• 센서학회지
• /
• 제23권4호
• /
• pp.284-289
• /
• 2014

In this paper, modeling of a gate/body-tied (GBT) PMOSFET photodetector with built-in transfer gate is performed. It can control the photocurrent with a high-sensitivity. The GBT photodetector is a hybrid device consisted of a MOSFET, a lateral BJT, and a vertical BJT. This device allows for amplifying the photocurrent gain by $10^3$ due to the GBT structure. However, the operating parameters of this photodetector, including its photocurrent and transfer characteristics, were not known because modeling has not yet been performed. The sophisticated model of GBT photodetector using a process simulator is not compatible with circuit simulator. For this reason, we have performed SPICE modeling of the photodetector with reduced complexity using Cadence's Spectre program. The proposed modeling has been demonstrated by measuring fabricated chip by using 0.35 im 2-poly 4-metal standard CMOS technology.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.95-107
• /
• 1999

The design models of a new product in general are created using clay models or wooden mock-ups. The reverse engineering(RE) technology enables us to quickly create the CAD model of the new product by capturing the surface of the model using laser digitizers or coordinate measuring machines. Rapid prototyping (RP) is another technology that can reduce the product development time by fabricating the physical prototype of a part using a layered manufacturing technique. In reverse engineering process, however, the digitizer generates an enormous amount of point data, and it is time consuming and also inefficient to create surfaces out of these data. In addition, the surfacing operation takes a great deal of time and skill and becomes a bottleneck. In rapid prototyping, a faceted model called STL file has been the industry standard for providing the CAD input to RP machines. It approximates the CAD model of a part using many planar triangular patches and has drawbacks. A novel procedure that overcomes these problems and integrates RE with RP is proposed. Algorithms that drastically reduce the point clouds data have been developed. These methods will facilitate the use of reverse engineered geometric data for rapid prototyping, and thereby will contribute in reducing the product development time.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.57-62
• /
• 2005

Grid-connected photovoltaic (PV) systems were installed and monitored at the field demonstration test center (FDTC) in Korea in October 2002. Before long-term field testing of installed PV systems, the performances of PV components were evaluated and compared through short-term performance tests of each of the PV system components such as power conditioning system and PV module under standard test conditions. A data acquisition system has been constructed for measuring and analyzing the performance of PV systems to observe the overall effect of environmental conditions on their operation characteristics. Performances of PV systems have been evaluated and analyzed not only for component perspective (PV array, power conditioning unit) but also for global perspective (system efficiency, capacity factor, electrical power energy) by review of the field test and loss factors of the systems. These results indicate that it is highly imperative to develop an optimum design technology of grid connected PV systems. The objective of this paper is not only to evaluate and analyze the performance of domestic PV systems application through long-term field testing at FDTC but also to develop evaluation, analysis and optimum technology for long-term stability and reliability of grid-connected PV systems in Korea.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.300-305
• /
• 2017

In this paper, we performed a evaluation for angular and energy dependence of military radiation detector PDR-1K. Its measuring range is divided into two section, low and high, and each range has a GM tube separately owing to broad scale. We observed a change in relative angular reactivity within 0.928 ~ 1.188 in low range and within 0.743 ~ 1.000 in high range from $-90^{\circ}$ to $+90^{\circ}$. The evaluation for energy dependence appeared a relative reactivity within 0.892 ~ 1.000 above 83 keV. This means PDR-1K isn't possible to use below 83 keV of radiation energy. It is possible to provide response information to user and to increase reliability of radiation measurement through this paper.

• 문화기술의 융합
• /
• 제2권4호
• /
• pp.55-59
• /
• 2016

본 논문에서는 물 부족, 불균형을 해결하기 위해 우수 이용률을 높이는 방법의 하나로 지하저류조를 설치하여 빗물을 저장하고, 관리하고자 하는 곳을 위한 저류조 수위의 모니터링과 제어에 대한 시스템을 제안하고 이를 구현하였다. 이를 위해 제어를 위한 모듈에는 ATMEL사의 Atmega 128의 마이크로프로세서를 사용하고 수위를 측정할 수 있는 센서는 접촉식 센서의 일종인 부자형태의 레벨센서를 사용하였다. 특히 레벨센서는 출력을 산업체 일반에서 많이 사용하는 크기로 출력하므로 기존의 센서를 대체할 수 있도록 호환성이 높도록 하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.1-9
• /
• 2018

The spool displacement of directional control valve can be considered as the standard signal to measure the bandwidth frequency of a directional control valve. When the spool displacement is not available, the metering-orifice system is implemented in this research as an alternative way of measuring the 90 degrees phase bandwidth frequency of the hydraulic directional control valve. The inertia effect on the transmission line oil induces the phase lead of the valve load pressure when compared with the phase of spool displacement. The capacitance effect of the oil induces the phase lag of the valve load pressure. The phase of the load pressure can be adjusted to be the same as that of the spool displacement by controlling the opening area of the metering orifice. A series of experiments were conducted to verify the effectiveness of the metering orifice. The 90 degrees phase bandwidth frequency measured from the valve load pressure was significantly deviated in some cases from the frequency of the spool displacement. The metering orifice was hard to be applied to measure the -90 degrees phase bandwidth frequency of the high precision.

• 수산해양기술연구
• /
• 제16권2호
• /
• pp.69-76
• /
• 1980

This paper describes the measurement of the underwater noises produced by the engine vibration around the engine room of stern trawler MIS Sae-Ba-Da(2275GT, 3,600 PS) and pole kner M/S Kwan-Ak-San (243 GT, 1000 PS) while the ship is stopping. The underwater noise pressure level was measured with the underwater level meter of which measuring range is 100 to 200 dB(re bLPa). A and B denotes the maximum pressure level measured at right beneath the bottom of the engine room, while the main engine of the Sae-Ba-Da revoluted at 750 and 500 rpm, respectively. C denotes that of the main engine of the Kwan-Ak-San revoluted at 350 rpm, and D that of the generator of the Sae-Ba-Da revoluted at 720 rpm. Thus A, B, C and D were set for the standard sound source for the experiment. The results obtained are as follows: 1. The noise Pressure level at A, B, C and D were 170.5,165,153 and 158dB, respectively. 2. When the check points distanted vertically 1, 10, 20, 30, 40, 50m from the sound source, the underwater noise presure levels were 170.5, 155, 148, 144 and 138 dB and the directional angle was 116\ulcorner in case of A. 3. The sound level attenuated at the rate of 20dB per 10" meters of the horizontal distance from the sound sources. 4. The frequency distribution of the noise was 100Hz to 10KHz and predominant frequency was 700 to 800Hzminant frequency was 700 to 800Hz

• 한국정보전자통신기술학회논문지
• /
• 제4권2호
• /
• pp.88-95
• /
• 2011

본 연구에서는 코브 각도 측정법을 이용하여 척추 X-ray 영상을 측정할 때에 적용이 용이하도록 추간원판을 뚜렷하게 만드는 영상처리 알고리즘과 코브 각도 측정법을 일일이 적용하지 않고도 척추 전장을 포함하는 X-ray 필름의 기립 후전방 척추 영상을 하나의 척추선 함수 그래프로 변환하여 척추측만 정도 측정에 적용 또는 응용이 용이하게 하는 영상처리 알고리즘을 제시하였다. 척추 X-ray영상의 코브 각도 $1^{\circ}$당 L값의 평균을 산출한 결과는 0.568로 나타났고, 이를 기준으로 척추측만 정도 검출이 가능하였다.

• 대한전자공학회논문지SD
• /
• 제48권6호
• /
• pp.33-38
• /
• 2011

최근들어 모바일기기의 다기능화 와 고성능화로 인하여, 배터리 사용량이 증가하고 있다. 하지만 필요한 컴퓨팅 파워에 비하여 배터리의 에너지 용량증가의 연구는 더디게 진행되고 있다. 그러므로 본 논문에서는 우리는 배터리 방전특성을 이용하여, 배터리의 사용가능 유효용량을 증가시키는 연구를 하였으며, 무선 전송에서 시스템파워를 끄는 것만으로 배터리 사용시간 연장을 하는 기술을 설명한다. 실험은 표준영상 전송을 통하여 배터리 방전간격에 따른 배터리 사용시간을 측정하고, 사용될 어플리케이션과 발견적 실험을 통하여 배터리 사용시간의 최적화를 달성하였다.

• 센서학회지
• /
• 제14권5호
• /
• pp.350-356
• /
• 2005

We have developed a dual-channel type automatic measurement system to evaluate AC-DC current transfer difference of the thermal current converter(TCC) which is primary standard of AC current. The output drift effect of the TCC is minimized by measuring simultaneously the output voltages of two TCCs using voltmeter. Furthermore, the offset voltage of the voltmeter is cancelled nearly out by taking the average values of two outputs of TCCs measured with the forward-reverse directions using dual channel scanner. The uncertainties of the automatic system were 7 to $86{\mu}A/A$ for 3 mA to 10 A at 40 Hz to 20 kHz, which were evaluated by the comparisons between adjacent range of TCCs and inter-comparison with national measurement institute of Germany(PTB). The capability for ac-dc transfer difference measurement was improved by one order compared with that for the manual ac-dc measurement system.