• Journal of Korean Society for Quality Management
• /
• v.38 no.3
• /
• pp.313-321
• /
• 2010

The coefficient of variation represents the ratio of the standard deviation to the mean, and it is a useful statistic for comparing the degree of variation from one data series to another, even if the means are drastically different from each other. Recently, the CV control chart is developed for monitoring processes in such situations. However, the CV control chart has low performance in detecting small shift. Due to the development of equipment and technique, currently, small shift of process occurs more frequently than large shift. In this paper, we proposes the CV-CUSUM control chart using CUSUM scheme which is cumulative sum of the deviations between each data point and a target value to detect a small shift in the process. We also found that the FIR(fast initial response) CUSUM control chart is especially valuable at start-up or after a CV-CUSUM control chart has signaled out-of-control.

• YAKHAK HOEJI
• /
• v.51 no.3
• /
• pp.157-163
• /
• 2007

In a pattern analysis of GC-MS of 21 Leonuri herba samples harvested in China and Korea, characteristic differences were observed between Chinese and Korean samples. specifically, Leonuri herba form Hanllasan showed unusual retention time. Rutin was employed as a standard compound of Leonuri herba. All samples had 0.32${\pm}$0.18(%) rutin contents in average, but Korean samples had more rutin than Chinese one, especially the sample from Hanllasan of Jeju showed high-est rutin content (3.2%). In rutin contents of seasonal variation, there were more rutin contents in after blooming, 2years aged Leonuri herba than before.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.824-831
• /
• 2014

In this study, structural variations and overlay errors caused by multiple patterning lithography techniques to print narrow parallel metal interconnects are investigated. Resistance and capacitance parasitic of the six lines of parallel interconnects printed by double patterning lithography (DPL) and triple patterning lithography (TPL) are extracted from a field solver. Wide parameter variations both in DPL and TPL processes are analyzed to determine the impact on signal propagation. Simulations of 10% parameter variations in metal lines show delay variations up to 20% and 30% in DPL and TPL, respectively. Monte Carlo statistical analysis shows that the TPL process results in 21% larger standard variation in delay than the DPL process. Crosstalk simulations are conducted to analyze the dependency on the conditions of the neighboring wires. As expected, opposite signal transitions in the neighboring wires significantly degrade the speed of signal propagation, and the impact becomes larger in the C-worst metals patterned by the TPL process compared to those patterned by the DPL process. As a result, both DPL and TPL result in large variations in parasitic and delay. Therefore, an accurate understanding of variations in the interconnect parameters by multiple patterning lithography and adding proper margins in the circuit designs is necessary.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2001.11a
• /
• pp.6-10
• /
• 2001

Distribution characteristics, variation patterns and affecting factors of hetorotrophic bacteria were studied from April to May 1999 in Bohai Sea by standard Acridine Orange epifluorescence microscopy (AO method). The biomass in surface waters showed a small day-night variation, varying from 0.13-2.51$\mu\textrm{m}$$.$dm$\^$-3/ with an average of 0.84 $\mu\textrm{m}$$.$dm$\^$-3/. The biomass in bottom waters showed, however, a large variation, changing from 0.15-4.18 $\mu\textrm{m}$$.$dm$\^$-3/ with an average of 1.36 $\mu\textrm{m}$$.$dm$\^$-3/. The peak values were obtained at 5 and 11 am. The bottom water biomass showed a significant correlation with particulate organic carbon (r=0.639, p<0.05). Heterotrophic bacteria showed high biomass in nearshore waters and low values in offshore areas with a high biomass zone around Yellow Sea river mouth, which was consistent with the distribution of nutrients. The vertical distribution of heterotrophic bacteria showed biomass in bottom waters was higher than in surface water. The biomass of heterotrophic bacteria in Bohai Sea was similar with that in other marine waters.

• Child Health Nursing Research
• /
• v.13 no.4
• /
• pp.436-443
• /
• 2007

Purpose: An exploratory study was done to examine the validity of the new Ballard scale with extended scoring system(eNBS) in estimating gestational age(AG) in full-term newborns. Method: The eNBS scoring system was extended to include all numbers of total score of NBS and GA to allow a 3-days variation in GA estimatio compared to the original scale which has a 2-week variation due to the application of a 5-score interval for the total NBS score and only even numbers for GA. GA by eNBS(GA-eNBS) was compared with GA by LMP(GA-LMP) and GA by standard NBS(GA-sNBS) in 133 full-term newborns. Difference between GA-LMP and GA-eNBS was analyzed for each GA. Results: Positive correlations were observed in GA-sNBS and GA-eNBS with GA-LMP. There was no difference between GA-LMP and GA-eNBS at 39GA and 40GA. At 37GA and 38GA, GA-eNBS overestimated GA-LMP up to 1 week, while underestimating up to 1 week at 41GA. Conclusions: The accuracy of eNBS was validated within 3 days of variation in GA estimation at 39-40GA. Overestimation by eNBS suggests the possible acceleration of fetal maturity in premature newborns, while underestimation, of the deceleration of fetal maturity in postterm newborns.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.53-59
• /
• 2002

This paper shows the experimental results controlling the height of surface and back bead in GMAW by analyzing the unexpected gaps between base metals produced in welding and by controlling welding velocity due to the variation of the gap between base metals in thin-plate welding. The back bead behavior and burn-through in I-type butt joint $CO_2$ welding of thin mild steel are analyzed in the views of short circuit time ratio and short circuit frequency. It is shown through experimental consideration that the short circuit time ratio method is more reasonable than the short circuit frequency method in analyzing the formulation of back bead under changing the gap between base metals. Based on the these results, welding manipulator is designed so as to satisfy the bead height control in real time by measuring the short circuit time ratio. To show the effectiveness of the developed bead formulation control system, the experiment is implemented under two welding conditions such as increasing gap from 0mm to 0.8mm and gradually increasing gap from 0mm to 1.2mm. The experimental results show that the bead formulation can be controlled uniformly in spite of the variation of the gap between base metals.

• The Journal of Fisheries Business Administration
• /
• v.35 no.1
• /
• pp.117-132
• /
• 2004

This study attempts to suggest a new approach of the estimation of range and degree of fisheries damages caused by a large scale of reclamation undertaken in coastal area using the central limit theorem(CLT) in statistics. The key result of the study is the introduction of the new concept of critical variation of environmental factor($d_{c}$). The study defines $d_{c}$ as a standard deviation of the sample mean($\bar{X}$) of environmental factor(X), in other words, $\frac{\sigma}{ \sqrt{n}}$. The inner bound of $d_{c}$ could be the area of fisheries damages caused by public coastal undertaking. The study also defines the decreasing rate of fisheries production$\delta_{\varepsilon}$, in other words, degree of fisheries damages, as the rate of change in the distribution of sample mean(($\bar{X}$), caused by the continuous and constant variation of environmental factor. Therefore $\delta_{\varepsilon}$ can be easily calculated by the use of table of the standardized normal distribution.

• Journal of the Korean Home Economics Association
• /
• v.30 no.4
• /
• pp.15-26
• /
• 1992

To investigate the seasonal effects on physiological responses of human body, clothing micro-climate, and subjective sensation, selected the cloths the most frequently dressed by men in spring and fall, and completed wearing trials in the climatic chamber. The results are as follows: 1. Rectal temp. ranged 36.8-37.1$^{\circ}C$ in either spring or fall, and no seasonal effect was found. 2. In skin temp., there was no seasonal effect in forehead, abdomen, and forearm. Skin temp. of chest was higher in spring than in fall. On the contrary, reverse was true in high and leg. Average skin temp. ranged 32.2-33.2$^{\circ}C$ in spring and 32.9-34.$0^{\circ}C$ in fall. 3. Average total sweat rate of spring, 79.4g/hr, was smaller than that of fall, 110.9g/hr. 4. Clothing temp. ranged 28.1-32.8$^{\circ}C$ in spring and 27.6-31.$0^{\circ}C$ in fall. Clothing humidity ranged 36.9-48.9% in spring and 38.2-51.1% in fall. Therefore, clothing microclimate was higher during fall than during spring. As results, skin temp. of the body core except chest did not show seasonal variation, but there was obvious seasonal variation in skin temp. of the extremities. Therefore, seasonal variation should be take into consideration in the experiments related to the cloth. In addition, standard for each season and the degree of work performance should be re-established in clothing micro-climate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.27-30
• /
• 2003

Recently, on power system, it is used to high voltage of transmission and distribution due to safe power supply and have high quality and insulation in order to satisfy excellent insulator. Thus, according to underground of high voltage cable, is occurred break down by ground short. Therefore, it is used to high quality XLPE power cable to interrupt instantaneous voltage drop. If it appear inner defect for cable whose have high quality and insulation, it is reduced rapidly due to concentration of electrical field. After assemble to manufacture, in order to inspect cable condition, it is decided much inspection standard. In this paper, In inner defect of assembling cable at manufacture, for measure the variation of insulation condition by void. it tested the variation of insulating characteristics, using $\phi$-q-n distribution variation in partial discharge experiment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.31-40
• /
• 2020

The structure and dynamics of multiple shock waves are studied numerically using a finite volume solver for a model with nozzle exit Mach number of 1.75. At first, the shock variation based on images were analyzed using a Matlab program then later to the wall static pressure variation. The amplitude and frequency variation for multiple shock waves are analyzed. The cross-correlation between the shock location suggests that the first and the second shocks are well correlated while the other shocks show a phase lag in the oscillation characteristics. The rms values of pressure fluctuations are maximum at the shock locations while the other parts in the flow exhibit a lower value os standard deviation.