• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.91-99
• /
• 2009

In this paper, a standard field generation method using a micro-TEM ceil is described and its measurement uncertainty is evaluated. The standard field generation system consists of an auto-leveling signal source, a micro-TEM cell operating up to 1.2 GHz, and a power measuring Instrument using a thermistor mount. Measurement results of a field strength key comparison (CCEM.RF-K20) for the field strength of 20 V/m at frequencies between 10 MHz and 1 GHz are presented for validating the standard field generation method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1893-1901
• /
• 1993

This paper presents the field strength standard established using a standard antenna method in the frequency range of 30~1000MHz at KRISS(Korea Research Institute of Standards and Science). Designs on antenna elements and a balun, and the characteristics of an antenna voltmeter are described. The uncertainties in generation the standard fields are analzed and estimated to be 5~14%.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.69-78
• /
• 2013

As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1055-1063
• /
• 2013

CTL cell that is one of the standard electromagnetic generation equipment can measure the characteristic of the electromagnetic susceptibility and the electromagnetic interference. In case of being input the same magnitude signal with the phase difference of 0o or the phase difference of 180o at two input ports of CTL cell to be the fundamental resonant frequency(TE011) of 2.20GHz, the characteristics of the electric field and the magnetic field at the uniform area were measured. And, it measured the electric field characteristic due to the variation of the input power, the test position and the input frequency under the dominant E-field and the dominant H-field of CTL cell. Using these mesuremed data, it examined the operation characteristic and the available frequency band of CTL cell.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.29.1-29.1
• /
• 2020

I review the status of the concordance (standard) LCDM model of cosmology in light of current observations discussing about the apparent tensions in estimation of the key cosmological parameters. I will also briefly discuss the future of the field at the era of the next generation of the astronomical/cosmological surveys.

• Korean Journal of Geomatics
• /
• v.3 no.2
• /
• pp.107-114
• /
• 2004

The National Geographic Information Institute (NGII) in korea, through the National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for production, maintenance, and supply of Korea Digital Elevation Data(KDED). Customer demands for accuracy and resolution of DEM was surveyed through a questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1:5,000), analytical plotter, and LIDAR. The Accuracy standard for KDED was derived based on source data generation methods. As a result of this research, a uniformly spaced grid model was recommended for KDED. Its preferable grid space is 5m in urban areas and its vicinity, and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers' demands for the accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.48-52
• /
• 1999

According to rapid evolution of technologies, recently Standards Developments Organizations(SDOs) In the field of Information and Communication recognize that More new and more complex standards should be developed in shorter time. To cope with this challenge, we propose the functionalities and development directions for implementing standardization information system. Also this paper describes the architecture of the next generation system for standard information that enabling information sharing and exchanging using XML.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.107-114
• /
• 2018

We propose EPD(Electrophoretic Display) file generation system based on template that enable users to choose contents layout for E-paper display. And also we show implementation results that apply the proposed system in digital doorsign management field adopting E-paper display. Template includes information for contents layout which is composed of standard form image to be used as background image, coordinates of area for dynamic data to be inserted, data source about dynamic data, and characteristic data of EPD panel for displaying contents. System administrator registers templates in Forms Server. When user chooses a contents layout, Forms Server automatically generates EPD file for displaying contents in E-paper by using information of the template and sends EPD file into doorsign. Strength of the proposed system lies in reflecting user preference about contents design and adding personal data into E-paper contents by smartphone application.

• Journal of Navigation and Port Research
• /
• v.36 no.2
• /
• pp.105-112
• /
• 2012

In order to improve the existing S-57 standard, International Hydrographic Organization(IHO) has developed S-100 standard, a Universal Hydrographic Data Model(UHDM) expanded from ISO 19100 series standard to hydrographic area, and is in the process of its implementation. International Maritime Organization(IMO) has established CMDS based on e-Navigation strategy data standard as International Association of Lighthouse Authorities(IALA) established IHDM based on aids to navigation data standard and each data standard is linked with the S-100 standard. Fundamental concept and core principles of S-100 standard is suitable not only for the development of a wide range of hydrographic data and service production standard, including the next generation ENC, but also the development of product specification of non-hydrographic area. This study has examined the operation principle of S-100 standard and analyzed its implementation process as e-Navigation data in relation with ENC. It also noted the utilization of S-100 standard based e-Navigation and its potential effect via examining the development cases of S-100 standard-based product specification, such as nautical publication, ship reporting and pilot request, digital routing guide, tide and water level transmission and other important data cases of e-Navigation field.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.02a
• /
• pp.73-81
• /
• 2004

National Geographic Information Institute (NGII) in Korea, through National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for generation, maintenance, and supply of Korea Digital Elevation Data (KDED). Customer demands for accuracy and resolution of DEM was surveyed through questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1 :5,000), analytical plotter, and LIDAR. Accuracy standard for KDED was derived based on source data and generation methods. As results of this research, we recommend uniformly spaced grid model for KDED. Its preferable grid space is 5m in urban and its vicinity; and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers demand for the accuracy.