• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.102-110
• /
• 2022

Objectives: The purpose of this study is to analyze the content of N,N-dimethylformamide(DMF) in polyurethane coated gloves(PU-gloves) and to assess the dermal exposure generated by wearing them. Methods: We analyzed the concentrations of DMF in 12 gloves by EN16778 standard. The samples cut into pieces of about 10 by 10 mm and extracted with methanol in flask in an ultrasonic bath at 70℃. An aliquot of the extract is analyzed with GC-MS. The dose of dermal exposure was calculated by ECETOC TRA consumer 3.1 and compared with derived no effect level(DNEL) for systemic effects due to long term exposure by workers. The extracted amount of DMF by saline solution was compared with that by EN16778 standard. Results: The mean concentration of DMF in PU-gloves was 1,377 mg/kg(range 13~3,948 mg/kg). The concentration of DMF showed significantly differences by packing type, manufacturer, and price(p<0.05). The dose of dermal exposure was 0.0007~0.572 mg/kg body weight/day when the DMF content was 10~4,000 mg/kg. The DMF extracted by saline solution was around 11% for 8 hours. Conclusions: The risk of dermal exposure due to the residual DMF in the PU-gloves was not signifiant. But, the limit of 1,000 mg/kg in PU-gloves can be recommended for international standard and trading systems.

• 인간식물환경학회지
• /
• 제22권6호
• /
• pp.583-591
• /
• 2019

This study was conducted to examine the effects of wet storage solution, transport period and temperature on vase life and quality of cut flowers in standard chrysanthemum 'Jinba'. Immediately after transport, the fresh weight and flower diameter of cut flowers did not show a difference according to wet storage solutions regardless of the transport period, but as the transport period increased, the fresh weight and flower diameter increased. The flower bud stage at harvest was maintained due to the small changes in flower diameter, and the freshness of leaves was better when transported at 5℃ than at 25℃. When transported at 25℃, the longer the transport period, the lower the quality of cut flowers as some petals opened up and showed early flowering after transport. In preservative solutions, quality of cut flowers transported at 25℃ was lower than that at 5℃ due to fresh weight and diameter according to the longer transport period. The vase life of cut flowers was 1.0 day, 0.8 day, and 7.3 days longer when transported for 3, 5, and 7 days respectively at 5℃ than at 25℃. The quality of cut flowers was better due to increase in fresh weight and flower diameter, as well as vase life in wet storage solutions of ClO₂ and Chrysal OVB than in tap water, regardless of transport period and temperature. There was no difference in fresh weight and vase life between ClO₂ and Chrysal OVB, but flower diameter was greater in ClO₂ than in Chrysal OVB. Therefore, for long-term transport of cut standard chrysanthemum 'Jinba', wet storage transport in ClO₂ at 5℃ was found effective in maintaining the quality and vase life of cut flowers.

• 자원환경지질
• /
• 제38권6호
• /
• pp.657-662
• /
• 2005

Extractions fro fertilizer and soil samples were performed to yield the operationally defined fractions 'soluble' chromate (extractable with $NH_4NO_3$), 'exchangeable' chromate (extractable with phosphate buffer pH 7.2), and these results were compared with the data obtained by extractions with ammonium sulfate, borate buffer pH 7.2, saturated borax pH 9.6, and polyphosphate (Graham's salt). In order to maintain the pH of extractant solution about constant, the concentration of extractant buffer had to be raised to at least 0.5 M. The results strongly depended on the kind of extractant, and the solid: liquid ratio. For most of the samples investigated, the extraction efficiency increased in the order borate-sulfate-nitrate-phosphate. Whereas the recovery of $K_2CrO_4\;and\;CaCrO_4$ added to the samples of basic slags prior to the extraction was about complete, the recovery of added $PbCrO_4$ was highly variable. In soil extracts, the color reaction was interfered from co-extracted humics, which react with the chromate in weak acid solution during the time period necessary for color reaction (1 hour). However, this problem can be overcome by standard addition and subtraction of the color of the extractant solution. In soil extract of about pH < 7, organic material reduced chromate during the extraction period also, and standard addition of soluble chromate is recommended to prove recovery and the stability of chromate in the samples. In admixtures of soils and basic slags, results for hexavalent chromium were lower than from the mere basic slags. This effect was more pronounced in phosphate than in nitrate extracts. As a proficiency test, samples low in organic carbon from contaminated sites in Hungary were tested. The results from $NH_4NO_3$ extracts satisfactorily matched the results of the Hungarian labs obtained from $CalCl_2$ extractants.

• 분석과학
• /
• 제7권3호
• /
• pp.285-291
• /
• 1994

Trichosporon cutaneum을 투석막과 기체투과막 사이에 고정화시켜 산소전극에 부착함으로써 연속적으로 측정할 수 있는 BOD 센서를 개발하였다. 이 센서의 최적 조건은 pH 7.0, $32{\sim}33^{\circ}C$의 온도, $2{\sim}3ml/min$의 flow rate 및 0.1M phosphate 완충용액이었다. ${\Delta}DO$에 대하여 GGA 표준용액의 농도를 도시하였을 때 GGA 60mg/l 이하에서 직선성을 나타니었으며, 30mg/L의 GGA를 사용하였을 때 재현성은 3%의 오차범위를 나타내었다. DO값은 30일 동안 거의 일정하였으며, 감응시간과 회복시간은 각각 약 5분과 10분이었다. 이 센서를 이용하여 실제 폐수의 BOD를 측정하여 $BOD_5$법과 비하였다.

• 지식경영연구
• /
• 제19권2호
• /
• pp.151-162
• /
• 2018

Response surface methodology (RSM) is one of popular tools to support a systematic improvement of quality of design in the product and process development stages. It consists of statistical modeling and optimization tools. RSM can be viewed as a knowledge management tool in that it systemizes knowledge about a manufacturing process through a big data analysis on products and processes. The conventional RSM aims to optimize the mean of a response, whereas dual-response surface optimization (DRSO), a special case of RSM, considers not only the mean of a response but also its variability or standard deviation for optimization. Recently, a posterior preference articulation approach receives attention in the DRSO literature. The posterior approach first seeks all (or most) of the nondominated solutions with no articulation of a decision maker (DM)'s preference. The DM then selects the best one from the set of nondominated solutions a posteriori. This method has a strength that the DM can understand the trade-off between the mean and standard deviation well by looking around the nondominated solutions. A posterior method has been proposed for DRSO. It employs an interval selection strategy for the selection step. This strategy has a limitation increasing inefficiency and complexity due to too many iterations when handling a great number (e.g., thousands ~ tens of thousands) of nondominated solutions. In this paper, a TOPSIS-based method is proposed to support a simple and efficient selection of the most preferred solution. The proposed method is illustrated through a typical DRSO problem and compared with the existing posterior method.

• 한국주조공학회지
• /
• 제38권1호
• /
• pp.9-15
• /
• 2018

Electromagnetic continuous casting (EMCC) was used to fabricate Ti-6Al-4V alloys with properties suitable for medical applications. Ti-6Al-4V alloy ingots fabricated by EMCC were subjected to heat treatment, such as residual stress removing (RRS), furnace cooling after solution treatment (ST-FC) and water-cooling after solution treatment (ST-WC), in order to obtain characteristics suitable for the standard. After component analysis, the microstructure and mechanical properties (tensile strength and elongation) were evaluated by ICP, gas analysis, OM, SEM, a Rockwell hardness tester and universal testing machine. The Ti-6Al-4V alloy ingot fabricated by EMCC was fabricated without segregation, and the lamellar structure was observed in the RRS and ST-FC specimens. The ST-WC specimen showed only martensite structure. As a result of evaluating the mechanical properties based on the microstructure results, we found that the water-cooled heat treatment condition after the solution treatment was most suitable for the Ti-6Al-4V ELI standard.

• The Korean Journal of Physiology
• /
• 제23권1호
• /
• pp.35-42
• /
• 1989

The present study was performed to observe the effects of cations on resting membrane potential and pump activity in the unfertilized eggs of ICR strain mice. After an induction of superovulation, the fresh eggs with zona pellucida were collected and the membrane potentials were recorded. Recordings of membrane potential in this study was obtained from the physiological conditions ($37^{\circ}C$ and 4mM Ca in standard solution), differently from the another reports with unphysiological conditions (room temprature and high Ca in standard solution) for a stable and long-lasting observations. Presented data was obtained within 6 hours after collection from the oviduct. The results observed are as follows, 1) Resting potential of the unfertilized eggs was $-25.8{\pm}3.8mV$ $(Mean{\pm}Se,\;n=31)$. 2) As the K ion concentration was increased, resting membrane potential was depolarized but showed hyperpolarization with $K^{+}$ below 25mM. 3) Alteration of the resting membrane potential for the changes of $Na^{+}$ concentration were hardly observed, while resting potential was hyperpolarized as $Ca^{2+}$ concentration was increased. 4) Pump activity as transient or prolonged hyperpolarization was $-2.29{\pm}0.75mV$ $(Mean{\pm}Se,\;n=16)$, the hyperpolarization was increased in both amplitude and duration under the 10mM $Ca^{2+}$ solution. 5) Hyperpolarization due to pump activity was decreased or disappeared by $5{\times}10^{-5}\;M$ ouabain treatment and could not be observed under the both Na-free and Ca-free solutions. 6) Above results are likely to suggest that the resting potential of the mouse unfertilized eggs is affected to mainly by Ca-dependent K conductance and Na-Ca exchange mechanism and that there is pump activity coupling between $K{+}$, $Na^{+}$ and $Ca^{2+}$.

• 한국물환경학회지
• /
• 제36권4호
• /
• pp.275-283
• /
• 2020

Fecal coliforms are indicator bacteria to evaluate fecal contamination and microbiological safety in environment water. To examine fecal coliforms by membrane filtration, 1% rosolic acid solution dissolved in sodium hydroxide(0.2 M) should be added to m-FC medium according to Korean standard method. To reduce the exposure of researchers to harmful chemicals and expenditure of unnecessary cost, we evaluated if the rosolic acid solution is required to detect fecal coliforms. For 113 samples collected from five intake sources of Seoul, 42 samples of six tributaries, and 11 samples of sewage, the number of fecal coliforms was compared in medium with or without the reagent. As a result, the number was higher in m-FC medium without the reagent, but there was not a statistically significant difference. In the water intake, m-FC medium without the reagent could be used to examine fecal coliforms except in July, August and in case of rainfall. When heterotrophic plate counts exceeded 1,000 CFU/filter, or during rainfall, there was an effect of background bacteria in two types of the medium. However, it was more appropriate to use m-FC medium with the reagent to suppress gram-positive bacteria that can grow on medium without the reagent. In the tributary and sewage samples, the effect of the background bacteria was low, allowing the use of medium without the reagent regardless rainfall. Thus, it is necessary to present in standard method that the addition of rosolic acid solution in m-FC medium can be selected according to the characteristics of samples.

• 한국대기환경학회지
• /
• 제21권4호
• /
• pp.423-430
• /
• 2005

This study was investigated with sample digestion techniques and a reliability of the analytical results for a quantitative analysis of a standard reference material ('urban particulate matter', SRM 1648). The metallic elements were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) with closed vessel microwave acid digestion method and atomic absorption spectroscopy (AAS). Quality control of the overall analytical procedures for metallic element determinations of standard reference material were estimated by analysis of a SRM 1648. Three digestion solutions $(type\;1:\;HNO_3,\;type\;2:\;HNO_3\;and\;H2O_2(4'1)\;mixture,\;type\;3:5.55\%\; HNO_3\;and\;16.75\%\;HCI\;mixture)$ were applied to SRM 1648. As a result, three digestion solutions used in this study are completely unable to digest Cr of SRM 1648. Reliability of Cr and As showed some errors in the digestion with digestion solution type (3) due to the influence of chlorides. Type (3) digestion solutions are sufficient to fulfill the digestion of As as well as Se in SRM 1648. ICP-MS results showed the improvement in accurate and precise determination of some trace elements like Cd, V and Pb in SRM 1648. It is important to use the proper digestion solution for each element to qualify analytical precision.

• 정보화연구
• /
• 제10권3호
• /
• pp.315-321
• /
• 2013

우리군은 국방 아키텍처프레임워크(MND-AF)를 제정하여 전군적, 기관별, 단위시스템 아키텍처를 개발할 때 적용하고 있다. MND-AF의 아키텍처메타모델(AMM)은 국방아키텍처 산출물에서 정의된 아키텍처 정보의 구조를 조직화하고 정보간의 관계를 묘사하고, 참조모델 및 국방 상호운용성 표준인 정보기술표준, 공통컴포넌트, 국방메타데이터 등과 연계를 통해 표준을 기반으로 상호운용성 달성을 지원해야 한다. 그러나 AMM을 살펴보면 상호운용성 표준과의 연계성이 미흡하여 단위시스템 아키텍처를 개발할 때 상호운용성 표준을 원활하게 적용하는 것이 제한되고 있다. 본 논문에서는 단위시스템 아키텍처를 개발할 때 국방 상호운용성 표준으로 관리되는 국방메타데이터 적용을 촉진시킬 수 있도록 국방메타데이터 기반 아키텍처메타모델의 논리데이터모델(OV-7c)을 제안한다.