• Human Ecology Research
• /
• v.58 no.3
• /
• pp.357-374
• /
• 2020

This study suggests the use of standardized sewing terms for the construction of smart sewing systems. This study analyzed the use of stitches (ISO 4915) and seams (ISO 4916) for cut and sewn knit garment which are the basic elements of sewing on an ISO basis. The results of the analysis of sewing specifications of cut and sewn knit garments are as follows. First, the use of stitches and seams were analyzed. As a result, both stitches and seams were used as non-standard terms. Second, among 3,263 stitches, ISO 4915 No. 406 followed by 401, 504, 605 were the most frequently used; however, ISO 4915 No. 514 was anticipated the most because the ISO 4915 No. 514 used for joining was not recorded in the sewing specification. Finally, the use of stitch for each seam was analyzed. The most common stitch used for ISO 4916 No. 6.02.07 was ISO 4915 No. 406. In addition, when it was sewing ISO 4916 No. 4.04.01, ISO 4915 No. 504 was used in step 1, and ISO 4915 No. 406, 602, and 605 were used in step 2. It is important to use the international standard sewing terms for the production site based on the results. In addition, the construction of smart sewing systems and the work of international standardization through industry-university cooperation are important for securing global competitiveness. Therefore, the use of international standard terminology and practical training should be conducted with a focus on stitching and seams with high frequency of use.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.231-241
• /
• 2022

Objectives: The purpose of this study is to evaluate the input status of exposure-related information in the working environment monitoring database (WEMD) and special health examination database (SHED) for the construction of a national exposure surveillance system. Methods: The industrial and process code input status of WEMD and SHED for 21 carcinogens from 2014 to 2016 was compared. Data from workers who performed both work environment monitoring and special health examinations in 2019 and 2020 were extracted and the actual status of input of industrial and process codes was analyzed. We also investigated the cause of input errors through a focus group interview with 12 data input specialists. Results: As a result of analyzing WMED and SHED for 21 carcinogens, the five-digit industrial code matching rate was low at 53.5% and the process code matching rate was 19% or less. Among the data that simultaneously conducted work environment monitoring and special health examination in 2019 and 2020, the process code matching rate was very low at 18.1% and 5.2%, respectively. The main causes of exposure-related data input errors were the difference between the WEMD and SHED process code input systems from 2020, the number of standard process and job codes being too large, and the inefficiency of the standard code search system. Conclusions: In order to use WEMD and SHED as a national surveillance system, it is necessary to simplify the number of standard code input codes and improve the search system efficiency.

• Archives of design research
• /
• v.13 no.4
• /
• pp.225-231
• /
• 2000

Forcasting the future is a very important task in design situation analysis. To do this, the reduction of life style, the tendency of product differentiation and individuality should be considered along with such changes as cultural, economical and social trends. At the moment, industrial structure is being reorganized from centering around the manufacturing industry to the distribution industry and consumers. Consumers show the attitude of expressing their individualities on the basis of various tastes rather than standardization. The flow of information also has been changing rapidly from the former types of information provided by producers to the age when consumers pursue the objective and model of information. Therefore, we are able to say that picking up the trends around the streets becomes more important than ever. Accordingly, the objective of this study is to establish a system which is able to effectively carry out the trend analysis by a town watching method, the construction of a database with collected data, and its practical application on the web.

• The Journal of the Korea Contents Association
• /
• v.7 no.7
• /
• pp.104-113
• /
• 2007

The purpose of this study is to develop contents and management strategies of Social Welfare Education e-Learning. For this study, Data were collected from students who were attended to Introduction to Social Welfare e-Learning in K center between first semester, 2006 and first semester, 2007 as well as professors and system operator. It is important meaning to performance as the first empirical study which is on the e-Learning of social welfare studies. As a results, it has been proved that systematic preparation process, study contents which is centered field, active interaction among students, study management in time efficiency, technological supports for system improvement are significant factors on construction and development of Social Welfare e-Learning.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.701-714
• /
• 2009

In the enterprises the data integration based on service requires integrated data management as the change in the environment of enterprises accelerates. Cooperation among enterprises is accomplished through accessing distributed database using business process. As this approach is performed based on the global query, problems such as data heterogeneity, schema heterogeneity, and verification of validity have to be solved in advance for the interoperability among the heterogeneous system. Thus, cooperation requires dynamic and reliable construction. In this paper, we propose XMDR-DSM (eXtended MetaData Registry-Data Service Mediator) system for cooperation. XMDR-DSM, which is comprised of XMDR-DS, XMDR-DQP, and XMDR-DAI, supports the mapping between global schema and local schema and provides data access and integration service. Therefore, XMDR-DSM enables the mutual support of business operations among heterogeneous database. In addition, it can secure information as reusable asset and the standardization of interchange. Also it can manage unified information since it provides business process based on workflow; therefore, it will be able to increase the life span of information and reduce the cost.

• Journal of Drive and Control
• /
• v.19 no.1
• /
• pp.43-50
• /
• 2022

The aim of this study was to conduct basic research on the development of a dual-clutch transmission(DCT) and automatic transmission for agricultural tractors. The DCT layout and the DCT simulation model were developed using commercial software. Power transmission efficiency of the DCT and component power loss were analyzed to verify the developed simulation model. Power loss analysis of the components was conducted according to previous studies and ISO(International Organization for Standardization) standards. The power transmission efficiency of the DCT simulation model was 68.4-91.5% according to the gear range. The power loss in the gear, bearing, and clutch DCT system components was 0.75-1.49 kW, 0.77-2.99 kW, and 5.24-10.52 kW, respectively. The developed simulation model not include the rear axle, differential gear, final reduction gear. Therefore actual power transmission efficiency of DCT will be decreased. In a future study, an actual DCT can be developed through the simulation model in this study, and optimization design of DCT can be possible by comparing simulation results and actual vehicle test.

• Spatial Information Research
• /
• v.21 no.2
• /
• pp.35-43
• /
• 2013

The aim of this research is to analyze the priority to functions of the U-city Service Aid Organization(USAO), which is to support invigorating U-City industry. This research analyzes the relative importance and the priority about the functional area and components of UASO based on AHP. This research also performs a sensitivity analysis. The research result shows that relative importance of functional area is like following orders: 1) distribution of U-City service-related information, 2) quality certification of U-City-related products and services, 3) R&D of U-City technology, 4) standardization of U-City, 5) U-City human resource development. The relative importance order of functional components is 1) establishment of U-City information distribution organization, 2) construction and management of U-City information distribution network, 3) supporting U-City information distribution and price policy, 4) providing U-City information list for distribution, 5) preparation and application of quality certification standard of U-City products and services, 6) research on legal system of U-City items, targets, and procedures for quality certification, 7) research, analysis, and provision of U-City information distribution situation, 8) level examination of constructed infrastructures and services in U-City, 9) U-City core technology development and localization of technology, 10) standardization of collected U-City information, service classification, distribution system. This research result can be applied directly to design functions of USAO. The result also can be used for duty management, human resource planning, or resource allocation.

• Journal of Korean Society of Forest Science
• /
• v.107 no.2
• /
• pp.205-217
• /
• 2018

This study aims to review the standard operation status on wood, pulp and paper industry in Korea according to the industry standardization law which has been revised for strengthening expertise of relevant department and to propose a management strategy of Korean Standards (KS) in figure. Korea Forest Service (KFS) is the responsible department of managing KS on the wood, pulp and paper industry from 2015, and currently opertates three expert committees (wood and wooden construction, wood-based materials, pulp and paper) and wood and paper industry council to review 426 standards. To support an improvement of technical competency and securement of marketability of Korean wood industry, it is about time to review the standards and to develop practical standards since it is managed by specialized department. For this purpose, it is necessary to establish a systematic approach on the management of KS, based on thorough analysis of current KS. To remove possible technical barrier on trade due to the differences of standards between countries, the conformity with international standards is necessary. Also, for sustainability of standard management system, training specialists and building their capability is essential.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.32-42
• /
• 2013

The Korean Government introduced a cultural heritage supervision system in January 2010 to control quality and to prevent poor construction. However, cultural heritage related constructions that require supervision, a scope of supervision, supervision cost and placement of supervisors have not been standardized yet. For this reason, standards of supervision for repair works of cultural heritage that reflect the characteristics of small-scale repair works and restoration of cultural heritage are required. Accordingly, this study has suggested standards of supervision works and cost by analyzing the average construction period that is suitable for the characteristics of cultural heritage repair works. In other words, this study has suggested standards of full-time supervision costs by applying the fixed amount-added method (adding direct labor cost, direct expenses, overhead expenses, engineering fee, charges for additional works and VAT) which is the same as the method of calculating supervision costs for public construction projects because a supervisor has to work full time at a construction site to perform supervision if the project is a mid/large-scale cultural heritage repair work. Also, this study has suggested standards of part-time supervision costs for a small-scale cultural heritage repair work and the ways of supervising the construction projects by visiting the project site on important occasions. According to the result of the analysis by applying the forgoing standards of supervision costs for cultural heritage, a full-time supervision cost for cultural heritage repair works is approximately 98% compared to the construction supervision of a public construction project, and a part-time supervision is approximately 158% compared to architectural construction supervision. It is expected that the valuable cultural heritage of Korea will be preserved by controlling quality of cultural heritage repair works through the application of this study result - the standards of supervision costs for cultural heritage repair works - to an actual project.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.55-63
• /
• 2016

SOA(service oriented architecture) based ESB(enterprise service bus) model is widely adopted in many companies for the safe processing of enormous data and the integration of business system. The existing web service technologies for the construction of SOA, however, show unsatisfactory in practical applications though the standardization of web service security technologies is in progress due to their limitations in safe exchange of data. Internal end users using a large business system based on such environment are composed of the variety of organizations and roles. Companies might receive more serious damage from insider threat than that from external one when internal end users get unauthorized information beyond the limits of their authority for private profit and bad purposes. In this paper, we propose a security architecture capable of identifying and coping with the security threats of web service technologies arouse from internal end users.