• 한국실내디자인학회논문집
• /
• 제23권3호
• /
• pp.164-172
• /
• 2014

The purpose of this study is to identify current condition of night lighting plan for the outdoor space in an apartment complex and to examine how residents perceive that environment. For this purpose, considerations and standards for safe and agreeable night lighting environment were examined through literature study. And a field study to determine the current state of the night lighting environment was conducted, and finally a survey was executed to find out residents' satisfaction, requirements and consciousness on that lighting environment of apartment complex. Findings of this study can be summarized as follows. Firstly, most standards for night lighting environment focus on the urban environment as a whole, so they have very few clear standards exclusive for the outdoor space of the apartment complex. Secondly, most of outdoor spaces surveyed in this study have met the basic illumination standard, but some spaces had parts where lights were off or out of order forming dark zones, and in some parts lights were screened by trees causing shades, poor safety and a narrowed sight. Thirdly, residents had interest in the night lighting environment of the outdoor space, but they were not fully satisfied with that environment. Fourthly, residents were negative about such factors of the environment as safety, convenience, recognition and aesthetics. These factors should be reflected in planning and improving the night lighting. It is expected that this study provides basic information necessary to plan safer and more agreeable night lighting, and to satisfy the residents' need for liveable apartment complex.

• 한국터널지하공간학회 논문집
• /
• 제14권1호
• /
• pp.93-105
• /
• 2012

대부분의 터널 조명은 인공조명에 의존하고 있어 조명설비의 유지관리비 및 전력비를 절감하기 위해 자연채광을 적용한 기초연구가 선행되었다. 이에 본 연구는 터널 조경 바형식 반사거울시스템의 채광성능(조도, 휘도)을 평가하였다. 수평면 조도를 측정한 결과, 전체 평균 1,170 lx로 미설치 대비 6.5배 이상 증가하여 채광유효구간에서 구간별 터널기준조도(KSA 3703)를 만족시키는 것으로 나타났으며, 터널 밖으로 나오는 반대편 차로 운전자의 휘도를 측정하여 분석한 결과, 전체 평균 3.01로 현휘 기준치인 10 이내로 평가되어 눈부심이 발생하지 않는 것으로 나타났다.

• 디지털콘텐츠학회 논문지
• /
• 제15권4호
• /
• pp.449-455
• /
• 2014

이동 물체의 검출은 비디오 감시, 보행자의 행동 분석과 같은 컴퓨터 시각 분야에서 매우 중요한 전처리 작업이다. 이는 실제 외부 환경을 대상으로 할 때, 영상 시퀀스에 존재하는 배경의 불규칙한 움직임, 조명 변화, 그림자, 배경 물체의 위상 변화 및 잡음 등으로 인하여 매우 어려운 작업이다. 본 논문에서는 코드북 기반의 전경 검출 알고리즘을 제안한다. 코드북은 입력 영상으로부터 얻어지는 배경화소에 대한 정보 데이터베이스이다. 먼저, 첫 번째 프레임을 배경 영상으로 가정하고 이를 입력 영상과 비교하여 차 영상을 구한다. 구해진 차 영상에는 순수한 이동 물체뿐만 아니라, 잡음까지 포함된다. 둘째로, 전경으로 검출된 화소의 색상과 밝기 값을 가지고 코드북을 조사하여 존재하는 경우 잘못 추출된 전경 화소로 판단하고 전경에서 제거한다. 마지막으로, 다음번 입력되는 프레임을 반복 처리하기 위하여 배경 영상을 새롭게 갱신하는데, 배경 화소로 검출된 화소의 경우에는 현재의 입력 영상으로부터 추정되며, 전경 화소로 검출된 경우에는 이전 배경 영상의 화소 값을 복사하여 사용한다. 제안한 알고리즘을 PETS2009 데이터에 적용한 결과를 GMM 알고리즘과 표준 코드북 알고리즘의 결과와 비교하여 보인다.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2014

Among the various building envelope elements, the glass area takes up the largest portion in the office building design. However, a large area of glass can cause problems such as excessive solar radiation, thermal comfort, and glare. Thus it is important to install the glass area to an appropriate level, and control solar radiation and inflow of daylight with blind devices. This study aims to improve the visual performance of the work plane through the automatic control of the venetian blinds. A total of eight kinds of control strategies were chosen; Case 1 does not control the blinds, Case 2 with the blind slats fixed at the angle of 0 degree, Case 3 to 6 using the existing blind control programs, and Case 7 and 8 with improved blind control. Case 3 with 90 degrees had the best energy performance, but the average indoor illuminance was 113lux, which is below the standards. Cases 4 and 5 showed higher levels of interior daylight illuminance with the average of 281lux and 403lux respectively. However, the fixed angles may have difficulties controlling excessive direct sunlight coming into the room and may cause glare. Cases 6 and 7 used sun tracking angle control and cut-off angle control, and the average interior illuminance was measured 250lux and 385lux respectively. Case 8 used the cut-off angle control in an hourly manner, satisfying the standard illuminance of 400lux with an average interior illuminance of 561lux. It was evaluated to be the best method to control direct solar radiation and to guarantee proper level of interior illumination.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.165-173
• /
• 2005

This paper presents the results for deposition of micrometer-scale metal lines on glass for the development of TFT-LCD circuit repair-system. Although there had been a few studies in the late 1980's for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and W(CO)s was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 m depending on laser power and scan speed while the width was controlled between 50um using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below $1{\Omega}{\cdotu}um$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• 한국광학회지
• /
• 제28권6호
• /
• pp.273-280
• /
• 2017

본 논문에서는 낮은 도로 조명을 위한 freeform reflector를 설계하였다. 높이에 비해 넓은 차선까지 배광을 보내야 하는 낮은 도로 조명의 경우, 기존의 등주식 도로 조명에 비해 균제도를 맞추기 힘들다는 단점이 있다. 조명 등급 M3를 만족시키기 위해 reflector를 part 9개로 나누어 part 별 반사면의 기울기를 변화시켜 원하는 배광을 갖도록 하였고, 각 점을 기준으로 fitted curve를 그려 이에 따른 수식을 도출하였다. LightTools의 street light simulation을 통해 M3 조명 등급에 만족하는 것을 확인하였고 직접 제작하여 실제 도로상에서 조명 등급을 만족시키며 설계 결과에 대한 타당성을 입증하였다.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.38-42
• /
• 2018

Continuous efforts are being made to improve the efficiency of Si solar cells, which is the prevailing technology at this time. As opposed to the standard front-lit solar cell design, the back-lit design suffers no shading loss because all the metal electrodes are placed on one side close to the pn junction, which is referred to as the front side, and the incoming light enters the denuded back side. In this study, a systematic comparison between the two designs was conducted by means of computer simulation. Medici, a two-dimensional semiconductor device simulation tool, was utilized for this purpose. The $0.6{\mu}m$ wavelength, the peak value for the AM-1.5 illumination, was chosen for the incident photons, and the minority-carrier recombination lifetime (${\tau}$), a key indicator of the Si substrate quality, was the main variable in the simulation on a p-type $150{\mu}m$ thick Si substrate. Qualitatively, minority-carrier recombination affected the short circuit current (Isc) but not the opencircuit voltage (Voc). The latter was most affected by series resistance associated with the electrode locations. Quantitatively, when ${\tau}{\leq}500{\mu}s$, the simulation yielded the solar cell power outputs of $20.7mW{\cdot}cm^{-2}$ and $18.6mW{\cdot}cm^{-2}$, respectively, for the front-lit and back-lit cells, a reasonable 10 % difference. However, when ${\tau}$ < $500{\mu}s$, the difference was 20 % or more, making the back-lit design less than competitive. We concluded that the back-lit design, despite its inherent benefits, is not suitable for a broad range of Si solar cells but may only be applicable in the high-end cells where float-zone (FZ) or magnetic Czochralski (MCZ) Si crystals of the highest quality are used as the substrate.

• 한국통신학회논문지
• /
• 제34권3C호
• /
• pp.297-303
• /
• 2009

집적 영상 기술은 잘 알려진 3D 영상 기록 및 디스플레이 기술이다. 집적 영상에서 사용되는 대용량 데이터는 3D 영상을 저장하고 전송하기 위한 압축 기법을 요구한다. 기존의 압축 방법에서는 동일한 기록 시스템을 사용한 다할 지라도 요소 영상의 데이터 크기가 3D 물체의 위치, 조명과 렌즈 배열 등의 다양한 기록 조건에 따라 크게 달라진다. 본 논문에서는 기록 조건에 따른 요소 영상 특성의 의존성을 줄이기 위하여 집적 영상에서 요소 영상의 분할 영역을 이용한 압축 기법이 제안된다. 제안된 기법은 각 3D 물체의 픽업 위치에 따른 요소 영상의 지역적 유사성을 고려하여 향상된 압축률을 보여준다. 제안된 기법의 효율성을 보이기 위하여, 다양한 요소 영상들이 픽업되었고 표준 MPEG-4를 이용하여 압축이 진행되었다. 실험을 통하여 제안된 압축 기법이 기존의 압축 방식에 비하여 9%의 압축률 향상을 보였다.

• 한국학교보건학회지
• /
• 제10권2호
• /
• pp.193-211
• /
• 1997

The study was designed to gain necessary basic data in order to grasp the health knowledge, attitude, and practice level of students and teachers of elementary, middle and high schools. This study was conducted through interviews of 3,400 students and 1,022 teachers attending 14 different schools large, middle and small cities and rural towns during a period of nine months (from Oct. 2 1995 to Jun. 30 1996). By the results of this study, the recommendations can be summarized as follows: 1. A school health development committee should be established of 10 members: school health related teachers (physical trainers, nurses, and teachers in charge of health), parents, persons related to health administration, local medical doctors, and student reprensentatives in order to support and immplement school health development plans. 2. Like advanced countries, a health class of 2~4 hours should beplaced in middle and high schools. A nurse majoring in health from a university should be the teacher. 3. A curriculum of health should contain the following: education on health, sex, alcohol, tabacco, the misuse of the drugs, the structure and function of human body, the growth of the body, mental health, safety and emergency care, the prevention of disease, proper eating habits and nutrition, daily health life, family health education, society health, community health, environmental pollution and individual responsibility. 4. Create a school health promotion center, with a nurse's office, and a sports center which has health machines (bars, aerobics, training, twist machine, belt massage, running machine, bench press, chest waist, hack hip extension machine) as well as a physical strength measuring machine (muscular strength, alertness, flexibility, endurance, lung functions and so on), so that the teaching staff and students can use them and train their bodies. 5. Through a refresher education program, urge teachers to understand school health promotion services. 6. Regulate a standard and establish a system of monitoring the physical enviroment of the school (the height of desks and chairs, illumination facilities, ventilation facilities, safe drinking water). 7. Create a check list of health to evaluate improvement.

• 한국광학회지
• /
• 제9권6호
• /
• pp.362-367
• /
• 1998

중심거리측정법은 서로 붙어있는 두 입자 중심점간의 거리를 측정하여 입자의 지름을 구하는 방법이다. 표면장력에 의해 배열이 형성된 시편 입자들의 초점군을 투과식 광학현미경에 평행 레이저광을 입사시켜 얻어내고 CCD 카메라로 영상을 받아 전산 분석하였다. Global lab image라는 영상처리 프로그램으로 초점들의 중심점을 찾고 붙어있는 입자들의 중심점간 거리를 화소(CCD 카메라의 pixel)단위로 계산하였으며, 화소의 좌표는 레이저 간섭계로 변위를 읽는 이송대를 이용하여 교정하였다. 기존의 측정방법을 개선하여 빠른 시간에 간편하게 측정하면서도 표준입자의 배율고정에 충분한 불확도를 얻을 수 있었다. 본 실험에는 NIST 인증물질인 3$\mu\textrm{m}$와 10$\mu\textrm{m}$ 폴리스티렌구(NIST SRM 1962, 1960)를 측정하였으며, 1%이하의 불확도(신뢰도 99% 수준)로써 NIST 결과와비교하였다.