• Journal of radiological science and technology
• /
• v.43 no.1
• /
• pp.15-21
• /
• 2020

This study was purpose to evaluation of Modulation Transfer Function in Measurements by using the International electrotechnical commission standard(IEC 62220-1) which were edge device each angle by using edge method. In this study was Aero(Konica, Japan) image receptor which is a indirect Flat panel detector(FPD) was used. The size of matrix 1994 × 2430 (14"× 17" inch) which performed 12 bit processing and pixel pitch is 175 ㎛. The results of shown as MTF measurements at IEC standard. The amount of data seemed reasonable and at an MTF value of 0.1 the spatial frequencies were 2.56 cycles/mm at an angle of 2.4°. MTF value of 0.5 the spatial frequencies were 1.32 cycles/mm at an angle of 2.4°. This study were to evaluate MTF by setting each angle 2.0°~2.8° degrees the most effective optimal edge angle and to suggest the quantitative methods of measuring by using IEC.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.5
• /
• pp.549-560
• /
• 1997

The purpose of this study was to understand the arrangement of the religious food and religious diet in Kang-Rung region which was recogniged as cultural region. Investtigation was done by interview person to person, and the results are as follows. 1. The arrangement of religious food and regious diet in Kang-neung region were differed from home to home. 2. In Kang-neung region, Chu-suk religious ceremonies and religious diet were setted much religious diet than memorial service which was held on an anniversary of their's death. 3. At first line, they have arranged Hynbab and Kuk, or Papbaab and Miyegkuk or Paogikuk. On the other hand, Songpyen was placed in traditional standard setting. At second line, they have arranged Songpyen, Kijung, Aegeok, Yukgeok, Nurumgeok, DonBaegigeok, Memilgeok, and cooked octopus(muneo) on the Aegeok. They have also arranged fishes which were the cooked Alaska pollack(rnyongtai), codfish(daeku), flatfish (kajami), yellowtail(bangeo), salmon(yeoneo), trout(songeo) and Saegsunjeon, Dubujeon, Wanjajeon, Kokumajeon. At third line, they have arranged Yuktang, Sotang, Eotang, Altang which is boiled eggs. Altang was arranged instead of steamed chicken. At fourth line, they have arranged Bukeopo, Cuttlefish(dried Ojingeo), Gajamisikhe, Myungtaeposikhe. On the other hand, Sikhe was necessarily placed on the setting of traditional standard service for the ancestor. They have arranged also Chinese bellflower(Doragi), Fernbrake(Kosali), Spinach, Osmund (Kobi), Greenbean Sprouts, Leopard plant(Komchwi), Gourd(Pak), and Lentinus edodes (Pyokjo), but Kimchi was omitted. At fifth line, they have arranged Date, Chestnut, Persimmon, the fruit of Actinidia arguta(Dare), Heron, Banana, Kwajeul and Kangiung were considered as dishes. Dasik and biscut were also used for setting dishes.

• Journal of Families and Better Life
• /
• v.20 no.2
• /
• pp.43-56
• /
• 2002

While there is universal agreement that the ecosystems approach to family resource management is the must influential currently, questions have arisen about the broad applicability of the Deacon & Firebaugh (1988) ecosystems framework. Engberg (1996) has characterized the dominant approach in family resource management as technical and argued that a technical approach substantially restricts feasible actions in much of the world and should not be used in ethical practice. The purpose of the present paper is to compare the family resource management patterns by dual role manager of business owning families in Korea and The United States. Such a comparison is an essential step in the assessment of the usefulness of the Deacon & Firebaugh framework, in particular, and the ecosystems framework, more generally. Korean respondents are 105 family and business managers interviewed in 2000 as part of a survey of owners of small to medium size family business enterprises in Seoul. U.S. respondents are 259 dual role managers in the National Family Business Survey (NFBS 1997). Chi squared statistics indicated country differences on each of the ten(goal setting, standard setting, demand clarification, resource assessment, action sequencing, actuating, checking, adjusting, demand responses, resource change)management practices. Mean responses on eight of the practices(goal setting, standard setting, action sequencing, actuating, checking, adjusting, demand responses, resource changes) were significantly different between two countries. U.S. total score means of family resource management were higher than Korea. Factor analysis of the management scale items yielded different patterns for Korea, and the United States. Korean dual role manager of family business were categorized into three different patterns as classic oriented manager, goal oriented manager, action oriented manager and U.S. were categorized into Process oriented manager and Production oriented manager. Both the number of managerial strategies and the types of strategies used varied in the two countries.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.480-485
• /
• 2012

Use of photovoltaic (PV) power generation system will become more widespread in the future due to anticipated cost reduction in PV technology. As the capacity of PV systems increases, a variation of power system frequency may prevent the stable output of PV system. However, the standard for the frequency protection of distributed generation in Korea Electric Power Corporation (KEPCO)'s rule does not include the setting of frequency protection. Therefore, this paper analyzes the correlation between the frequency protection requirements and the stability of grid-connected PV system for the adjustable operating setting of frequency protection. The distribution system interconnected with 3 MW PV system is modeled by Matlab/Simulink. The various values of frequency are simulated. For studied cases, the stability of PV system is analyzed. It is concluded that the setting of frequency protection is necessary to consider the stability of PV system.

• Journal of Korean Society for Quality Management
• /
• v.50 no.4
• /
• pp.793-810
• /
• 2022

Purpose: As improving the search performance of aviation security equipment is considered essential, this study proposes the need for research on how to find an optimized test sequence that can reduce test time and operator power during the search function test of explosive detection systems. We derive the weights and work difficulty adjustment factor required to find the optimized test order. Methods: First, after setting the test factors, the time of each test and the difficulty scale determined by the worker who performed the test directly were used to derive weights. Second, the work difficulty adjustment coefficient was determined by combining the basic weight adjustment factor and corresponding to the body part used by the test using objective rating. Then the final standard time was derived by calculating the additional weights for the changeability of the test factors. Results: The order in which the final standard time is minimized when 50 tests are performed was defined as the optimized order. 50 tests should be conducted without duplication and the optimal order of tests was obtained when compared to previously numbered tests. As a result of minimizing the total standard time by using Excel's solver parameters, it was reduced by 379.14 seconds, about 6.32 minutes. Conclusion: We tried to express it in mathematical formulas to propose a method for setting an optimized test sequence even when testing is performed on other aviation security equipment. As a result, the optimal test order was derived from the operator's point of view, and it was demonstrated by minimizing the total standard time.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.406-409
• /
• 2005

This paper is related with a standard for verification of program completion when there are complaints for software development. Therefore, in this paper, we propose weight setting method and a method to accommodate relative importance for each function in program.

• Journal of Biosystems Engineering
• /
• v.31 no.1 s.114
• /
• pp.16-23
• /
• 2006

Depth and working load control is one of the most important technique in control system for tractor rotary implement automation. Keeping the depth consistent is critical to bring along crops and to improve the efficiency and quality of the following operations. Keeping the load of engine consistent is an essential factor for the efficiency of operation and engine protection of tractor. In this study we investigated the possibility of application of depth and working load control system for tractor using a proportional valve through field tests. Depth control was implemented by the ascent and descent of 3 point linkage for the change of setting depth. There were 4 mm and 5.2 mm control deviations for setting depths of 50mm and 100mm, respectively. Load control was operated appropriately by the ascent and of descent of 3 point link for the change of setting working load. The standard deviations between setting load and engine load were 171 rpm at 1.3 km/h and 164 rpm at 2.3 km/h tractor travel velocity. The results of experiment showed that the characteristics of response was sufficient to be used as the implement depth and working load control system for tractor using proportional valve.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2018

Objective: Setting therapeutic goals assist to identify patient priorities and predict problem that may arise in performing daily and functional activities. Goal setting is associated with improved rehabilitation outcomes in individuals with hemiparetic stroke. This study was conducted to assess the effects of having awareness and satisfaction of goals on the functional status of individuals with hemiparetic stroke. Design: Cross-sectional study. Methods: Eighty-one people who had been diagnosed with stroke participated in this study. The study was conducted through a face-to-face surveys to identify participants' awareness and satisfaction of goals and standard assessment tools were used to evaluate patients' functional status. This study measured functional status through three clinical measures including the manual function test (MFT), Berg Balance scale (BBS), and modified Barthel index (MBI). Results: In participants with hemiparetic stroke, the MBI, BBS, and MFT scores were significantly higher in the participants who were aware of the therapeutic goal than in those who were unaware (p<0.05). The MBI, BBS, and MFT scores were not significant between the participants who were satisfied with the goal and those who were unsatisfied. Conclusions: This study suggests that having awareness in therapeutic goal-setting could lead to improvement of functional status in those with hemiparetic stroke. This study highlights how goal-setting can have a positive effect on persons with hemiparetic stroke.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.429-442
• /
• 2000

Based on current evidence in the literature, it is known that endotoxin is a weakly adherent surface phenomenon and that power-driven instruments can be used to accomplish definitive root detoxification and maximal wound healing without overinstrumentation of root and without extensive cementum removal. And one of the newly developed curette tips used with low power of piezoelectric ultrasonic scaler, is effective to remove calculus and not to remove the excessive cementum. The purpose of this study is therefore, to assess the influence of ultrasonic power and various working parameters on root substitute removal when instrumentation is performed with the curette tip on piezoelectric ultrasonic scaler. This study assessed defect depth, width and area resulting from instrumentation using a piezoelectric ultrasonic scaler with a curette type tip in vitro to acrylic resin block as a root substitute. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1 N, 2 N) and instrumentation time(5 sec, 10 sec, 20 sec) and power setting was adjusted 0,2,4,8 in P mode. Power setting had the greatest influence on defect depth compared to lateral force and instrumentation time(standardized regression parameter estimates${\pm}$standard error, $0.37{\pm}0.02$, $0.19{\pm}0.02$, $0.07{\pm}0.02$). The effects on defect area also greatest for power setting($0.57{\pm}0.03$) compared to lateral force and instrumentation time($0.33{\pm}0.03$, $0.12{\pm}0.03$). The effect of the power setting on the defect width($0.15{\pm}0.01$) is not so great as defect depth or defect area compared to lateral force($0.12{\pm}0.01$) and effect of instrumentation time is minimal($0.02{\pm}0.01$). It could be concluded that the power setting has the greatest influence on the defect depth and area in curette type tip with low power of piezoelectric ultrasonic device. Many parameters can be adjusted in various situation in clinical use of piezoelectric ultrasonic scaler but the power setting is the first parameter to be adjusted.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.135-137
• /
• 2009

After setting the gold standard for both industrial dropon-demand inkjet printheads and R&D printers for functional materials printing, FUJIFILM Dimatix has developed a printhead with the highest jetting frequency ever obtained. Operating at 100 kHz, the MEMS fabricated SAMBA printhead expands the capabilities of fabrication methods for display applications.