• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1384-1387
• /
• 1996

SCPI(Standard Commands for Programmable Instrument) is a standard command sets designed for controlling various types of instruments. In order to control FFT(Fast Fourier Transform) analyzing device using SCPI it is required to support sweep measurement function. We defined SCPI command set for FFT analysis and developed parser of defined command set using lex(Lexical Analyzer Generator) and yacc(Yet Another Compiler Compiler). After developing FFT analyzing test was performed with that parser. Up to audible signal frequency the result of FFT analysis was accurate and that result was agree with that of conventional FFT analyzer. As a result it is proved that various types of instruments including sweep measurement instrument can be controlled with appropriate SCPI command sets. Also when developing new instruments the method used in this experiment will contribute to reducing the time required to develop the SCPI parser and increasing reliability.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.333-340
• /
• 2006

In these days the floor vibration is beginning to make its appearance of the environmental dispute in apartment building. Standard floor system are suggested for the settlement of this issue by government. The sound of floor impact sound is needed to secure comfortable quality in housing. Also, it is required an accurate analysis and a proper evaluation for floor vibration. Refine model is necessary for the floor system of housing to analyze accurately the floor vibration. But this refine model is not efficient because it is required so much running time for vibration analysis and it is difficult of modeling of standard floor slab. In this paper, new modeling methods of standard floor slab are proposed for the accurate rigidity evaluation. By using the new modeling method, the accurate vibration response can be obtained and can accurately evaluate the rigidity of standard floor system with resilient materials. Therefore the proposed modeling method is of practical use for vibration analysis of floor system of apartment building.

• Journal of Korean Society for Quality Management
• /
• v.34 no.4
• /
• pp.125-132
• /
• 2006

An adjusted control limit of the $\overline{X}$ chart is proposed for monitoring the continually improving processes. The continual improvement of the process implies the decrease of the process variance, which is represented by a logistic curve. The process standard deviation is estimated by the exponentially weighted moving average of the sample standard deviations from the past to the current times. The control limits are adjusted by the estimated standard deviation at every sampling time. The performance of the adjusted control limit is compared with that of the standard control limits for various cases of the decreasing speed and size of the variance. The results show that the $\overline{X}$ chart with the adjusted control limits provides better performances for monitoring the small and moderate shifts in continually improving processes.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1914-1923
• /
• 2009

KORAIL continuously drives practical reforms of change and originality both internally and externally for the purpose of adapting to rapidly changing circumstance and promote productivity of the organization. Various management strategies are needed to increase its productivity, yet the fist thing to be considered is to select talented human resources. A selection of the human resource should be conducted based on 3R(Right People, Right Place, Right Time). This study empirically analyzes through actual study how the method of new employment introduced on January 1, 2005 positively affects capability and productivity of each member of KORAIL. The area of this study is defined centering on the standard of new employment, capability of personnel, and productivity of the organization. Also, the improvement of new employment standard of KORAIL is suggested as significance of the standard was verified through survey of the standard, the capability and the productivity conducted to KORAIL working personnel.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.121-134
• /
• 2002

Tunneling is a very dangerous and expansive work. Especially, the concrete lining works need many long hours and much cost. As an alternative, the unlined tunneling methods including NMT have been developed in various country. These methods have advantages in cost, time and quality. In Korea, many considerations have been conducted to apply the unlined tunneling method in comparatively good rock. Since primary reinforcements play the role of the final supporting system in unlined tunnels, the initial stiffness and long term durability of reinforcements are very important for tunnel safety. To establish the reinforcements standard suitable to Korea, we investigated the foreign standards and construction cases, comparing geological and construction conditions of foreign land and Korea. As the result, we have proposed the standard of primary supporting system for unlined tunnel in aspects of material, design, construction and quality control etc.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.19-24
• /
• 2004

A number of creep data were collected and filed for type 316LN stainless steels through literature survey and experimental data produced in KAERI. Using these data, polynomial equations for predicting creep life were obtained for Larson Miller (L-M), Qrr-Sherby-Dorn (O-S-D) and Manson-Haferd (M-H) parametric methods. In order to find out the suitability for them, the relative standard error (RSE) and standard error of estimate (SEE) values were obtained by statistical process of creep data. The O-S-D parameter showed better fitting to creep-rupture data than the L-M or the M-H parameters, and the three parametric methods did not generate the large difference in the SEE and the RSE values.

• YAKHAK HOEJI
• /
• v.47 no.5
• /
• pp.261-265
• /
• 2003

Near-infrared (NIR) system was used to determine rapidly and simply indomethacin in buffer solution for a dissolution test of tablets and capsules. Indomethacin standards were prepared ranging from 10 to 50 ppm using the mixture of phosphate buffer (pH 7.2) and water (1 : 4). The near-infrared (NIR) transmittance spectra of indomethacin standard solutions were collected by using a quartz cell in 1 mm and 2 mm pathlength. Partial least square regression (PLSR) was explored to develop calibration models over the spectral range 1100∼1700 nm. The model using 1 mm quartz cell was better than that using 2 mm quartz cell. The PLSR models developed gave standard error of prediction (SEP) of 0.858 ppm. In order to validate the developed calibration model, routine analysis was performed using another standard solutions. The NIR routine analysis showed good correlation with actual values. Standard error of prediction (SEP) is 1.414 ppm for 7 indomethacin samples in routine analysis and its error was permeable in the regulation of Korean Pharmacopoeia (VII). These results show the potential use of the real time monitoring for indomethacin during a dissolution test.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.151-152
• /
• 2019

This study is aimed at comparing the effect of cement mortar made of sulfuric acid treated ISO standard sand with that of cement mortar made of normal ISO standard sand. In the water absorption test, water absorption of standard sand increases with the increase of immersion time in sulfuric acid solution. The results show that at the water cement ratio of 0.5, the longer the standard sand is immersed in sulfuric acid, the greater the compressive strength of the cement mortar sample.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.290-295
• /
• 2019

Salmonella spp. are frequently associated with food and are among the most important foodborne pathogens. The recent Salmonella out breaks in Korea was associated with chocolate mousse cakes served with school meals during September 2018. The objective of this research was to compare the 3M Molecular Detection Assay 2 - Salmonella and the Korean Standard Method of Salmonella in artificially inoculated mousse (chocolate and cheese) and tiramisu cakes. Mousse (chocolate and cheese) and tiramisu cakes were artificially inoculated with S. Typhimurium. Twenty five gram of sample was enriched with 225 mL buffered peptone water for incubation at $37^{\circ}C$ for 24 h. After enrichment, the cultures were analyzed by using the 3M Molecular Detection Assay 2 - Salmonella and the Korean Standard Method. Most of the inoculated samples showed similar results except the chocolate mousse cakes, in which real-time PCR was unable to detect S. Typhimurium even after $10^4CFU/25g$ of inoculation. However, S. Typhimurium inoculated at a concentration of $10^0CFU/25g$ was detected by using 3M Molecular Detection Assay 2 - Salmonella. In chocolate mousse, detection of S. Typhimurium using real-time PCR was partially successful when dark chocolate was added at less than 15%. Negative results in real-time PCR and 3M Molecular Detection Assay 2 - Salmonella were confirmed by gel electrophoresis. The data indicated that dark chocolate could inhibit amplification of the target gene in the PCR reactions. In conclusion, the 3M Molecular Detection Assay 2 - Salmonella was better than the Korean Standard Method (real-time PCR) for the detection of S. Typhimurium in chocolate mousse cakes and chocolate mousse.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.175-181
• /
• 2002

BIS(Bus arrival Information System) is a system that informs Passengers waiting at bus stops of the bus arrival time of next buses. However, when operating this system, it is not exactly known what type of bus arrival information should be provided. The purpose of this paper is to develop a model of the optimal bus arrival time to be informed for BIS. Analyzing Efficiency in the Seoul's Urban Bus Industry Using Data Envelopment Analysis. Two basic types of bus arrival information can be considered. One is Bus Locations : Where next buses are located and under what situation they are, such as the next bus departed from the previous stop, The other is Expected Arrival Time. Time to the arrivals of next buses. Characteristics of these two types of bus arrival time information provided for passengers waiting at bus stops for BIS are examined. The waiting time of passengers at bus stops is derived as a function of the bus arrival time to be informed. Some basic principles about the optimal bus arrival time to be informed are found. Finally, a case study assuming several simplifications is performed. One of the key findings is that there exists optimal arrival time to be informed other than the average arrival time. The optimal arrival time to be informed should be closer to the average arrival time for small and very large standard deviations and be earlier for certain amounts of standard deviations.