• 대한환경공학회지
• /
• 제32권2호
• /
• pp.185-192
• /
• 2010

본 연구에서는 방해석을 주성분으로 하는 폐굴껍질을 고온에서 소성하여 생석회로 가공한 후 고농도의 납(전함량 29,000 mg/kg)으로 오염된 군부대내 사격장 토양에 처리하여 안정화 효율을 평가하였다. 소성 효과를 평가하고자 소성 전 폐굴껍질(NOS)과 소성 후 폐굴껍질(COS)을 각각 납 오염토양에 처리하였으며 28일간 습윤 양생한 후 0.1N HCl 추출에 의한 가용성 납 농도 변화를 관찰하였다. 실험결과 전 기간 동안 방해석을 주성분으로 하는 NOS에 비해 생석회가 주성분인 COS의 안정화 효율이 높게 나타났다. 또한 완전 습윤 상태 이상의 수분투여는 안정화 효율에 큰 영향을 미치지 않았으며, -#10 mesh에 비해 -#20 mesh의 입경에서 높은 안정화 효율을 나타내었다. NOS에 의한 안정화 처리 결과는 모든 처리에서 토양환경보전법상 '가'지역의 우려1기준 100 mg/kg (환경부 2009년 기준)을 만족 시키지 못 하였으나 COS 15% 및 20% 첨가 시 무처리구의 8,106 mg/kg에 비해 각각 47 mg/kg(28 days) 및 3 mg/kg(28 days)로 현격하게 저감되어 우려기준 100 mg/kg을 만족시켰다. 소성 굴껍질의 안정화 기작을 조사하고자 주사전자현미경(SEM)을 이용하여 elemental dot maps을 수행한 결과 Pb의 안정화는 Al 및 Si와 높은 상관관계가 있음을 확인할 수 있었다.

• 대한화학회지
• /
• 제55권3호
• /
• pp.490-494
• /
• 2011

이산화탄소 방출을 줄이기 위해 포트랜드 시멘트 성분 일부를 시멘트 보충재를 혼합해준 시멘트의 제조에 대해 연구하였다. 이산화탄소를 0.18 kg $CO_2$/kg 정도 줄이기 위해 포트랜드 시멘트에 보충재를 20 wt% 정도 혼합하였다. 이 혼합시멘트의 압축 강도는 포트랜드 시멘트 ASTM C-150의 표준치를 초과하며, 28일간의 굳는 과정중에 37 MPa의 압축 강도를 가졌다. 혼합시멘트의 미세구조는 포트랜드 시멘트와 유사하였다.

• Journal of Ginseng Research
• /
• 제44권3호
• /
• pp.483-489
• /
• 2020

Background: Korean Red Ginseng (KRG) has been known to possess many ginsenosides. These ginsenosides are used for curing cardiovascular problems. The present study show the protective potential of KRG against doxorubicin (DOX)-induced myocardial dysfunction, by assessing electrocardiographic, hemodynamic, and biochemical parameters and histopathological findings. Methods: Animals were fed a standard chow and adjusted to their environment for 3 days before the experiments. Next, the rats were equally divided into five groups (n = 9, each group). The animals were administered with KRG (250 and 500 mg/kg) for 10 days and injected with DOX (20 mg/kg, subcutaneously, twice at a 24-h interval) on the 8th and 9th day. Electrocardiography and echocardiography were performed to study hemodynamics. Plasma levels of superoxide dismutase, catalase, glutathione peroxidase, and malondialdehyde were measured. In addition, the dose of troponin I and activity of myeloperoxidase in serum and cardiac tissue were analyzed, and the histopathological findings were evaluated using light microscopy. Results: Administration of KRG at a dose of 250 and 500 mg/kg recovered electrocardiographic changes, ejection fraction, fractional shortening, left ventricular systolic pressure, the maximal rate of change in left ventricle contraction (-dP/dt_max), and left ventricle relaxation (-dP/dt_max). In addition, KRG treatment significantly normalized the oxidative stress markers in plasma, dose dependently. In addition, the values of troponin I and myeloperoxidase were ameliorated by KRG treatment, dose dependently. And, KRG treatment showed better histopathological findings when compared with the DOX control group. Conclusion: These mean that KRG mitigates myocardial damage by modulating the hemodynamics, histopathological abnormality, and oxidative stress related to DOX-induced cardiomyopathy in rats. The results of the present study show protective effects of KRG on cardiac toxicity.

• 한국지반환경공학회 논문집
• /
• 제3권4호
• /
• pp.37-49
• /
• 2002

본 연구에서는 고강도 고내구성 및 환경에 대한 안정성이 높은 주입재료를 주입재 형태별로 즉 현탁액형, 용액형 주입재에 배합설계를 실시하여 주입압, 지반조건에 따른 주입효과와 환경적 유해성을 분석 검토하고자 한다. 주입재 특성 및 주입효과에 대한 연구결과, 현탁액형 주입재에서는 초미립자시멘트가 보통시멘트에 비하여 상당히 높은 침투성 및 고결율을 나타냄을 알 수 있었고 용액형 주입재에 사용된 인산과 탄산수소나트륨의 경우 초미립자시멘트와 유사한 경향을 나타내었다. 주입된 고결체의 압축강도 시험결과, 현탁액형 주입재의 초미립자시멘트가 상당한 고강도를 나타났으나 용액형 주입재의 경우 현탁액형 주입재에 비하여 매우 낮은 강도를 나타내었다. 또한 주입재가 가지고 있는 환경적 유해성 여부를 평가하기 위해 대상시료를 주입재의 원재료 및 주입재의 고결시편의 양생일수에 따라 중금속 용출시험을 실시한 결과, 선정한 약액조합 및 고결체의 중금속 함량은 규제기준을 만족하였다.

• 한국지반공학회논문집
• /
• 제31권2호
• /
• pp.65-73
• /
• 2015

제방을 보호하기 위하여 법면에 설치되는 호안공사는 국내외 설계기준에 의하여 하상과 호안법면에서의 최대 소류력을 산정하여 제방 사면에 평균적인 개념으로 적용하고 있다. 최근에는 기후변화로 인한 극우강우가 많아지고 호안의 안정성을 위한 평가기법이 제시되지 않기 때문에 호안사면의 수리학적 안정성과 지반공학적 파괴거동의 적절한 평가가 필요하다. 본 연구에서는 하천사면을 보강 시, 최대소류력에 견딜 수 있는 강도를 기존재료인 원지반과 지반개량재를 비교하였다. 지반개량재의 다양한 역학적 실험을 통하여 원지반토와 지반개량재의 함유량에 따른 최적의 혼합비율과 적절한 강도의 양생일을 예측할 수 있었다. 세굴률 시험결과를 바탕으로 원지반토와 지반개량재 혼합토의 허용소류력을 비교 분석한 결과, 호안 제방의 비탈면을 보강하기에 충분한 강도증진과 그에 따른 안정성을 확인할 수 있어 하천호안의 세굴과 침식 방지효과가 있으리라 판단되었다.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.35-48
• /
• 2015

The main objective of this study is to evaluate the long-term performance of various concrete composites in natural marine environment prevailing in the Gulf region. Durability assessment studies of such nature are usually carried out under aggressive environments that constitute seawater, chloride and sulfate laden soils and wind, and groundwater conditions. These studies are very vital for sustainable development of marine and off shore reinforced concrete structures of industrial design such as petroleum installations. First round of testing and evaluation, which is presented in this paper, were performed by standard tests under laboratory conditions. Laboratory results presented in this paper will be corroborated with test outcome of ongoing three years field exposure conditions. The field study will include different parameters of investigation for high performance concrete including corrosion inhibitors, type of reinforcement, natural and industrial pozzolanic additives, water to cement ratio, water type, cover thickness, curing conditions, and concrete coatings. Like the laboratory specimens, samples in the field will be monitored for corrosion induced deterioration signs and for any signs of failureover initial period ofthree years. In this paper, laboratory results pertaining to microsilica (SF), ground granulated blast furnace slag (GGBS), epoxy coated rebars and calcium nitrite corrosion inhibitor are very conclusive. Results affirmed that the supplementary cementing materials such as GGBS and SF significantly impacted and enhanced concrete resistivity to chloride ions penetration and hence decrease the corrosion activities on steel bars protected by such concretes. As for epoxy coated rebars applications under high chloride laden conditions, results showed great concern to integrity of the epoxy coating layer on the bar and its stability. On the other hand corrosion inhibiting admixtures such as calcium nitrite proved to be more effective when used in combination with the pozzolanic additives such as GGBS and microsilica.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.396-401
• /
• 2013

PURPOSE. The purpose of this in vitro study was to investigate the flexural properties of a recently introduced urethane dimethacrylate denture base material (Eclipse) after being repaired with two different materials. MATERIALS AND METHODS. Two repair groups and a control group consisting of 10 specimens each were generated. The ES group was repaired with auto-polymerizing polymer. The EE group was repaired with the Eclipse. The E group was left intact as a control group. A 3-point bending test device which was set to travel at a crosshead speed of 5 mm/min was used. Specimens were loaded until fracture occurred and the mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations were calculated for each group and the data were statistically analyzed. The results were assessed at a significance level of P<.05. RESULTS. The mean "displacement", "maximum load before fracture", flexural strength" and "flexural modulus" rates of Group E were statistically significant higher than those of Groups ES and EE, but no significant difference (P>.05) was found between the mean values of Group ES and EE. There was a statistically significant positive relation (P<.01) between the displacement and maximum load of Group ES (99.5%), Group EE (94.3%) and Group E (84.4%). CONCLUSION. The more economic and commonly used self-curing acrylic resin can be recommended as an alternative repair material for Eclipse denture bases.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.393-402
• /
• 2020

The given research focuses on examining the effect of relatively humidity (RH) and curing temperature on the hydrates as well as the porosity of calcium sulfoaluminate (CSA) cement pastes. Numerous tests, which consist of mercury intrusion porosimetry (MIP), thermosgravi metric (TG) and X-ray diffraction (XRD) were conducted. Various characterization techniques which include, scanning electron microscopy, Fourier transform microscopy along with X-ray diffraction evaluations were conducted on the samples to examine phase formation and crystallinity, morphology and microstructure along with bond formations and functional groups, respectively. During long-term study, the performance of concrete which consisted of limestone and flash-calcined was close to those from standard Portland cement concrete. Traditional classifications and methods of corrosion were widely used for the assessment of steel in concrete which may get employed to concrete which contains LC3 to recalibrate the range of polarization resistance for passitivity condition. For example, there is up to 79.5% and 146% respective flexural and compressive strengths. Moreover, they developed more advance electrical and thermo-mechanical performance with a substantial reduction in absorption of water of close to 400%. These advantages allow this research crucial to evaluate how these methods can be applied. Additionally, the research evaluates developed and more advanced cement preservation and repair techniques. The conclusion suggests concerted efforts by various stakeholders such as policy makers to enable low-carbon rates.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.453-458
• /
• 2001

This study was performed to reuse the dyeing wastewater sludge treated by Fenton process through the solidification/stabilization technique. To solidify the dyeing sludge the industrial by-products such as blast furnace slag, fly ash and waste sand with cement were used. The laboratory scale and pilot scale test were conducted at room temperature to make construction brick which has high compressive strength and low leaching of heavy metals. The experimental results showed that blast furnace slag and fly ash could be used instead of cement and the products satisfied the regulation of Korean Standards. The blast furnace slag increased the compressive strength and the optimum ratio of slag/dyeing sludge on dry basis was found 0.4. The solidifying agent of SB series could increase rapidly the compressive strength and the optimum ratio of solidifying agent/sludge on dry basis was 0.26 at which the strength was two times compared with non-added condition. The portion of waste and industrial by-products in matrix was over 80%. From the pilot test the optimum pressure in molding was 100kg/$\textrm{cm}^2$ at which the compressive strength was over 100kg/$\textrm{cm}^2$. And the strength increased continuously to 160kg/$\textrm{cm}^2$ until 120 days curing time due to pozzolanic reaction. When SB-20 as a solidifying agent was used, the unconfined compressive strength of dyeing sludge could be obtained 110kg/$\textrm{cm}^2$ which satisfied the regulation of cement brick in Korea Standard(KS).

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.23-29
• /
• 2020

철도 공용에 따른 반복 동하중을 지속적으로 경험하는 흙 구조물은 지속적인 침하가 발생한다. 본 논문에서는 흙 구조물을 구성하는 세립분 함량 변화에 따른 시멘트 혼합토의 침하 및 강성 특성을 반복 동하중 시험을 실시하여 평가하였다. 흙의 세립분 함량, 시멘트 함량, 양생일 수을 변화시켜가면서 총 18 케이스의 시험을 실시하였다. 동 시험결과로부터 시멘트 혼합토는 침하 측면에서 시멘트 함량 3% 이상 사용 시 세립분 함량이 높은 흙에서도 침하 저감 가능성이 크다는 것을 확인할 수 있었다. 또한, 시멘트 함량이 0% 에서 3 ~ 4% 로 증가 시 탄성 침하량은 1/4 수준으로, 소성 침하량은 1/6 수준으로 감소하는 것을 확인할 수 있었다. 시멘트 혼합토는 강성 측면에서 시멘트 함량 증가에 따라 회복탄성계수가 증가하는 경향을 보였다. 시멘트 함량 3% 이상 사용 시에는 흙의 세립분 함량 40% 수준에서도 철도 상부노반 다짐 강성 품질기준인 80 MPa을 만족하는 것을 확인할 수 있었다.