• Preventive Nutrition and Food Science
• /
• v.1 no.1
• /
• pp.99-105
• /
• 1996

Effects of conjugated linoleic acid(CLA), known as an effective anticarcinogen in several aminal models, on the egg production and egg weight of laying hens, and the weight gains of broilers were investigated. CLA was synthesized from corn oil by the alkaline isomerization method and purified by the low-temperature precipitation method. Diets for laying hens and for broilers were synthesized to meet the specification of their NRC standard rationals. Two separated experiments(Experiment I and II) were conducted for laying hens. in experiment I, 45 hens(300 days of age) were divided into 15 hens per treatment group; each hen was housed in wired cage located in a temperature and humidity-controlled house and adopted to the control diet. One week later, each group was subjected to one the four treatment groups for 5 weeks : control, 1.0% CLA, 2.5% CLA and 5.0% CLA diets. Diet and water were ad libitum. The condition of experiment II was the same as that of experiment I except for the addition of 5% corn oil diet and the extension of feeding period to 7 weeks. Egg production, egg weight and feed intake were recorded every week. Forty-five broilers(10day of age) were adopted to the control diet for a week and then switched to the treatment diets for 5 weeks : control, 1.0% CLA, 2.5% CLA, 5% CLA and 5% corn oil, Body weight and feed intake of broilers were measured every week. Diets supplemented with various amounts of CLA enhanced the egg production and increased the egg weight regardless laying hen's age(150 days or 300 days) as compared to control diet. The most effective diet for the egg production and egg weight of young hens(150 days of age) was found to be 1.0% CLA diet, but relatively higher CLA diet(2.5% CLA) was required for old hens (300 day of age) to obtain similar results as seen in younger hens. All hens treated with CLA ate greater amount of feed than control hens. Broilers treated with various amount of CLA ate less feed as compared to control ones, but the body weight gain was greater than the control broilers. These results indicate that CLA enhanced the egg production and agg weight of laying hens, and increased the body weight gain of broilers with less diet consumption.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.15-29
• /
• 2021

The signal intersection is the most challenging space for autonomous vehicles. To promote the safe driving of autonomous vehicles on urban roads with traffic signals, autonomous vehicles need to receive traffic signal information from infrastructure through V2I communication. Thus, a protocol for providing traffic signal information was added to the standard traffic signal controller specification of the National Police Agency. On the other hand, there are technical limitations when applying this to digital traffic signal controllers because the protocols are defined mainly for analog traffic signal controllers. Therefore, this study proposes developing a signal information linkage module to provide traffic signal information from a digital traffic signal controller to an autonomous vehicle and an algorithm improvement method that can provide accurate traffic signal information at the time of traffic signal transition.

• Journal of vocational education research
• /
• v.33 no.3
• /
• pp.145-167
• /
• 2014

The purpose of this research is to prepare the measures for evaluating the job of horse-riding instructor and improvement related to it and for distributing horse-riding industry effectively. Forsuch, we tried to analyze job of horse-riding instructor. Inparticular, we have developed DACUM chart of horse-riding instructor through DACUM method and experts related to it. As result, we found out eight duties and hundreds of job and arranged seven duty areas in total and eighty-two executed works. In addition, as experts said, the horse-riding instructor is the one who 'instructs people learning horse-riding in horse-riding facility and manages horses, horse-riding equipment and man-power.' Such results provide the procedure of horse-riding instructor cultivation which has been presently underway with many viewpoints. Especially, there are three educational processes and subject materials related to horse-riding instructor's examination(Hipologia, Horse-treatment technique, Horse Health management). However, as result of analysis on duty, we found out that racecourse management and horse-riding education theory has been needed to be added and complemented as well. In addition, the work and duty of analysis can be used to be made use up of as work profile and specification and such data can be also made use of as standard of training and submission. Through this study there should be a necessary work to distinguish between re-drafting and role of duty in its own right related to certification of horse-riding instructor in future and it would be necessary to develop study that is able to connect them all to certificate. What is more, there should be work and measure required for rethinking of utility of certification.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.486-497
• /
• 2022

The aim of this study was to subdivide and present the units and the standards of knowledge integration in creating the students' integrated knowledge from content knowledge in college writing classes. For these, it analyzed three typical writing textbooks being used in colleges and examined the ways of presentation on forming integrated knowledge by text qualitative analysis methods. The analysis procedure and the presentation followed Creswell's spiral analysis model It is a method model which repeats the procedure from material collection and analysis to presentation circularly. This examination illustrates three dimensions of the units in forming content knowledge. Also, it suggested those should be all treated for the more systematic education: the units of the whole text, the paragraphs, and the sentences. In the next chapter, the standards and contents of knowledge integration were suggested in each process. For the process of knowledge selection, the suitability and the contradictoriness between the text materials and author's thesis were proposed as the standards and contents. For the process of organization and integration, the corresponsive integration, contradictive integration, background integration, synthetic integration were suggested. Finally the procedure knowledge such as correct expression and spelling, source indication were shown for the process of expression and citation. Furthermore, it showed, in terms of expression, the process of paraphrasing frequently practiced in writing textbooks needs to be exercised in the three dimensions including summarization, connection, and interpretation(or transformation). This result, however, calls for the further study about the subdividing processes to enhance the adequateness to writing textbooks in the level of universities and for a more refined syllabus on the systematic knowledge integration. Accordingly, it suggested the tasks mentioned above for further study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.128-138
• /
• 2022

In this study, in order to apply ultra-high-strength concrete beams of 100 MPa or more manufactured by centrifugal molding as the superstructure of the avalanche tunnel, the purpose is to verify the structural safety of the corner rigid joint in which the centrifugal molded beam is integrated with the substructure, which is the negative moment area. A full-size specimen was manufactured, and loading tests and analysis studies were performed. In order to expect the same effect that the maximum moment occurs in the corner joint part of the upper slab end when the standard model of the avalanche tunnel is designed with a load combination according to the specification, a modified cantilever type structural model specimen was manufactured and the corner rigid joint was fixedly connected. A study was performed to determine the performance of the method and the optimal connection construction method. The test results demonstrated that the proposed connection system outperforms others. Despite having differences in joint connection construction type, stable flexural behavior was shown in all the tested specimens. The proposed method also outperformed the behavior of centrifugally formed beams and upper slabs. The behavior of the corner rigid joint analysis model according to the F.E. analysis showed slightly greater stiffness compared to the results of the experiment, but the overall behavior was almost similar. Therefore, there is no structural problem in the construction of the corner rigid joint between the centrifugally formed beam and the wall developed in this study.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.84-84
• /
• 2003

DNA methylation is involved in epigenetic processes such as X-chromosome inactivation, imprinting and silencing of transposons. DNA methylation is a highly plastic and critical component of mammalian development The DNA methyltransferases (Dnmts) are responsible for the generation of genomic methylation patterns, which lead to transcriptional silencing. The maintenance DNA methyltransferase enzyme, Dnmt 1, and the de novo methyltransferase, Dnmt3a and Dnmt3b, are indispensable for development because mice homozygous for the targeted disruption of any of these genes are not viable. The occurrence of DNA methylation is not random, and it can result in gene silencing The mechanisms underlying these processes are poorly understood. It is well established that DNA methylation and histone deacetylation operate along a common mechanistic pathway to repress transcription through the action of methyl-binding domain proteins (MBDs), which are components of, or recruit, histone deacetylase (HDAC) complexes to methylated DNA. As a basis for future studies on the role of the DNA-methyl-transferase in porcine development, we have isolated and characterized a partial cDNA coding for the porcine Dnmt1. Total RNA of testis, lung and ovary was isolated with TRlzol according to the manufacture's specifications. 5 ug of total RNA was reverse transcribed with Super Script II in the presence of porcine Dnmt 1 specific primers. Standard PCRs were performed in a total volume of 50 ul with cDNA as template. Two DNA fragmenets in different position were produced about 700bp, 1500bp and were cloned into pCR II-TOPO according to the manufacture's specification. Assembly of all sequences resulted in a cDNA from 158bp of 5'to 4861bp of 3'compare with the known human maintenance methyltransferase. Now, we are cloning the unknown Dnmt 1 region by 5'-RACE method and expression of Dnmt 1 in tissues from adult porcine animals.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.87-96
• /
• 2023

There are a lot of difference between the surface settlement and the differential settlement measured at the Busan New Port, where the dredged and reclaimed clay layer exists and below the clay is originally thickly distributed. To find the cause and solution of this, the actual conditions of each differential settlement used for the soft ground improvement, characteristics, installation method, measurement frequency, measurement data management, and data analysis of each type were considered. In the deep soft ground improvement work where large deformation occurs, the bending deformation of the screw-type differential settlement gauge is less than that of other types of measuring instruments, so there is less risk of loss, and the reliability of data is relatively high as the instruments are installed by drilling for each stratum. Since the greater the amount of high-precision settlement measurement data, the higher the settlement analysis precision. It is necessary to manage with higher criteria than the measurement frequency suggested in the standard specification. For the data management of the differential settlement gauge, it is desirable to create graphs of the settlement and embankment height of the relevant section over time, such as surface, differential, and settlement of pore water pressure gauge for each point. In the case of multi-layered ground with different compression characteristics, it is more appropriate to perform settlement analysis by calculating the consolidation characteristics of each stratum using a differential settlement data.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.1
• /
• pp.21-34
• /
• 2023

This study identified the materials and construction methods of 'Old Wall' in 13 villages which were designated as National Registered Cultural Heritage at the time of designation and examined the their structural changes based on field survey. The results are as follows: First, the 'Old Wall' consisted of 10 Soil-Stone Wall and 5 Stone Wall. At the time of designation, Stone Wall, which was built irregularly by dry-construction of natural stones, is similar in shape, but Soil-Stone Wall showed difference by the construction method of making used stones, joints, and faces. Second, the study extracted the changes of 'Old Wall' by repair and examined the changes of construction methods as well as the substitution and addition of materials of structure. The wall-roof was built with cement roof-tile and asbestos slate which have the advantage improve durability and cost-effectiveness. In addition, tile-mouth soil was added to korean traditional roof-tile to prevent rainwater from flowing in. Besides, to improve constructional convenience, the natural stone of the wall-body was replaced with blast stone, float stone and cut stone. Cement block, cement brick and cement mortar were frequently used to repair as well. As Soil-Stone Wall was transformed from irregular pattern-construction to comb pattern-construction and wet-construction was changed to dry-construction, it caused landscape and structural problems. Also, the layer of cement mortar applied to wall-foundation blocked the flow of rainwater that was induced by dry-construction of natural stones. Third, the study regarded that the problem with the repair of 'Old Wall' may occur as it is located in living space, because the owner of the wall could repair for the minor damages without technical knowledge. In addition, it is difficult for repair companies in charge of maintenance of Cultural Heritage to supply local materials, and it is differential construction specifications are not applied.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.17-27
• /
• 2022

A certain level of stability margin airworthiness criteria should be met to secure robustness against uncertainties between the real plant and the model in a flight control system design. The U.S. Department of Defense (DoD) specification of MIL-F-9490D and airworthiness certification standard of MIL-HDBK-516B uses gain and phase margin criteria of flight control system. However, the same stability margin criteria is applied at all development phases without considering the design maturity of each development phase of the aircraft. Ultimately, a problem arises when the aircraft operation envelope is excessively restricted. This paper proposes the relation of handling qualities and stability margin, and presents re-established stability margin criteria as a development phases and verification methods. The results of the research study are considered to contribute to the verification of the stability margin criteria more flexibly and effectively by applying the method to not only the currently manned developing aircrafts but also the unmanned vehicle to be developed in the future.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.427-435
• /
• 2017

Most of the domestic city buses are equipped with the pressure vessels subjected to internal pressure applied by compressed natural gas. Pressure vessels subjected to internal pressure are used in various forms and purposes. Fuel is explosive and has flammable high pressure. The damage of the pressure vessel causes many property damage and loss of life. Safe design for pressure vessel is always necessary. Due to these reasons, many studies using finite element analysis have been conducted. In this paper, the stresses of cylindrical vessel and spherical dome were analyzed using ANSYS, a finite element analysis software. In order to verify the validity of the analysis, a model with a perfectly spherical shape of the dome was designed and observed. Based on the ASME standard in used, stress distribution was also analyzed for models designed with compressed natural gas(CNG). The FEM analysis software agreed with the theory when the dome shape was perfectly spherical. The model designed based on the ASME specification theory, stress concentration occurred in the knuckle part.