• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.21-33
• /
• 2015

Recently, the Korean government announced a new development plan for a large-scale greenhouse complex in reclaimed lands. Wind environments of reclaimed land are entirely different from those of inland. Many standard books for ventilation design didn't include qualitative standard for natural ventilation. In this study, natural ventilation rates were analyzed to suggest standard for ventilation design of venlo type greenhouse built on reclaimed land. CFD (Computational Fluid Dynamics) simulation models were designed according to the number of spans, wind conditions and vent openings. The wind profile at a reclaimed land was designed using ESDU (Engineering Sciences Data Unit) code. Using the designed CFD simulation model, ventilation rates were computed using mass flow rate and tracer gas decay method. Additionally computed natural ventilation rates were evaluated by comparing with ventilation requirements. As a result of this study, ventilation rates were decreased with increasing of the number of spans. Ventilation rates were linearly increased with increasing of wind speed. When the wind speed was $1.0\;m{\cdot}s^{-1}$, only side vent was open and wind direction was $45^{\circ}$, homogeneity of ventilation rate at 0~1 m height is the worst. Finally, chart for computing natural ventilation rate was suggested. The chart was expected to be used for establishing standard of ventilation design.

• Nutritional Sciences
• /
• v.7 no.1
• /
• pp.8-16
• /
• 2004

The purpose of this study was to investigate the gene profiles that were up- or down-regulated in the livers of high-fat diet-induced obese mice and $db_-/db_-$ mice with deficient leptin receptor. C57/BL6 normal mice and $db_-/db_-$ mice, respectively, were divided into two groups and fed a standard or high-fat diet for four weeks. Liver weight was unchanged in the normal mice but the high-fat diet led to a 10% weight increase in the $db_-/db_-$mice. Adipose tissue mass increased by about 88% in the normal mice that were fed a high-fat diet and by about 17% in the $db_-/db_-$mice on the high-fat diet. In terms of serum lipids, total cholesterol significantly increased in mice on the high-fat diet. Microarray analysis was carried out using total RNA isolated from the livers of standard or high-fat diet-fed mice of the normal and $db_-/db_-$ strains. The change of gene expression was confirmed by RT-PCR. About 1.6% and 6.8% of total genes, respectively, showed different expression patterns in the normal mice fed the high-fat diet and $db_-/db_-$ mice. As a result of microarray, many genes involved in metabolism and signal pathways were shown to have different expression patterns. Expression of Mgst3 gene increased in the livers of normal and $db_-/db_-$ mice that were fed a high-fat diet. Wnt7b and Ptk9l were down-regulated in the livers of the normal mice and $db_-/db_-$ mice that were fed a high-fat diet. In conclusion, a high-fat diet induced obesity and affected gene expression involved in metabolism and signal pathway.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.811-814
• /
• 2007

Mobile device will be able to use the various contents from the advancement of the wireless Internet and mobile device manufacture technique. Each devices HTTP headers about under using provides terminal information to contents provider which is provided the contents which is suitable in device. But there is not a standard for a terminal information proηsion and when using the contents of service network outside, interoperability problems mobile communication it will provides terminal information in different method. International Organization for Standard OMA UAProf about under using it solved interoperability problems from outside. But about under using it provides terminal information, MMS support and Smart Card support, against an external storage space supporting information it is not seen clearly UAProf not to be, it will not be able to provide terminal information which is complete. This paper hereupon it designed UAProf in base which provides the contents which has become optimize to the mobile device of domestic environment the mobile device description language which expresses device information which is necessary.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.789-794
• /
• 2000

The Paper studies the flow and heat transfer characteristics to a jet impinging at different oblique angles, to a plane surface by numerical methods. The flowfield and heat transfer rate associated with the oblique Impingement of an axisymmetric jet are of interest as a result of its presence in numerous technological Problems. For the computation of heat transfer rate, the standard ${\kappa}-{\varepsilon}$ and ${\kappa}-{\varepsilon}-\bar {{\upsilon}'^ 2}$ turbulent model were adapted. The accuracy of the numerical calculations was compared with various experimental data reported in the literature. ${\kappa}-{\varepsilon}-\bar {{\upsilon}'^ 2}$ model showed better agreement with experimental data than standard ${\kappa}-{\varepsilon}$ model in prediction of the turbulent intensity and the heat transfer rate. In the case of computation of flowfield, the study carries on the ${\alpha}=45$ deg, h/D=4.95. The jet Reynolds number based on the nozzle diameter(D), was 48,000. For the computation of heat transfer rate, the Re=20,000, the jet orifice-to-plate spacings(L/D) are 4, 6 and 10, and the angle between the axis of the jet orifice and the plate surface is set at 30, 45, 60, or 90 deg. For the smaller spacings, the near-peak Nusselt numbers are not significantly effected by the initial decreases in the Jet angle. The overall shape of the local Nusselt number x-axis profile is influenced by both the jet orifice-to-plate spacing and the jet angle.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.91-101
• /
• 2011

This research aims to suggest web-based 3D face modeling system for hairline modification surgery. As public interests in beauty regarding face escalate with era of wide persoanl mobile smart iCT devices, need for medical information system is urgent and increasing demand. This research attempted to build 3D facing modeling library deploying conventional technology and proprietary software available. Implications from the our experiment found that problems and requirement for developing new web based standard. We suggest new system from our experiment and literature review regarding relevant technologies. Main features of our suggested systems is based on studies regarding hair loss treatment such as medical science, beauty studies and information technology. This system processes input images of 2D frontal and profile pictures of face into 3D face modeling with mesh-data. The mesh data is compatible with web standard technology including SVG and Canvas Tag supported natively by HTML5.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.1
• /
• pp.63-67
• /
• 2016

Severe graft-versus-host disease (GVHD) is an often lethal complication of allogeneic hematopoietic stem cell transplantation (HSCT). The safety of clinical-grade mesenchymal stem cells (MSCs) has been validated, but mixed results have been obtained due to heterogeneity of the MSCs. In this phase I study, the safety of bone marrow-derived homogeneous clonal MSCs (cMSCs) isolated by a new subfractionation culturing method was evaluated. cMSCs were produced in a GMP facility and intravenously administered to patients who had refractory GVHD to standard treatment resulting after allogeneic HSCT for hematologic malignancies. After administration of a single dose ($1{\times}10^6cells/kg$), 11 patients were evaluated for cMSC treatment safety and efficacy. During the trial, nine patients had 85 total adverse events and the rate of serious adverse events was 27.3% (3/11 patients). The only one adverse drug reaction related to cMSC administration was grade 2 myalgia in one patient. Treatment response was observed in four patients: one with acute GVHD (partial response) and three with chronic GVHD. The other chronic patients maintained stable disease during the observation period. This study demonstrates single cMSC infusion to have an acceptable safety profile and promising efficacy, suggesting that we can proceed with the next stage of the clinical trial.

• The Journal of Internal Korean Medicine
• /
• v.27 no.2
• /
• pp.407-415
• /
• 2006

Objectives: Boo-ja and Cheon-o are not commonly prescribed, but are necessary for some clinical conditions, dispite the fact that some negative effects have been known to occur with these medicines. Hence, consequences for aspartate aminotransferase (AST), alanine aminotransferase(ALT) due to herbal medicines, including boo-ja and cheon-o are here reported. Methods: From January 2005 to July 2005, iresults were analyzed for 40 inpatients belonging to the sixth internal medicine department of Dongeui Oriental Medical Hospital who took herbal medicine, including boo-ja and cheon-o, over 20 days. The study is about the comparison and the investigation of LFT, and all results were taken upon their hospitalization and upon their departure. The standard of liver injury was used as a standard for their examinations. Results : 1. No Change in normal limit . 34 of the 40 2. Increased AST. ALT from when they were hospitalized : 2 of 40 Normalized AST, ALT from when they were hospitalized with results higher than normal : 6 of 40 3. These results show no side-effects, therefore suggest that these herbal medicines, including boo-ja and cheon-o. do not cause adverse side-effectsfor patients of this kind if administered as was done in this study.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.3
• /
• pp.323-333
• /
• 2007

This paper presents a study that attempted to improve the site applicability of profile sheets and check the effects of bending reinforcement in composite profiled beams, and consequently, to suggest an improved modular-type CB2 and two types of bending reinforcement methods. As a result of the reinforcing and reforming modular profiled beam experiment conducted, CBIIshowed an adequate deformation capacity as well as a sufficient plastic plateau at the maximum load and thereafter. For all the specimens, an insignificant modular slip occurred while linear relations were kept constant, at up to approximately 50% of the maximum load and at constant linear relations. The experimental values were very low. Probably, due to the small-scale experiment, the area of the concrete for the concrete filling and covering might have been insufficient, which might have led to the failure to improve the strength. Comparing the results with the standard design stress, all the specimens-except for T16 and B16-indicated more than 0.9. Based on the standard design stress, the reinforced modular profiled beam was consideredto have positive applicability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1035-1038
• /
• 2015

The video conference system which enables multiple users even at places away from each other proceed with the work at the same time is required to establish a convenient and efficient smart work environment. The conventional S/W-based video conference system is developed by the different implementation methods using provider's own technology and as a separate program for each OS type of user. On the other hand, the video conference system using HTML5 and WebRTC provides features of video conference system through a web browser that support HTML5 and WebRTC functions without installing any programs In this paper, in order to activate a HTML5-based video conference system in the domestic market, we propose the standard for the interworking functions that need to be supported in each system to ensure the interoperability among different HTML5-based video conference systems.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.167-172
• /
• 2007

VM(Virtual Machine) can be considered as a software processor which interprets the machine code. Also, it is considered as a conceptional computer that consists of logical system configuration. But, the execution speed of VM system is much slower than that of a real processor system. So, it is very important to optimize the code for virtual machine to enhance the execution time. Especially the optimizer for a virtual machine code on embedded devices requires the highly efficient performance to the ordinary optimizer in the respect to the optimized ratio about cost. Fundamentally, functions and basic blocks which influence the execution time of virtual machine is found, and then an optimization for them nay get the high efficiency. In this paper, we designed and implemented the optimizer for the virtual(or abstract) machine code(VMC) using profiling. Firstly, we defined the profiling information which is necessary to the optimization of VMC. The information can be obtained from dynamically executing the machine code. And we implemented VMC optimizer using the profiling information. In our implementation, the VMC is SIL(Standard Intermediate Language) that is an intermediate code of EVM(Embedded Virtual Machine). Also, we tried a benchmark test for the VMC optimizer and obtained reasonable results.