• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.585-590
• /
• 2005

The effects of spark timing and exhaust valve timing change on exhaust gas temperature during cold start period of an SI engine are studied through engine bench tests. The exhaust gas temperature increases when the spark timing or valve timing are retarded individually, due to late combustion or slow flame speed. Therefore, exhaust gas temperature shows a large increase when the two timings are retarded simultaneously. However, it is considered that combustion stability during cold start deteriorated under these retarded conditions. To increase exhaust gas temperature for fast warmup of catalysts while maintaining combustion stability, an optimal condition for spark and valve timing retard should be applied for the cold start period.

• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.47-52
• /
• 2009

The effect of forging start temperature, forging ratio on the microstructure and mechanical properties of B7B4 steel ware investigated. Microstructure of centrifugal casted B7B4 steel consisted of martensite and ferrite phase. The volume fraction of ferrite increased with increase of forging start temperature and decreased with increase of forging ratio. Tensile strength and hardness decreased with higher of forging start temperature, while impact value and elongation increased with higher of forging start temperature. With increase of forging ratio, tensile strength rapidly increased up to the forging ratio of 30%, and then slowly increased, but elongation was decreased. Hardness and impact value rapidly increased with increase of forging ratio.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.17-20
• /
• 2008

Cold start of a fuel cell system is a major obstacle should be overcome as to commercialize it, especially for passenger vehicle applications. However, the cold start characteristics is so complicated since it involves various phenomenon such as ice-blocking in GDL, ionic conductivity in membrane affected by water activity with phase change, heat transfer through components such as bipolarplates or endplates, electro-chemical reactions affected by circumferential temperature and humidity as well. Axiomatic design provides a systematic method to investigate the complex phenomenon although it was developed as a methodology to establish logical design procedure by Nam P. Suh in 1990s. This paper presents a framework to approach the complex cold start problem using Axiomatic Design which features simplifying a problem through hierarchical decomposition and decoupling from the view of functional requirements and design parameters.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.223-230
• /
• 2011

According to EMEP/EEA Emission Inventory Guidebook, the emissions produced by vehicle in cold start phase should be calculated differently compared to hot start phase. In this study, considering this driving cycle, more appropriate procedures for estimating Environmental Benefits was suggested. Using Tier 3 standard, all links within the impact area were included in estimating emissions. Traffic volume and travel distance were analyzed using EMME/3 software. For application of the procedures in this study, the case study was carried out with real transportation project. As a result, the Environment-Benefits increased by 30%. If the methodology suggested in this study is applied to feasibility study it will help to activate the investment of the environment-friendly modes like railway in the future.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.169-179
• /
• 2005

In the 500m short track speed skating, the matter of who reaches the first corner first can important factor since each competitor races with all speed from the start to the first line. A filed study was attempted to kinematical estimation six female foreign skaters, who participated in the 500m female final round competition, and two Korea skates during the World Short track Skating Championship. The three dimensional motion analysis with DLT method was executed using four video cameras for analyzing the actual competition situation. In point of analyzing the actual competition situation, it is expected that skaters and coaches the effective informations, and the following conclusions are drawn; The elapsed time by phase in start motion of the foreign skaters appeared shorter those of Korea skaters, so the start training of Korea skaters should be strengthed. Also the displacement of C.G in the foreign skaters appeared shorter displacement than those of Korea skaters. Especially in the starting position, the foreign skaters are superior to Korea skaters in displacement of first(left) and next following stroke(right). The velocity of C.G and maximum velocity of skate blade of foreign skaters art faster than those of Korea skaters. And the foreign skaters show the superior early velocity change. Both of leaning body angle, and left and knee angle of the foreign skaters lead to positive point of having the propulsive force in the early starting position. Observing in the most prominent feature of foreign and Korea skaters in start phase, foreign skaters skate quickly the third stroke. These features of Korea skaters would appear disadvantage of location selection in entering the coner course.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.144-146
• /
• 2001

This paper deals with analysis method of single-phase line-start permanent magnet motors. Unbalanced magnetic fields produced by single-phase input make analysis difficult. To solve this unbalanced magnetic fields, this paper proposed symmetrical components transformations as well as d-q axis ones. Parameters in d-q voltage equations were calculated by Finite Element Analysis.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3826-3834
• /
• 2024

The main purposes of start-up tests in nuclear power plants (NPPs) are to ensure safe and reliable operation, verify system functionality, comply with regulatory requirements, optimize performance, and establish a foundation for ongoing plant operation and maintenance. However, the start-up tests of NPPs also could be used as a main part of the nuclear code validation procedure for several reasons including: realistic simulation, comprehensive evaluation, detection of code limitations, validation of safety margins and confidence in code predictions. The main purpose of the current study is to define and assess the validation procedure based on actual start-up test data. In this regard, the developed RELAP5 model has been validated against the actual data of VVER-1000 plant during a dynamic start-up test. The results of this full-scale validation show a good agreement between the developed RELAP5 model results and actual plant data. Finally, by defining a step by step validation procedure, it has been recommended to use the start-up phase test data as a more robust validation process which allow for full-scale validation of the nuclear code by comparing its predictions with actual plant measurements and also other advantages which have been demonstrated in the current study.

• Journal of Mechanical Science and Technology
• /
• v.16 no.7
• /
• pp.999-1008
• /
• 2002

The spray structures and distribution characteristics of liquid and vapor phases in non-evaporating and evaporating Gasoline Direct Injection (GDI) fuel sprays were investigated using Laser Induced Exciplex Fluorescence (LIEF) technique. Dopants were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to study internal structure of the spray, droplet size and velocity under non-evaporating condition were measured by Phase Doppler Anemometry (PDA). Liquid and vapor phases were visualized at different moments after the start of injection. Experimental results showed that the spray could be divided into two regions by the fluorescence intensity of liquid phase: cone and mixing regions. Moreover, vortex flow of vapor phase was found in the mixing region. About 5㎛ diameter droplets were mostly distributed in the vortex flow region. Higher concentration of vapor phase due to vaporization of these droplets was distributed in this region. Particularly, higher concentration of vapor phase and lower one were balanced within the measurement area at 2ms after the start of injection.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.5
• /
• pp.238-245
• /
• 2001

During an AC motor's start-up accelerating period, a large amount of current is required to reach to the rating speed. This is called in-rush current. This peak in-rush current can be more than about several times the operating or steady-state current in the full load rating of the motor. In-rush current is present in both and electronic ballasts. The main area of concern is the tripping of circuit breaker and fuses which can affect electrical system components From this, we can see that the electrical power controllers will be rather concerned, since they have to supply the actual current necessary to start the motor. This paper presents a new method to reducing in-rush current and energy saving of the single-phase induction motor used in air-conditioner. It can be obtained that proposed system is low cost and small size as compared with other controller. Experiments are focused on a capacitor starting single-phase induction motor. The optimal power saving and in-rush current limiting by phase angle control are verified by experimental results. Also, auxiliary winding was controlled by electronic starting switch.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1218-1230
• /
• 2019

A sub-channel solver, named ${\underline{S}}teady$ and ${\underline{T}}ransient$ ${\underline{A}}nalyzer$ for ${\underline{R}}eactor$ ${\underline{T}}hermal$ hydraulics (START), has been developed using the homogenous model for two-phase conditions of light water reactors. The code is developed as a fast and accurate TH-solver for coupled and multi-physics calculations. START has been validated against the NUPEC PWR Sub-channel and Bundle Test (PSBT) database. Tests like single-channel quality and void-fraction for steady state, outlet fluid temperature for steady state, rod-bundle quality and void-fraction for both steady state and transient conditions have been analyzed and compared with experimental values. Results reveal a good accuracy of solution for both steady state and transient scenarios. Axially different values for turbulent mixing coefficient are used based on different grid-spacer types. This provides better results as compared to using a single value of turbulent mixing coefficient. Code-to-code evaluation of PSBT results by the START code compares well with other industrial codes. The START code has been parallelized with the OpenMP algorithm and its numerical performance is evaluated with a large whole PWR core. Scaling study of START shows a good parallel performance.