• 대한치과의사협회지
• /
• 제47권3호
• /
• pp.156-161
• /
• 2009

The purpose of this study was to survey a preference to the esthetic profile between Korean women and Korean American women. The interviewee were consisted of 30 Korean women and 30 Korean American women respectively. The survey has been done by using questionnaire. Altered facial profile of each normal male and female was got by moving maxilla, mandible to the front and back to survey the preference among the various profile. Then results were analyzed by SPSS program. The results were as follows, 1. In Korean women, in choosing the men's profile, 9 people out of 30, picked the standard profile as a most preferred profile, and bimaxillary retrusion and bimaxillary protrusion profile were followed by 6 people and 5people respectively. 2. In Korean American women, in choosing the men's profile, the 18 people out of 30, pick the bimaxillary retruded profile as a most preferred profile, and the standard profile were followed. 3. In Korean women, in choosing the women's profile, 18 people out of 30, picked the bimaxillary retruded profile as a most beautiful profile, and standard profile were followed by having 10people's voting. 4. In Korean American women, in choosing the women's profile, the 14 people out of 30, chose the bimaxillary retruded profile as a best one and the standard profile were followed by 12 people's voting. The preference of men's profile was significantly different between two groups (p<0.05) but the both group picked the bimaxillary retruded profile as a most beautiful when they choose the women's profile and then there was no statistical difference between the groups.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.888-894
• /
• 2016

In this paper, we describe a method for precisely measuring the abrasion of the railway using an image processing technique. To calculate the wear of the rails, we provided a method for accurately matching the standard rail profile data and the profile data acquired by the rail inspection vehicle. After the lens distortion correction and the perspective transformation of the measured profile data, we used ICP Algorithm for accurate profile data matching with the reference profile extracted from the standard rail drawing. We constructed the prototype of the Rail Profile Measurement System for High-speed Railway and the experimental result on the three type of the standard rail used in Korea showed the excellent profile matching accuracy within 0.1mm.

• 한국태양에너지학회 논문집
• /
• 제36권4호
• /
• pp.11-20
• /
• 2016

For accurate wind resource assessment and wind turbine performance test, it is essential to secure wind data covering a rotor plane of wind turbine including a hub height. In general, we can depict wind speed profile by extrapolating or interpolating the wind speed data measured from a meteorological tower where multiple anemometers are mounted at different heights using a power-law of wind speed profile. The most important parameter of a power-law equation is a vertical wind profile exponent which represents local characteristics of terrain and land cover. In this study, we calculated diurnal vertical wind profile exponents of 8 locations in Jeju Island who possesses excellent wind resource according to the GUM (Guide to the Expression of Uncertainty in Measurement) to evaluate its uncertainty. Expanded uncertainty is calculated by combined standard uncertainty, which is the result of composing type A standard uncertainty with type B standard uncertainty. Although pooled standard deviation should be considered to derive type A uncertainty, we used the standard deviation of vertical wind profile exponent of each day avoiding the difficult of uncertainty evaluation of diurnal wind profile variation. It is anticipated that the evaluated uncertainties of diurnal vertical wind profile exponents at 8 locations in Jeju Island are to be registered as a national standard reference data and widely used in the relevant areas.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.259-266
• /
• 2002

The basic concept of 'tooth profile modification' is to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring, pitting and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We use the AGMA Standard to design basic gear profile, We also developed a gear design Program using tooth profile modification

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.202-211
• /
• 2002

The basic concept of 'tooth profile modification' to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring, pitting and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We use the AGMA Standard to design basic gear profile. We also developed a gear design program using tooth profile modification.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.632-637
• /
• 2011

A new tooth profile which is adjusted on the amount of addendum modification factor is proposed for reducing vibration and noise of gears. The transmission error of the new profile can be designed more uniformly than that of the standard involute profile. The basic concepts of tooth profile modification are to reduce the load in contact area and to find the appropriate profile modification factor for operation condition. In this study, gears were estimated to constructive safety of bending strength and contact strength durability by using ROMAX program, and were compared with results by design formula of AGMA standard.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.870-875
• /
• 1986

본 연구에서는 랙의 이끝부분을 full-rounded tip으로 설계한 후, 이에 의하 여 창성되는 피니언의 이뿌리곡선을 구하여 전체치형을 완성하였다. 그리고 합성치 형기어의 미끄름율, 유효이뿌리원에서의 공칭굽힘응력과 두쌍접촉호의 길이대 원호부 분접촉호의 길이의 비인 접촉계수를 해석적인 방법으로 구하였다.또한 이들 특성들 과 물림율등 제특성을 비교.검토하여 공구압력각, 인벌류우트부분의 크기를 나타내는 물림각 및 원호반경등의 변화에 대한 제특성의 변화를 고려한 합성치형의 성능을 향상 시킬 수 있는 설계방법을 구하였으며, 합성치형과 표준인버류우트치형을 비교하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제17권3호
• /
• pp.999-1007
• /
• 2006

The semiparametric gamma frailty models have been often used for multivariate survival analysis because they give an explicit marginal likelihood. The commonly used estimation procedure is the profile likelihood method based on marginal likelihood, which provides the same parameter estimates as the EM algorithm. In this paper we show in finite samples the standard profile-likelihood method can lead to an underestimation of parameters, particularly for the frailty parameter. To overcome this problem, we propose an adjusted profile-likelihood method. For the illustration a numerical example and a small-sample simulation study are presented.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.198-203
• /
• 1998

To acquire the high precision of profile for standard electrode of loss angle, it is needed ultraprecision machining technology like MEAP(Magnetic Electronic Abrasive Polishing) and the very high profile measurement technology which can measure a micro unit about the workpiece. So, in this paper, it was developed the measurement system of precision of profile using non-contactable sensor that was approximate sensor of capacitance type, because that is better than others in the electrical characteristics. And standard electrode of loss angle was machined by the MEAP machining technology. In this study, it was development of precision measurement system. This system could be used measure the workpiece of roundness and straightness much more precise and faster than general mechanical measurement system done before. And it could be helped to minimize machining time and planning by very fast and precise measurement about the workpiece.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.375-378
• /
• 2010

Digital photogrammetry workstations are usually based on independent systems which are both expensive and complex. In this paper, through Web Processing Service, which is an Open Geospatial Consortium standard for GIS, is applied to suggest a new approach for processing photogrammetry tasks. WPS profiling is a procedure that defines generic unit process and then categorizes these processes for a specific task. The WPS profile for aerial photogrammetry was designed in this paper to help users to reuse the processes of the profile in different combinations for different tasks.