거친 평판이 갑자기 매끈한 평판으로 변할 때 (Fig.1 참고) 평판 위에서 발달하는 난류경계층에 관하여 연구하였다. 이때 하류에 서 난류 경계층은 위에서 설명했듯이 완전히 발달한 난류 경계층과는 상당히 다르다. 특히 대부분의 난류 모델은 완전히 발달된 평형상태의 경계층에서의 실험자료를 이용 하여 개발되었기 때문에 이러한 과도 구역에서 합리적으로 적용되기가 어렵다. 과도 구역에서 평균속도와 난류 특성치를 체계적으로 계측하기 위해서는 전단응력을 직접 계측하는 것이 중요하다. 그러나 아직 전단응력을 직접 계측한 연구는 없는 실정이 다. 본 논문에서는 최근에 제안된 CPM(computational preston tube method)를 이용 하여 과도지역에서 전단응력을 직접 측정하여 난류 경계층의 구조를 연구하였다.