• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.103-104
• /
• 2011

This paper suggests a new starting and stopping method appropriate for the sensorless PMSM drive with air bearings. The proposed method based on the sensorless control algorithm of PMSM uses additional d-axis current control to cope with the limitation of the adopted back-emf based sensorless algorithm in the low speed region. The experimental results show that the proposed method drives appropriately the PMSM with air bearings.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1858-1864
• /
• 2011

This paper suggests a control technique of the sensorless brushless DC (BLDC) motor drive for a vehicle fuel pump application. The sensorless technique based on a comparator and a potential start-up method with high starting torque are proposed. The comparator is used to generate the commutation signals in phase with the three-phase back-EMFs. The rotor position is aligned at standstill for maximum starting torque without an additional sensor and any information of motor parameters. Also, the stator current can be easily adjusted by modulating the pulse width of the switching devices during alignment. Some experiments are implemented on a single chip 16-bit DSP controller to demonstrate the feasibility of the sensorless techniques.

• Journal of Technology Innovation
• /
• v.15 no.1
• /
• pp.65-86
• /
• 2007

The purpose of the current study is to suggest a reliable starting point for roadmapping to overcome two common shortcomings of previous literatures that they do not demonstrate a robust methodology for roadmap and they describe the roadmapping process in the abstract. The proposed methodology for roadmapping considers four important business- and market-related factors: consumer requirements, engineering characteristics, the gap between the roadmapped technology and competing technologies, and future changes in consumer preferences. We capture consumer preferences using conjoint analysis and interconnect the above four factors using QFD (Quality Function Deployment). The model is applied to power line communications (PLC). The results show that there is a significant difference between priorities assigned to the engineering characteristics by expert alone and priorities determined by the roadmapping model.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.831-833
• /
• 2001

Line-start motor has ability to start itself without using other methods, so, it is important to predict starting performance accurately. In this paper, the starting characteristics of single-phase capacitor-start, capacitor-run line-start motor was calculated by combination of d-q axis voltage equations and mechanical dynamic equations. D-q axis inductances of this machine varied with current phase angle and amplitude are considered. The validity of analysis method verified by comparing to test results.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.76-78
• /
• 2000

The previous MCC's have the demerits of high cost and much manhour for rework because they are impossible for the standardization of products and have many manual connections. The customers require the products which can operate in connection with SCADA system by digitalizing the functions of the current MCC's and are systematized with capability of remote control. To solve these disadvantages and requirements, we developed the Electronic Motor Control System according to starting type for applying to fields based on this. This system has the various functions such as protection, measurement, and communication. Using these functions, it can monitor motor status through communication with the upper system and define the circuit for lower connection cost according to starting type and shorter manufacture period by program. The development of this product results in establishment of competitive structure with domestic competition and perfect automatic monitoring through linkage with SCADA system. In addition, it provides the comparable dominancy of receiving on orders in switch gear and adaptability to change of MCC market in Japan and Europe.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.27.1-27.1
• /
• 2017

There is a rich diversity of galaxy properties and we are starting to understand some of the drivers for differences between galaxies. Much progress has been has been made in the last decade, thanks in large part to massively multiplexed surveys using single fibres, but we still lack a complete picture of how galaxies are built. I will discuss how large-scale integral field surveys can address a number of the outstanding questions in the field, starting with the current SAMI Galaxy Survey, and then looking towards the Hector instrument that will carry out integral field surveys of order 50,000-100,000 galaxies. With SAMI we can start to address how mass and environment influence galaxy structure and history, and I will discuss examples such as the environmental quenching of star formation and the distribution of angular momentum. With larger samples afforded by Hector we can go beyond simply mass and environment, to separate galaxies based on their merger or accretion history, as well as their larger-scale environment.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.655-656
• /
• 2015

In this paper, diagnosis for 85 high voltage induction motors which have operated for more than 20 years in 18 wide area water supply offices were applied and the results of diagnosis were analysed. Furthermore, main factors that would be affecting rotor defects were selected and correlations between dependent variables which was magnitude for sideband frequency on current during operation and independent variables such as starting characteristic, operating time, number of operation, load factor, maker, rotation speed, capacity were analysed. It was clear that factors including starting characteristic, number of operation, maker, rotation speed caused break by correlation analysis. From this, regression equation was deduced through regression analysis. Based on suggested regression equation, it is applied usefully that we can estimate the condition of rotor without onsite diagnosis and plan the schedule of diagnosis.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.205-208
• /
• 2002

The single phase induction motor(SPIM) with two windings, main and auxiliary winding, is widely used due to ruggedness, low maintenance and simplicity of construction. There are several ways of starting single phase induction motor. The most common method is to use centrifugal switch that is connected in series with a capacitor. But the centrifugal switch that is the external starting system has many problems. In this paper, we use triac to overcome defects that happen by centrifugal switch, Also we used inductor that connected with main winding to get a gate trigger voltage signal. Experiments are focused on a capacitor starling single phase induction motor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.450-454
• /
• 2003

This paper proposes a new driving scheme for single-phase SRM. The driving scheme is very simple and inexpensive. By use of this scheme, simple power devices based on low switching losses enable to high efficiency SRM drive. Starting, One of the main problem in single-phase SRM is overcame by a new starting algorithm with one hall sensor and a parting magnet. The proposed single phase SRM has a high efficiency and robust drive characteristics compared to that of a universal motor.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.146-155
• /
• 2009

The static frequency converter (SFC) systems are used as a method of driving large synchronous machines in many power and industrial plants. In this paper, new control algorithms of SFC systems for starting gas turbo sets are proposed for a four quadrant operation: start-up at standstill; an acceleration up to the speed of the rated voltage; field weakening to reach the rated speed; synchronization to the main alternating current (AC) source; and dynamic braking to stop safely within the rating of the synchronous machine. Experimental results show that the proposed algorithms are proper and effective.