• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.206-211
• /
• 2020

Background: The longitudinal arch is important for individuals with pes planus. The toe spread out exercise (TSO) has been widely used to continuously support the longitudinal arch by increasing the abductor hallucis (AbdH) muscle activation. However, the AbdH muscle is commonly lack of the sufficient activation during the TSO especially in individuals with pes planus. Objects: This study was performed to investigate the effect of arch support on the muscle activity and strength of the AbdH during TSO in standing position in individuals with pes planus. Methods: Twenty subjects with pes planus between 20 and 30 years of age participated in this study. The muscle activity and strength of the AbdH were measured using surface EMG system and the Smart KEMA tensiometer system. The AbdH muscle was evaluated during TSO between individuals with and without longitudinal arch support in standing position. The longitudinal arch was supported by using the insole. The paired t-test was used. The level of statistical significance was set at α = 0.05. Results: The muscle activity and strength of the AbdH during TSO with arch support in standing position was significantly greater than that without arch support. Conclusion: The muscle activity and strength of the AbdH during TSO in standing position can be influenced by the longitudinal arch support in individuals with pes planus. The AbdH strengthening during TSO in standing with arch support can be recommended especially in individuals with pes planus in the clinical settings.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.325-332
• /
• 2006

The dynamic responses of human standing postural control were investigated when subjects were exposed to long-term horizontal vibration. It was hypothesized that the motion of standing posture complexity mainly occurs in the mid-sagittal plane. The motor-driven support platform was designed as a source of vibration. The AC Servo-controlled motors produced anterior/posterior (AP) motion. The platform acceleration and the trunk angular velocity were used as the input and the output of the system, respectively. A method was proposed to identify the complexity of the standing posture dynamics. That is, during AP platform motion, the subject's knee, hip and neck were tightly constrained by fixing assembly, so the lower extremity, trunk and head of the subject's body were individually immovable. Through this method, it was assumed that the ankle joint rotation mainly contributed to maintaining their body balance. Four subjects took part in this study. During the experiment, the random vibration was generated at a magnitude of $0.44m/s^2$, and the duration of each trial was 40 seconds. Measured data were estimated by the coherence function and the frequency response function for analyzing the dynamic behavior of standing control over a frequency range from 0.2 to 3 Hz. Significant coherence values were found above 0.5 Hz. The estimation of frequency response function revealed the dominant resonance frequencies between 0.60 Hz and 0.68 Hz. On the basis of our results illustrated here, the linear model of standing postural control was further concluded.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.391-397
• /
• 2014

The purpose of this work is to biomechanically study the effect of the one leg standing pose in yoga.. The work have been done through the evaluation for the left and right symmetry ability of one leg standing pose in the before and after yoga training for the 14 female yoga subject group (height: $164.3{\pm}4.4cm$, mass: $53.4{\pm}6.4kg$, year: $20.0{\pm}0.49yrs$) participated in this experiment. The motions of one leg standing pose were captured with Vicon system and the parameters were calculated with Visual-3D and Ground reaction force system. The results were as followed; - Front and backward COPsd did not show the significant difference, compared the before training with the after. - Left and right COPsd showed the significant difference (p<0.05), compared the before training with the after. - COP distance showed the significant difference (p<0.01), compared the before training with the after. - The asymmetry index of front and backward COPsd did not show the significant difference, compared the before training with the after. - The asymmetry index of left and right COPsd did not show the significant difference, compared the before training with the after. - The asymmetry index of COP distance showed the significant difference (p<0.01), compared the before training with the after. Therefore, the yoga training demonstrated the stable improvement in the one leg standing pose of inferior feet and the positive effect to the left and right symmetry ability.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.226-232
• /
• 2015

The aging of Korea is rapidly advancing in an unprecedented rate in the world. Indoor and outdoor safety accidents involving the elderly frequently occur, with elderly population increasing. Because the physical strength of elderly is decreased, it is necessary to develop devices that aid the everyday life of the elderly to prevent safety accidents. Among many activities, the motions of standing from and sitting on a chair require much physical strength from particular body parts, which causes an overload for particular body parts. To the elderly the repeating motion of standing from and sitting down on a chair is burdensome, because they do not have enough physical strength compare to young persons. As a result the elderly could be injured or falling during standing or sitting. Therefore, the development of a lift chair that considers the problems mentioned above is necessary to prevent the safety accidents of the elderly. The study designed a non-motorized lift chair that comfortably aids the standing and sitting down motion for the use of the elderly by reflecting the anthropometric data of the Korean elderly over 65 years old. Also the design was implemented to smoothly aid the standing motion by considering the knee angle of the elderly when standing. Because the regained strength to stand from a chair is depend on the knee angle. Unlike existing lift devices, this device utilizes a tilting mechanism that does not use electric power so that the product could be composed inexpensively than existing chairs released in the market.

• PNF and Movement
• /
• v.16 no.3
• /
• pp.405-414
• /
• 2018

Purpose: The purpose of this study was to examine test-retest reliability and criterion-related validity of a trunk stability robot when measuring the weight-bearing symmetry static sitting and standing in stroke patients. Methods: For 27 stroke patients, weight-bearing symmetry was assessed twice, 7 days apart. The intraclass correlation coefficient (ICC2,1) and minimal detectable change (MDC) were used to examine the level of agreement between test and retest. The criterion-related validity of weight -bearing symmetry was demonstrated by Spearman correlation of modified Barthel index (MBI), the sit to stand test (STS), the timed up & go Test (TUG), and the function in sitting test (FIST). Results: the test-retest agreements were excellent for the weight-bearing symmetry of static sitting (ICC2,1: 0.90) and standing (ICC2,1: 0.89). It all showed that the acceptable MDC for the weight-bearing symmetry of static sitting and standing was 0.11 and 0.16, respectively (highest possible score<20 %), indicating that the measures had a small and acceptable degree of measurement error. The weight-bearing symmetry of static sitting was significantly correlated with the TUG(r=-0.45) and FIST(r=0.46)(p<0.05); the weight-bearing symmetry of static standing was also significantly correlated with MBI (r=0.65), TUG (r=-0.67), FIST (r=0.61)(p<0.01), and STS (r=-0.47)(p<0.05). Conclusion: The weight-bearing symmetry of static sitting and standing assessed by the trunk stability robot showed highly sufficient test-retest agreement and mild-to-moderate validity. It could also be useful for clinicians and researchers to evaluate balance performance and monitor functional change in stroke patients.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.422-427
• /
• 2018

The purpose of this study is to investigate the effect of acoustic radiation force on the standing wave acoustic levitation phenomenon, which is the levitation of small objects near the pressure node of the standing wave, using the Bernoulli principle. The source and scheme of the acoustic radiation force, which is the cause of the levitation, are conceptually explained through comparison with the graph of the acoustic radiation force versus the distance from the transducer. A series of experiments supporting this explanation was performed with a BLT(Bolt-clamped Langevin Type) ultrasonic transducer to confirm that the objects are floating near the pressure nodes and that it satisfies the condition for the standing wave formation when the object is levitating. Furthermore, the vertical alignment of floating objects, which is a characteristic of standing wave acoustic levitation phenomenon, could be explained.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.1
• /
• pp.40-44
• /
• 2019

Objective: The purpose of this study was to examine the changes in postural stability according to ankle fixation in healthy university students. Design: Cross-sectional study. Methods: Thirty healthy subjects (15 males and 15 females, 20.13 years, 167.49 cm, 65.87 kg) were recruited on a voluntary basis. The BT4 system (HUR Laps Oy, Tampere, Finland) was used to measure the static (standing posture with eyes open and eyes closed) and dynamic (external perturbation and limits of stability (LOS) in the forward, backward, left, and right side) balance abilities. External perturbation was measured by the subject's postural sway velocity and area for 20 seconds after being impacted by a gym ball. Static and dynamic stabilities were measured with ankle joint fixation and non-fixation conditions. Ankle fixation was provided using Mueller tape on both ankle joints. Results: For static stability under the standing posture, there was no significant difference between standing with ankle joint fixation and non-fixation conditions. However, dynamic stability (external perturbation and LOS in the forward, backward, left, and right side) was significantly higher in the standing with the non-fixation condition compared to the standing with ankle joint fixation condition (p<0.05). Conclusions: Our results reveal that ankle joint fixation can influence dynamic stability during standing. Thus, we believe that this result provides basic information for making improvements in postural control and may be useful in balance training for fall prevention.

• The Journal of Korean Physical Therapy
• /
• v.33 no.1
• /
• pp.7-15
• /
• 2021

Purpose: This study was examined to improve the standing posture of a scoliosis client using the ICF Tool. Methods: For examination, the study subject was a 16-year-old female student diagnosed with 3curve-pelvic (3CP) type scoliosis. Information about her were collected through a client interview and based on international Classification of Functioning, Disability and Health (ICF). The ICF core set was for post-acute musculoskeletal conditions, and the ICF level 2 items suggested by National Rehabilitation Information Center (NARIC) were added to the recommendations for scoliosis. For evaluation, the ICF assessment sheet was used to identify the interaction among the problems. For the diagnosis, the client's functional problems were described in ICF terms. For the prognosis, the global goals for reaching the client's functional activity and participation level were presented as the long-and short-term goals. For the intervention, a coordinative locomotor training program composed of warm-up, main exercise, and cool-down was applied 3 times a week, 50 minutes a day, for 5 weeks. For the outcome, the differences between before and after the intervention were compared with the ICF qualifier and are shown with the ICF evaluation display. Results: Clinical advantages were observed in body function and structure (7° decrease of thoracic angle, 7 score increase of trunk muscle power, 6.47s improve of one leg standing, 4 score decrease of neck pain). The activity for maintaining the standing posture, in which the client had a primary limitation, was improved. Conclusion: Applying the coordinative locomotor training program is expected to improve scoliosis client's standing posture.

• Journal of radiological science and technology
• /
• v.46 no.5
• /
• pp.395-399
• /
• 2023

The knee arthritis patients are generally performed standing position radiography. However, patients with pain caused by degenerative diseases or injuries in the knee have difficulty maintaining a standing position. Therefore, this study aims to develop a knee joint standing weight bearing projection assist device to solve these problems when patients undergo knee radiography due to various diseases. The design of the knee joint weight-bearing radiography assist device is carried out with 3D design and drawing production to secure basic data, electric support and frame manufacture. A fixed device for maintaining the patient's knee standing weight-bearing projection, an electric digital height device, a digital protractor, and a safety device were designed. The arm support is made of PVC with a cushion to relieve the impact and make it easier to remove debris. The digital electric device can be moved up and down according to the patient's height, and a remote control is attached. The safety device is made to be adjustable in size by attaching metal hooks on both sides of the frame and to shield the scrotum. A digital protractor was attached to the side frame to set the desired knee angle. When a self-made assist device was used to perform a knee joint standing weight bearing projection, it helped maintain arm support and lower extremities position. In addition, the height could be adjusted using an assist device during standing projections, which helped the patient maintain the position.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.281-287
• /
• 2014

Objective: The objective of the study is to develop a portable assistance device to help elderly users reduce strain on the knee and leg muscle while the elderly are standing up. Background: The pose of standing up from a chair is a basic movement, but the elderly often have difficulty standing up due to their weak muscles. We focus on designing a solution that helps the elderly reduce physical problems and support them standing up. Method: This study consists of three parts. Part I explores the way to reduce the refrain of leg muscle while standing up from a chair. In the process of structural development, we found that the moment is minimized when user pushes down the armrests due to a decrease in the force acting on the center of mass. In part II, a user test of 20 participants was carried out to rank the order of comfort of two stimuli: the chair with fixed armrests and the chair with the four-link mechanism that we created-in three different ways; (1) to stand up without touching armrests, (2) to stand up by pushing down on fixed armrests, and (3) to stand up by pushing down on armrests and being supported by the mechanism. To examine the statistically significant differences among the rank means, a Friedman test was conducted. In part III, we analyze the results of the user test and interview feedbacks, focusing on establishing a design strategy from UPO and visualizing it in 1:1 scale. Results: In part I, we decided to develop the four-link mechanism. The bottom is lifted up as the link rises. In part II, based on the rank data, we empirically found that UPO was assessed as the most comfortable during the stimuli. The thigh angle is smaller and the bottom of UPO is separated from a seat. In part III, after assessing the results and feedbacks, we created a visualization strategy for UPO: light, friendly, and novel. Conclusion: The portable and non-mechanical UPO comprises a four-link system that lifts the user's hips while standing. It can help users avoid knee and leg muscle strain. Its universal design considers the elderly's difficulties. Application: In a future study, combining light and durable material in UPO is expected to increase its usability. And this study is an opportunity to design various types of standing assistance devices.