• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.17-25
• /
• 2020

Objective: The purpose of this study is to provide a better understanding of long turn mechanism by describing long turns after kinematic analysis and provide skiers and winter sports instructors with data through which they are able to analyze right postures for turns in skiing in a systematic, rational and scientific manner. Method: For this, a mean difference of kinematic variables (the center of gravity (CG) displacement of distance, trajectory, velocity, angle) was verified against a total of 12 skiers (skilled and unskilled, 6 persons each), regarding motions from the up-start to down-end points for long turns. Results: First, concerning the horizontal displacement of CG during a turn in skiing, skilled skiers were positioned on the right side at the upstart and edge-change points at a long turn. There was no difference in anteroposterior and vertical displacements. Second, in terms of CG-trajectory differences, skilled skiers revealed a significant difference during a long turn. Third, regarding skiing velocity, skilled skiers were fast at the edge-change and maximum inclination points in long turns. Fourth, there was no difference in a hip joint in terms of a lower limb joint angle. In a knee joint, a large angle was found at the up-start point among skilled skiers when they made a long turn. Conclusion: In overall, when skilled and unskilled skiers were compared, to make a good turn, it is required to turn according to the radius of turn by reducing weight, concerning the CG displacement. Regarding the CG-trajectory differences, the edge angle should be adjusted via proper inclination angulation. In addition, a skier should be more leaned toward the inside of a turn when they make a long turn. In terms of skiing velocity, it is needed to reduce friction on snow through the edging and pivoting of the radius or turn according to curvature and controlling ski pressure. Regarding a lower limb joint angle, it is important to make an up move by increasing ankle and knee angles instead of keeping the upper body straight during an up motion.

• The Korean Journal of Franchise Management
• /
• v.11 no.3
• /
• pp.27-41
• /
• 2020

Purpose: This study was conducted for purpose to derive a model of the founding competency of undergraduate students preparing for job creation. We want to support undergraduate students who are preparing to start a job creation so that they can successfully start a job creation. In Korea, research on entrepreneurship competency has been actively conducted for a variety of subjects including undergraduate students, but research on job creation competency is insufficient. To this end, we intend to contribute to the success of undergraduate students preparing for job creation by deriving a job competency model. Research design, data, and methodology: In order to derive job creation competency, interviews were conducted with best practices in the job creation activity process, and the job creation competency was derived using Spencer and Spencer's competency model development process and competency dictionary. Result: The derived competencies were further supplemented through the verification of job creation experts and HRD experts, and a total of 3 competency groups, 13 competences, and 44 specific actions were derived. The derived job creation competency model is significant in that it is an initial study that attempts to develop job creation competency, that it can be a reference point for developing curriculum for undergraduate students preparing for job creation, and that they have developed a competency model in the new field of job creation. However, despite this significance, there are some limitations. First, the derived competency model did not perform validity verification using quantitative research. Second, the difference analysis between the excellent group and the average group was not conducted. Third, the level of behaviors could not be staged. Lastly, it was not possible to compare it with the competency of franchisor and job creation for undergraduate student competency. Therefore, it is necessary to upgrade the job creation competency model by conducting follow-up studies. The following is suggested as a follow-up study. First, verification of the validity of job creation competency, and second, a comparative study of excellent cases and average group. Third, a study on the level of action level of job creation competency. Lastly, it is a comparative study of job creation competency and the competency of franchise affiliates.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.2
• /
• pp.17-24
• /
• 2015

Purpose: This study examines distance from nurse station to bed according to composition of single bedroom. Methods: This study has two groups of target sample ward planes. The first group has diverse patients bedroom. The other group is 36 single bedrooms and 2 3-bedrooms. The guideline of distance measurement was instituted for consistency. This study has 3 main concepts of the guideline. 1) The distance is shortcut from NS to bed. 2) The traffic line is center line between walls and center of door. 3) The start point is center of NS and the end point is bed. Results: The result of this study can be summarized into two points. The first one is that single bedroom has good privacy and longer distance from NS to bed. The second one is that weak point of single bedroom was asked ward operating system and architectural planning like as patients room, bed per unit, location of NS and plan type. Implications: Consideration Should be taken into account for the effective bedroom composition and allocation in ward. This Stuy hopefully serve as a stepping stone for the standard design of space program in ward planning.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.99-110
• /
• 2010

An event means a flow which has a time attribute such as a symptom of patient. Stream data collected by sensors can be summarized as an interval event which has a time interval between the start-time point and the end-time point in multiple stream data environment. Most of temporal mining techniques have considered only the frequent events. However, these approaches may ignore the infrequent event even if it is important. In this paper, we propose a new temporal data mining that can find association rules for the significant temporal relation based on interval events in multidimensional stream data environment. Our method considers the weight of events and stream data on the sensing time point of abnormal events. And we can discover association rules on the significant temporal relation regardless of the occurrence frequency of events. The experimental analysis has shown that our method provide more useful knowledge than other conventional methods.

• The KIPS Transactions:PartD
• /
• v.18D no.4
• /
• pp.215-224
• /
• 2011

U-Health collects patient information with various kinds of sensor. Stream data can be summarized as an interval event which has aninterval between start-time-point and end-time-point. Most of temporal mining techniques consider only the event occurrence-time-point and ignore stream data change of state. In this paper, we propose the temporal mining technique considering the event change of state in U-Health. Our method overcomes the restrictions of the environment by sending a significant event in U-Health from sensors to a server. We define four event states of stream data and perform the temporal data mining considered the event change of state. Finally, we can remove an ambiguity of discovered rules by describing cause-and-effect relations among events in temporal relation sequences.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.2
• /
• pp.139-147
• /
• 2013

This study analyzed agricultural water distribution systems for the utilization of water demand-oriented water supply systems. Three major TM/TC(telemeter/telecontrol) districts of agricultural water management were selected for analyzing the characteristics of the water distribution systems. In addition, the characteristics of the water supply systems for general water supply zones based on irrigation facilities were also investigated, along with the case of special water management during the drought season. As a result, high annual and monthly variations were observed for the water supply facilities, including the reservoirs and pumping stations. In particular, these variations were more obvious during the drought season, depending on the type of facility. The operations of the pumping stations and weirs were more sensitive to the stream levels than the reservoirs, and the smaller reservoirs were influenced more than the larger reservoirs. Therefore, a water-demand-oriented water supply system should consider the existing general practices of water management in the agricultural sector, and focus on achieving a laborsaving system rather than water conservation in the case of reservoirs. Equal water distribution from the start to the end point of irrigation channels could be an effective solution for managing pumping stations.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.58-63
• /
• 2005

As fuel cells approach commercialization, hydrogen production becomes a critical step in the overall energy conversion pathway. Reforming is a process that produces a hydrogen-rich gas from hydrocarbon fuels. Hydrogen production via autothermal reforming (ATR) is particularly attractive for applications that demand a quick start-up and response time in a compact size. However, further research is required to optimize the performance of autothermal reformers and accurate models of reactor performance must be developed and validated. The design includes the requirement of accommodating a wide range of experimental set ups. Factors considered in the design of the reformer are capability to use multiple fuels, ability to vary stoichiometry, precise temperature and pressure control, implementation of enhancement methods, capability to implement variable catalyst positions and catalyst arrangement, ability to monitor and change reactant mixing, and proper implementation of data acquisition. A model of the system was first developed in order to calculate flowrates, heating, space velocity, and other important parameters needed to select the hardware that comprises the reformer. Predicted performance will be compared to actual data once the reformer construction is completed. This comparison will quantify the accuracy of the model and should point to areas where further model development is required. The end result will be a research tool that allows engineers to optimize hydrogen production via autothermal reformation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.118-122
• /
• 2000

Recently, High accuracy and precision are required in various industrial field especially, semiconductor manufacturing apparatus, Ultra precision positioning apparatus, Information field and so on. Positioning technology is a very important one among them. For composition of this technology, the development of system with high speed and high resolution is needed. At start point and end position vibration must be repressed on this system for composition of position control. This vibration is arisen nose, is increased setting time, is reduced accuracy. Especially, repressed for the lead with high speed. The small actuator with high speed and high resolution is need to repression against this residual vibration. This actuator is, for example, piezo actuator, piezoelectric material that converting from electronic signal to mechanical force is adequate material, beacause of control of control to position and force. In this study, piezo electric material is used to actuator, ultra precision positioning apparatus with stage of hinge structure is designed, simulation is performed, control performance is tested by producing apparatus. For easy usage and stability in industrial field, we perform to simulation and to position control test by digital PID controller.

• Advances in Energy Research
• /
• v.4 no.1
• /
• pp.87-106
• /
• 2016

In this research, optimum design of the combined solar collector, geothermal heat pump and thermal seasonal storage system for heating and cooling a sample greenhouse is studied. In order to optimize the system from technical point of view some new control strategies and functions resulting from important TRNSYS output diagrams are presented. Temperatures of ground, rock bed storage, outlet ground heat exchanger fluid and entering fluid to the evaporator specify our strategies. Optimal heat storage is done with maximum efficiency and minimum loss. Mean seasonal heating and cooling COPs of 4.92 and 7.14 are achieved in series mode as there is no need to start the heat pump sometimes. Furthermore, optimal parallel operation of the storage and the heat pump is studied by applying the same control strategies. Although the aforementioned system has higher mean seasonal heating and cooling COPs (4.96 and 7.18 respectively) and lower initial cost, it requires higher amounts of auxiliary energy either. Soil temperature around ground heat exchanger will also increase up to $1.5^{\circ}C$ after 2 years of operation as a result of seasonal storage. At the end, the optimum combined system is chosen by trade-off between technical and economic issues.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.330-338
• /
• 2002

A speech recognition chip that can recognize a small vocabulary as a word-level has been designed. It is composed of EPD(Start and End-point detection) block, LPC block, DTW block and external memory interface block. It is made of 126,938 gates on 4x4mm2 area with a CMOS 0.35um TLM process. The speed of the chip varies from 5MHz to 60MHz because of its specific hardware designed for the purpose. It can compare 100,000 voices as a small vocabulary which has approximately 50∼60 frames at the clock of 5MHz and also up to 1,200,000 voices at the clock of 60MHz.