• 한국멀티미디어학회논문지
• /
• 제25권4호
• /
• pp.559-567
• /
• 2022

The optimal shipping location is determined by measuring the volume and weights of cargo shipped to non-standard cargo carriers. Currently, workers manually measure cargo volume, but automate it to improve work inefficiency. In this paper, we proposed the method of a real-time volume calculation using LiDar sensor for automating cargo measurement of non-standard cargo. For this purpose, we utilized the statistical techniques for data preprocessing and volume calculation, also used Voxel Grid filter to light weighted of data which are appropriate in real-time calculation. We implemented the function of Normal vectors and Triangle Mesh to generate surfaces and Alpha Shapes algorithms to process 3D modeling.

• 한국축산식품학회지
• /
• 제34권5호
• /
• pp.665-673
• /
• 2014

We compared standard culture methods as well as conventional PCR and real-time PCR for the detection of Listeria monocytogenes (L. monocytogenes) in milk, cheese, fresh-cut vegetables, and raw beef that have different levels of background microflora. No statistical differences were observed in sensitivity between the two selective media in all foods. In total, real-time PCR assay exhibited statistically excellent detection sensitivity (p<0.05) and was less time consuming and laborious as compared with standard culture methods. Conventional culture methods showed poor performance in detecting L. monocytogenes in food with high levels of background microflora, generating numerous false negative results. While the detection of L. monocytogenes in fresh cut vegetable by culture methods was hindered only by L. innocua, various background microflora, such as L. innocua, L. welshimeri, L. grayi, and Enterococcus faecalis appeared on the two selective media as presumptive positive colonies in raw beef indicating the necessity of improvement of current selective media. It appears that real-time PCR is an effective and sensitive presumptive screening tool for L. monocytogenes in various types of foods, especially foods samples with high levels of background microflora, thus complementing standard culture methodologies.

• 한국수자원학회논문집
• /
• 제39권3호
• /
• pp.253-259
• /
• 2006

기존의 거의 모든 수문학적 연구에 있어서, 시스템의 특성을 파악한 뒤 예측을 실시하는 표준접근법이 채택되어왔다. 그러나 최근 들어 시스템의 특성분석에 앞서 예측을 실시하고, 상태공간 매개변수가 시스템의 특성분석단계가 아닌 예측단계에서 평가되는 가역접근법이 제안되었다. 본 연구에서는 최근에 제안된 가역접근법과 기존에 널리 적용되어온 표준접근법을 이론적 카오스 시계열과 Idaho주 Bear강의 일유출량 자료에 적용함으로써, 가역접근법의 적용성을 검토하고 카오스 시계열의 특성을 알아보았으며, 카오스이론이 적용된 비선형 예측기법으로는 부분근사화 기법을 이용하였다. 카오스 특성 분석을 통해, 이론적 카오스 시계열과 Idaho주 Bear강의 일유출량 시계열 자료 모두에서 카오스 특성이 나타남을 알 수 있었다. 200일에 대한 1, 3, 5일 예측 결과, 가역접근법이 표준접근법에 비해 우수함을 알 수 있었다.

• 한국간담췌외과학회지
• /
• 제28권2호
• /
• pp.115-124
• /
• 2024

To compare the outcomes of low central venous pressure (CVP) to standard CVP during laparoscopic liver resection. The study design was a systematic review following the PRISMA statement standards. The available literature was searched to identify all studies comparing low CVP with standard CVP in patients undergoing laparoscopic liver resection. The outcomes included intraoperative blood loss (primary outcome), need for blood transfusion, mean arterial pressure, operative time, Pringle time, and total complications. Random-effects modelling was applied for analyses. Type I and type II errors were assessed by trial sequential analysis (TSA). A total of 8 studies including 682 patients were included (low CVP group, 342; standard CVP group, 340). Low CVP reduced intraoperative blood loss during laparoscopic liver resection (mean difference [MD], -193.49 mL; 95% confidence interval [CI], -339.86 to -47.12; p = 0.01). However, low CVP did not have any effect on blood transfusion requirement (odds ratio [OR], 0.54; 95% CI, 0.28-1.03; p = 0.06), mean arterial pressure (MD, -1.55 mm Hg; 95% CI, -3.85-0.75; p = 0.19), Pringle time (MD, -0.99 minutes; 95% CI, -5.82-3.84; p = 0.69), operative time (MD, -16.38 minutes; 95% CI, -36.68-3.39; p = 0.11), or total complications (OR, 1.92; 95% CI, 0.97-3.80; p = 0.06). TSA suggested that the meta-analysis for the primary outcome was not subject to type I or II errors. Low CVP may reduce intraoperative blood loss during laparoscopic liver resection (moderate certainty); however, this may not translate into shorter operative time, shorter Pringle time, or less need for blood transfusion. Randomized controlled trials with larger sample sizes will provide more robust evidence.

• 산업경영시스템학회지
• /
• 제4권5호
• /
• pp.27-42
• /
• 1981

The object of this paper is to Study the work measurement which is one of the principal technique in work study for the improvement of Productivity in the foundry industry. Most of domestic mechanical enterprise using the expensive foreign machinerise is inoufficient for the standardization of the operation method and time. Therefore, the improvement of operation and productivity through the introduction of the work measurement is an urgent task. Therefore, this paper is contribute to the improvement of operation and to reduce the loss time through the application of the work measurement based on the case study conducted at W-Foundry Corporation. The summary of this study is follows; 1. The measurement of operation efficiency can be accomplished by the standard time. 2. The detailed causes and counter-proposal of loss time can be established, 3. More than 50% of loss time is attributed to c/p.

• 열처리공학회지
• /
• 제2권2호
• /
• pp.33-37
• /
• 1989

In order to improve hardness uniformity of standard-hardness blocks. experimental procedure was designed using Taguchi Method. For this purpose the following factors were studied: austenitizing temperature, tempering condition, grinding condition, subzero treatment, lapping time, $15{\mu}m$ polishing time, final polishing time. These factors were processed and then ten hardness values were measured on each specimen. SN (signal to noise) ratio for each condition was calculated with standard variations of these values. Finally, from the calculated value of ANOVA on SN ratios, the lapping time was found to be the main factor Better uniformity with longer lapping time implies that residual stress that was formed after quenching is a dominent parameter that affects on the uniformity of hardness. Therefore, step-quenching method was adapted to minimize the residual stress. By this modification of quenching procedure, the hardness uniformity was improved remarkably and the yield ratio was increased from 55% to 88%.

• 산업경영시스템학회지
• /
• 제33권2호
• /
• pp.33-38
• /
• 2010

To survive head-to-head competition, we should keep our labor productivities above those of other nations. However, our labor productivities are low compared to those of the developed countries. It is the well-known fact that we make up for the productivities with long work hours. Entering the line of developed nations safely and enjoying well-being age freely, we need to achieve high labor productivities without sacrificing work hours. What would be a fine solution? Back to the basics! Although it is important to enforce R&D on high-tech products, we should have so-called bluebird philosophy, being faithful to the basics and trying to find solutions at a stone's throw. Basics of basics may be unceasing improvement, establishing reasonable standard times, and maintaining them. To support going back to the basics, this thesis proposes VITAMAX, a motion and time study software. As VITAMAX stands for "Visual Improvement and Time Analysis for Maximizing Profits", it provides a simple and powerful visual tool which is useful for improving manual works and determining standard times. Since VITAMAX is based on the Microsoft Excel and VBA, it is very cost-effective and easy to use. VITAMAX may contribute to the profit increase of manufacturing companies, especially for the small and medium-sized enterprise.

• 한국인터넷방송통신학회논문지
• /
• 제22권1호
• /
• pp.141-151
• /
• 2022

무선이어폰은 스마트기기(휴대폰 등)와 함께 소비가 많은 제품으로 일반이어폰 대비 선 꼬임이 없고 편리하여 다양한 가격대의 제품이 시장에 출시되어 있다. 하지만 무선이어폰 품질에 대한 정보는 부족하여 소비자는 브랜드 인지도에 따라 제품을 구매하는 경향이 높고, 제조사는 품질 평가를 위한 측정 방법에 대한 표준이 부재하여 제품마다 다른 기준으로 소비자에게 정보를 전달하고 있다. 특히 무선이어폰의 재생 시간은 소비자의 구매에 직접적인 영향을 줄 수 있는 요소로서 이를 제대로 측정하기 위한 표준화된 시험 방법 마련이 필요하다. 본 논문에서는 무선이어폰에 대한 현황과 관련 표준 동향을 소개하고 이를 통해 개발된 무선이어폰 오디오 재생 시간 측정법을 제시하고자 한다. 또한 본 측정법은 국가표준인 한국산업표준(KS)으로 제정 후 국제표준(IEC)으로 제안할 예정이다.

• 열처리공학회지
• /
• 제13권1호
• /
• pp.10-15
• /
• 2000

Evaluation of long term stability of the Brinell standard hardness tester was carried out to secure its application as a national standard in Brinell hardness. Accuracy and repeatability in load application were tested through evaluating errors in hardness measurement of certified reference blocks. All of those requirements in KS as well as ISO specifications were satisfied by this standard hardness tester. In addition to this, long term stability test of automatic indentation measurement system was carried out. The scattering range was almost the same with its error range. To figure out an optimum test condition for better repeatability and long term stability, the effect of load variation, load application speed and time have been studied using orthogonal array experimental plan. It was found that the best combination is $30{\mu}m/s$ of load application speed and 25 seconds of load application time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.109-110
• /
• 2006

Various parametric methods, Larson-Miller (L-M), Orr-Sherby-Dorn (O-S-D), Manson-Haferd (M-H) parameters, and minimum commitment method (MCM), were used to predict longer rupture time from short-term creep data. A number of the creep data were collected through literature surveys and experimental data produced in KAERI for predicting the creep type of type 316LN SS. Polynomial equations for predicting the creep life were obtained by the time-temperature parameters (TTP) and the MCM. standard error (SE) and standard error or mean (SEM) values were compared for the each method with temperatures. The TTP methods were good in the creep-life prediction, but the MCM was much superior to the TTP ones at $700^{\circ}C\;and\;750^{\circ}C$. The MCM was found to be lower in the SE values compared to the TTP methods