• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.341-342
• /
• 2017

본 논문에서는 초저온 냉동고용 단상유도전동기의 기동전류저감을 위한 알고리즘을 제안한다. 단상유도전동기의 경우, 스스로 기동이 불가능하므로 다양한 기동방식을 채택하고 있다. 본 논문에서는 커패시터 기동-운전 방식을 사용하고 있으며, 이 경우 기동 시 정격전류의 수배에 해당되는 돌입전류가 발생한다. 이로 인해 커패시터 및 기동 보조장치의 운전성능 및 수명 감소에 직접적인 영향을 미친다. 따라서 본문에서는 기존 운전방식의 변경 없이 단상 인버터를 적용하여 기동전류를 저감하고 운전모드를 전환하는 알고리즘을 제안하고자 한다. 제안한 알고리즘의 효용성은 다양한 실험을 통해서 검증한다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.335-336
• /
• 2017

본 논문에서는 대용량 배터리 모듈이 병렬 연결되어 있는 에너지 저장장치 시스템의 초기 기동 조건시 투입 초기의 전류를 추정할 수 있는 방법을 제시한다. 제안된 방법은 배터리 모듈을 구성하고 있는 리튬 배터리 모듈의 단자 전압 및 배터리 모듈 저항 데이터를 이용하여 병렬 연결하고자 하는 배터리의 전류를 예측하는 방법으로써 배터리 모듈의 기동 투입 가능여부 등 온 오프 시퀀스 로직에 적용할 수 있다.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.3
• /
• pp.42-47
• /
• 2000

To be successful in foodservice management, you need to have an aptitude for the business. And most of all, service-oriented mind and understanding customers current and future needs are essential. In starting business with a small capital, you need to check on feasibility and profitability of the business item you chose in the first place. Also, other important factors are: How much you'll invest for the business; main target group in the locality and their income level; who are responsible for main menu, sub-menu and final taste. Generally speaking, differentiated menu and unique interior are one of the basic management strategies. The key to success in foodservice management is your unique service for customers .

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.582-593
• /
• 2002

Metal materials have been used in the clothing design on the spirit of ingenious experiment by fashion designers, and they have been put to practical use by several designers who work out a scheme of popular fashion merchandise. This current starting from the 1960s was weakened in the 1980s, but it was appeared with various shapes of metal materials in the 1990s due to a popularity of techno/cyber fashion. Recently, textile engineering technology causes to develop new-materials which are practical and sanitary. The development of fashionable metal materials brings about the popularization of fashion with metal materials, and it induces that mainstream of modem fashion has been changed into designers of pursuing the spirit of ingenious experiment. This study examines the formative characteristics of metal materials that are based on the spirit of ingenious experiment. As a result, it is evaluated that the formative of metal materials shown in modern fashion is futurism, visual concentration, avast-garde, resistance, precious.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.114-121
• /
• 2013

High efficiency operation is required for motors of vehicle to increase fuel efficiency due to the regulation of exhaust gas. This paper presents a control method of fuel pressure to increase fuel efficiency and a sensorless control method of BLDC motor to get higher efficiency than conventional brushed DC motor. Initial rotor position of BLDC motor is detected from current value that is occurred by test voltage pulse and rotor is accelerated by defined sequence to enter sensorless operation mode. The algorithm to control flow rate of fuel pump uses PI controller that is control motor speed to maintain the target fuel pressure commanded by ECU.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1999.11c
• /
• pp.557-575
• /
• 1999

The task evaluating science and technology is becoming more important in every country trying to develop and improve overall national R&D capability in an effort to sustain national prosperity and public welfare. However, the way in which evaluation organisation is approached in each country may differ from nation to nation reflecting national R&D systems and S&T policies as well as the specific roles of scientists and policy- makers at various levels. Over the past two decades or so, Korean evaluation system has been transplanted form the West and they modified, In addition, Korea borrowed elements from the Japanese. Whether such systems have been well rooted in our specific circumstances is a critical question. In this context, it would be meaningful to diagnoses the current Korean evaluation system and also makes some suggestions for improving this system. For this purpose, this paper also attempts to approach to the theoretical aspects of evaluation as a starting-point.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 2012

The current study presents a zero-one integer programming approach to determine the minimum break point set for the coordination of directional relays. First, the network is reduced if there are any parallel lines or three-end nodes. Second, all the directed loops are enumerated to reduce the iteration. Finally, the problem is formulated as a set-covering problem, and the break point set is determined using the zero-one integer programming technique. Arbitrary starting relay locations and the arbitrary consideration of relay sequence to set and coordinate relays result in navigating the loops many times and futile attempts to achieve system-wide relay coordination. These algorithms are compared with the existing methods, and the results are presented. The problem is formulated as a setcovering problem solved by the zero-one integer programming approach using LINGO 12, an optimization modeling software.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.4
• /
• pp.448-458
• /
• 1999

This paper proposes sequential control charts with an upper bound on sample size. Existing sequential control charts have no restriction on the number of observations at a sampling point. For situations where sampling and testing an item is time-consuming or expensive, sequential control charts may not be directly applied. When the number of observations in a sampling point reaches the upper bound and there is no out-of-control signal, the proposed cumulative sequential control chart defers the decision to the next sampling point of which starting value is the value of the current statistic. Two Markov chains, inner and outer chains, are used to derive the formulas for evaluating the performance of the proposed chart. It is compared with $\bar{X}$ and cumulative sum control charts with fixed and variable sample sizes. The fast initial response (FIR) feature is studied. Guidelines for the design of the proposed charts are also given.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.277-280
• /
• 2008

Starting from 2005, as the new city paradigm, the term 'u-City' was created in Korea. U-City service, as defined in "u-City law", is a service that connects and intermediates among government, traffic, welfare, environment, disaster mitigation, etc., and their data based on ubiquitous city technology and infrastructure. According to the survey executed by local governments, the improvements in the standard of living of citizens have in turn increased the needs for anti-mitigation services. Such trend is bolstered with the recent disasters such as the conflagration of Korean Soong-rae Gate and the devastating earthquake of Sichuan province. This article describes a concept of the u-City disaster prevention service and looks into the activities and planning of u-City disaster prevention service of local governments. This paper also briefly looks into the law and policies to derive the needs of u-City disaster prevention service as well as the current technologies and u-City disaster prevention services of local governments. Ultimately, this paper offers the strategic direction of developing u-Disaster Prevention City.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.287-287
• /
• 2007

The ferroelectric and electric properties of UV-irradiated bismuth lanthanum titanate (BLT) films prepared using photosensitive starting precursors were characterized. The effects of lanthanum doping on ferroelectric and electric properties were investigated by polarization-electric field hysteresis loops and leakage current-voltage measurements. X-ray diffractometer and ellipsometry were served to provide the information about the crystalline structure and thickness of the films after annealing. The images of the surface microstructure and direct-patterned BLT films were observed by using scanning electron microscopy. The effects of lanthanum doping on the electric properties of direct-pattern able BLT films and their direct-patterning were studied.