• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.536-546
• /
• 2006

Painterly animation is a method that expresses painterly images with a hand-painted appearance from a video, and the most crucial element for it is the temporal coherence of brush strokes between frames. A motion map is proposed in this paper as a solution to the issue of maintaining the temporal coherence in the brush strokes between the frames. A motion map is the region that frame-to-frame motions have occurred. Namely, this map refers to the region frame-to-frame edges move by the motion information with the motion occurred edges as a starting point. In this paper, we employ the optical flow method and block-based method to estimate the motion information. The method that yielded the biggest PSNR using the motion information (the directions and magnitudes) acquired by various methods of motion estimation has been chosen as the final motion information to form a motion map. The created motion map determine the part of the frame that should be re-painted. In order to express painterly images with a hand- painted appearance and maintain the temporal coherence of brush strokes, the motion information was applied to only the strong edges that determine the directions of the brush strokes. Also, this paper seek to reduce the flickering phenomenon between the frames by using the multiple exposure method and the difference map created by the difference between images of the source and the canvas. Maintenance of the coherence in the direction of the brush strokes was also attempted by a local gradient interpolation to maintain the structural coherence.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.1-5
• /
• 2012

$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ hollow fiber with o.d. 1.02 mm and i.d. 0.437 mm were fabricated by a phase-inversion spinning technique.The starting $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ precursor was synthesized by the polymerized complex method and then calcined at $900^{\circ}C$. As-prepared powder was dispersed in a polymer solution, and extruded as form of hollow fiber through a spinneret. Finallydense $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ hollow fiber membrane was obtained by sintering for 2 h at $1,080^{\circ}C$ for the application of oxygen separation. In addition, despite a very thin membrane with 0.58 mm, the BSCF hollow fiber membrane possessed a proper mechanical strength of 602.5 MPa.

• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.399-404
• /
• 1998

Genipin was obtained from hydrolysis of geniposide isolated from gardenia fruits with ${\beta}-glucosidase$. Reaction of genipin with glycine, alanine, histidine, lysine, phenylalanine and glutamate in aqueous buffer solution converted colorless starting materials to blue pigments. Effect of pH for the formation of blue pigments was tested using UV/Vis spectrophotometer. The optimum pH for the formation of blue pigments was 7.0. No pigment and trace amounts were formed at acidic (pH 3.0) and alkaline (pH 12.0) conditions, respectively. The amount and tincture of blue color were distinct with different amino acids. In contrast with lysine $({\lambda}_{max}=573\;nm)$, glycine $({\lambda}_{max}=595\;nm)$, phenylalanine $({\lambda}_{max}=602\;nm)$ and alanine $({\lambda}_{max}=595\;nm)$, the reaction of genipin with histidine $({\lambda}_{max}=601\;nm)$ and glutamate $({\lambda}_{max}=601\;nm)$ produced relatively small amounts of blue pigments. Rate constants for the formation of blue pigments from genipin with amino acids at various temperatures $(60,\;70,\;80,\;90^{\circ}C,\;pH\;7.0\;phosphate\;buffer)$ were obtained. Rate constants of genipin with basic amino acids were larger than neutral or acidic amino acids. Arrhenius activation energies of the formation of blue pigments indicated that activation energy of glycine $(E_A=9.8\;kcal/mol)$ was especially lower than those of other amino acids $(E_A=13.3{\sim}15.4\;kcal/mol)$.

• Journal of Families and Better Life
• /
• v.29 no.4
• /
• pp.109-123
• /
• 2011

The importance of finance in our society is truly absolute, and the of financial consumers who cope with the financial environment is becoming. Recently, many authorities in Korea to perceive the absence of serious economic or financial consumer education in order to find a fundamental solution for such a phenomenon, there is a growing need to introduce financial consumer education. This study aims to review the comprehension power of finance among consumers are college students in this society the importance of finance is becoming greater, and to a way promote financial consumer education by analyzing the demand level for The main results obtained from the include the following. First, as a result of reviewing the characteristics of respondents, their average age was 21.8 years old, and on average they each had 4.16 credit cards. Most of them had no experience of receiving financial consumer education in their teenage years, and their interest level in investment was shown to be above average. Second, as a result of reviewing their comprehension power of finance, it was shown to be 64.10 points on average their comprehension of the income area was the highest, their comprehension money management was shown to be the lowest. Third, as a result of reviewing the perception level of the provision of financial consumer education, it was shown to be very low the perception level of on-line and off-line financial consumer education provided by the YMCA was shown to be the highest. Fourth, as a result of reviewing the level financial consumer education, it was shown to be very high. For the level for institutions financial consumer education, financial institutions the highest. For the level for the method of financial consumer education, respondents chose practical experience the most and education books the least. For the intention of participating in financial consumer education, most respondents that they would participate, and most of them answered that the starting period should be the teenage years and childhood Therefore, as a result, most university student's consumers have concerned on financial education and financial inportance, it need to educate for the university student's consumers, and it need to develop technical tools and contents for ficancial education.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.884-889
• /
• 2002

In order to investigate the calcium phosphate forming ability of nanocrystalline $ZrO_2$ film, we prepared $ZrO_2/Si$ structure by using a chemical solution deposition with a zirconium naphthenate as a starting material. Precursor sol was spin-coated onto the (100)Si substrate and prefired at 500$^{\circ}C$ for 10 min in air, followed by final annealing at 800$^{\circ}C$ for 30 min in air. Crystallinity of the annealed film was examined by X-ray diffraction analysis. Surface morphology and surface roughness of the film were characterized by field emission-scanning electron microscope and atomic force microscope. After annealing, nanocrystalline $ZrO_2$ grains were obtained on the surface of the film with a homogeneous interface between the film and substrate. After immersion for 1 or 5 days in a simulated body fluid, formation of calcium phosphate was observed on $ZrO_2$ film annealed at 800$^{\circ}C$ by energy dispersive X-ray spectrometer. The fourier transform infrared spectroscopy revealed that carbonate was substituted into the calcium phosphate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.74-79
• /
• 2019

The military vehicle produces electric power through an engine-integrated serial hybrid generator that is connected to the engine and does not have a separate generator installation space. However, depending on the mechanical characteristics of the connection between the generator and the engine, iron oxide for internal rusting and lubrication grew scattered. The iron oxide is adhered to the starter to deteriorate the starting performance, and there is a problem that the noise of the leg due to wear of the gear is increased. To solve this problem, the connection spline material and the surface treatment of the engine were improved and the shape was changed to a grease sealing type to prevent the generation of iron oxide inside. As the shape of the generator connector composing the shafting system was changed, the integrity of the structure was confirmed through the torsional endurance test. In addition, through the actual vehicle load test, it was verified that no corrosion occurred during the target life span without internal corrosion. It was confirmed that the anti-scattering structure of the grease effectively suppresses the generation of iron oxide, thereby reducing the noise generated from the generator. In this paper, we propose a fundamental solution to the degradation of the starter and the noise generation by preventing the back corrosion caused by the serial hybrid generator installed between the engine and the transmission.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.29-43
• /
• 2019

The calibration of microscopic traffic simulation models has received much attention in the simulation field. Although no standard has been established for it, a genetic algorithm (GA) has been widely employed in recent literature because of its high efficiency to find solutions in such optimization problems. However, the performance still falls short in simulation analyses to support fast decision making. This paper proposes a new calibration procedure using a dual GA and central composite design (CCD) in order to improve the efficiency. The calibration exercise goes through three major sequential steps: (1) experimental design using CCD for a quadratic response surface model (RSM) estimation, (2) 1st GA procedure using the RSM with CCD to find a near-optimal initial population for a next step, and (3) 2nd GA procedure to find a final solution. The proposed method was applied in calibrating the Gipps car-following model with respect to maximizing the likelihood of a spacing distribution between a lead and following vehicle. In order to evaluate the performance of the proposed method, a conventional calibration approach using a single GA was compared under both simulated and real vehicle trajectory data. It was found that the proposed approach enhances the optimization speed by starting to search from an initial population that is closer to the optimum than that of the other approach. This result implies the proposed approach has benefits for a large-scale traffic network simulation analysis. This method can be extended to other optimization tasks using GA in transportation studies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1673-1685
• /
• 2019

Objective: To evaluate the efficacy of treatments based on gonadotrophin-releasing hormone (GnRH), GnRH-prostaglandin $F2{\alpha}$ ($PGF2{\alpha}$), and/or intense exposure to novel rams to induce fertile estrus without the use of steroid hormones in seasonally anestrous Suffolk ewes. Methods: In the first experiment, ewes were treated with one injection of GnRH, two injections of GnRH administered 7 days apart, or a sequence of GnRH-$PGF2{\alpha}$-GnRH (GPG). In the second experiment anestrous ewes were exposed, for 36 days starting on the day of weaning, to groups of four rams of three different breeds that were alternated every day. Besides exposure to the male effect (ME), the ewes were injected with saline solution (ME group, n = 20), with GnRH (ME-GnRH group, n = 20) or with a sequence of GnRH-$PGF2{\alpha}$-GnRH (ME-GPG group, n = 20). The rams used for male-effect were fitted with aprons to prevent mating, and ewes detected in estrus were bred to selected fertile rams. Ovarian activity was monitored by progesterone determinations in both experiments. Results: In the first experiment sustained induction of ovarian activity was not achieved and no ewe was detected in estrus. In the second experiment induction of sustained ovarian activity was achieved in all groups. Most of the ewes were detected in estrus, 76.7% of the ewes were mated during a 36-d breeding period and 71.7% of all the ewes became pregnant during that period. No significant differences between groups were found for any of these variables. However, estrus detection efficiency was higher in the ME-GnRH group than in the ME group (p<0.05). Conclusion: An intense male-effect, that included the continuous presence and frequent alternation of several rams of different breeds, was sufficient to induce ovarian activity and fertile estrus in Suffolk ewes during the period of deep anestrus without the use of hormones, although addition of GnRH improved the efficiency of estrus detection.

• Journal of Life Science
• /
• v.31 no.11
• /
• pp.1046-1055
• /
• 2021

Vanillin is the primary flavor and fragrance compound of natural vanilla and is extensively used in the food, beverage, perfumery, pharmaceutical industries, and other applications. Vanillin can be produced by chemical synthesis, extraction from vanilla plants, microbial bioconversion of natural precursors to vanillin, and direct fermentation using glucose. Currently, most commercially available vanillin is produced by extraction from cured vanilla pods and by chemical synthesis using guaiacol and glyoxylic acid as starting raw materials. Due to environmental issues, health complaints, preference for natural sources, and the limited supply and soaring price of natural vanilla, biotechnology-based vanillin production is regarded as a promising alternative. As many microorganisms that are able to metabolize several natural precursors, including ferulic acid, eugenol, isoeugenol, and lignin, and accumulate vanillin, have been screened and evaluated, myriad strategies and efforts have been employed for the development of commercially viable production technology. This review outlines the recent advances in the biotechnological production of natural vanillin with the use of these natural precursors. Moreover, it highlights the recent engineering approaches for the production of natural vanillin from renewable carbon sources based on the de novo biosynthetic pathway of vanillin from glucose, together with appropriate solution strategies to overcome the challenges posed to increase production titers.

• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.33-39
• /
• 2023

Nano-sized materials can be coated on various substrates, and since this material is transparent and conductive, it can be used as a transparent electrode for electronic devices or an electrode for power supply. In this study, CNT and Ag nanowires were repeatedly coated using the silk screen technique, and samples formed up to 5 times were fabricated, and their optical and electrical properties were measured and analyzed. It was confirmed that marks were formed on the surface of the silkscreen-coated sample according to the coating direction, and the trend of transmittance and surface resistance according to the number of times of coating was investigated. As the number of coatings increased, transmittance and surface resistance tended to decrease. In particular, in the case of transmittance, the range of change was large in the samples coated 2 and 5 times. These changes were confirmed by the Ag nanowire coating. In addition, starting from 700 nm, the previous wavelength region increased according to the wavelength, while the above showed a tendency to decrease. The surface resistance was lowered from 9Ω/cm² when coating once to 0.856Ω/cm² when coating five times. It was found that the resistance value was affected by Ag similarly to the permeability. In the future, it is necessary to realize a desired transparent electrode through Ag concentration and coating of Ag nanowires with other methods and fusion with highly transparent CNT to apply to electronic devices.