• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.191-198
• /
• 2020

Background: Stroke patients experience multiple dysfunctions that include motor and sensory impairments. Therefore, new intervention methods require a gradational approach depending on functional levels of a stroke patient's activity and should include cognition treatment to allow for a patient's active participation in rehabilitation. Objects: This study investigates the effect of integrated revision of electrical sensory stimulation, which stimulates somatosensory and action observation training, which is synchronized cognition intervention method on stroke patients' functions. Methods: Twenty-one stroke patients were randomized into two groups. The two groups underwent twenty minutes of intervention five times a week for three weeks. This study used an electromyogram to evaluate symmetric muscle activation of lower extremities and muscle onset time when performing sit to stand before and after intervention. A weight-bearing ratio was used to evaluate the weight-bearing of the affected side in a sit to standing. To evaluate sit to stand performance ability, this study performed five timed sit to stand tests. Results: The two groups both showed statistically significant improvement in muscle onset time of lower extremity, static balance ability in a standing position, and sit to stand performance after the intervention (p < 0.05). In addition, the action observation and synchronized electrical sensory stimulation group showed significant improvement in symmetric muscle activation of lower extremities and weight-bearing ratio of the affected side (p < 0.05). Conclusion: action observation and synchronized electrical sensory stimulation (AOT with ESS) can have positive effects on a stroke patient's sit to stand performance, and the intervention method that provides integrated AOT with ESS can be used as new nervous system intervention program.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.3
• /
• pp.197-200
• /
• 2020

Objective: The purpose of this study was to develop and investigate the feasibility of a sit-to-stand assistive chair using a pneumatic cylinder. Design: Cross-sectional study. Methods: The sit-to-stand assistive chair was developed to assist the sit-to-stand movement by rising up of the chair by a pneumatic cylinder. After the user is seated on the chair, if the pneumatic cylinder pulls the seat plate when standing up, the spring of the pneumatic cylinder, which has been stretched, assists in rising the rear end of the seat plate so that the user can stand conveniently and comfortably. A feasibility test was performed in 10 heathy adults. The electromyographic muscle activation of the trunk and lower extremity muscles was analyzed, which included the erector spinae, rectus abdominis, quadriceps, tibialis anterior, gastrocnemius when standing up from sitting using the developed chair and standing up without using the developed chair. Results: As a result, the sit-to-stand assistive chair using a pneumatic cylinder was developed. In the feasibility test, the use of the developed chair had a decrease in rectus abdominis, quadriceps, tibialis anterior activation compared to those who did not use the device in the healthy adults. Conclusions: The sit-to-stand assistive chair using a pneumatic cylinder may be helpful to reduce the activation of the rectus abdominis, quadriceps, tibialis anterior muscles when performing a sit-to-stand movement. Through the results, the efficacy of the sit-to-stand assistive chair can be confirmed. In the future, further studies are warranted to investigate for the safety and efficacy of its use in the elderly population or those who are disabled.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.1
• /
• pp.41-46
• /
• 2022

Background: The purpose of this study was to develop a sit-to-stand transfer assistive device, and to conduct a feasibility test. Design: A technical note. Methods and results: In this study, we developed a sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. The sit-to-stand transfer assistive device allows the user to transfer the weight from a sitting position to a standing position while shifting the weight forward by grabbing and pulling a support stand. Ten healthy adults participated in the feasibility test of the device. Each participant used the developed sit-to-stand transfer assistive device and investigated supplementation through a brief interview. As a result of the feasibility test, the opinion was that the device could assist the sit-to-stand transfer to some extent. There were opinions that it needed a function to adjust the height of the knee protective plate in the sitting position according to the user's physical characteristics. Because of the inconvenience of operating the lock device for fixing the position and adjusting inclination, there was an opinion that the improvement for a locking device is needed. There were opinions that it would be better to reduce the size of the device due to its inconvenience of portability. Conclusion: In this study, we developed the sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. In addition, it is considered that the upgrade of the device is necessary for the future since there are supplementary opinions on some points.

• IE interfaces
• /
• v.15 no.1
• /
• pp.82-88
• /
• 2002

A study was conducted to develop user-centered kitchen furniture and workspace to reduce fatigue and to prevent housewives's disorders such as low back pain and musculoskeletal disorders from housekeeping activities. A questionnaire survey and interview were performed on 150 households those live in 32Pyung-type($105m^2$) apartment in Seoul vicinity. Also actual housekeeping activities for 24 hours were video-taped for further motion analysis. Results of the study revealed that housewives complained the inconvenience and small size of storage space, and worksurface height as the most important problems to be considered for redesign. And they responded, if feasible, sitting is preferred over standing while they are working. After adapting a sit/stand chair in the kitchen, a physiological experiment measuring heart rate(HR) and oxygen consumption($VO_2$) as response variables was conducted to examine the effects of sit/stand chair in reducing physiological demand during housekeeping activities. The results showed that working on sit/stand chair reduced energy expenditures by maximum of 30% and 31.0% in terms of HR and $VO_2$, respectively. Also rearrangement of kitchen structure based on motion analysis showed that walking distance during daily housekeeping activities can be reduced by 5.5% on the average. Hence, it is concluded that adapting a sit/stand chair in the kitchen could reduce fatigue and occupational disorders of housewives from extended housekeeping activities.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.70-79
• /
• 2015

In this paper, enhanced stand-alone operation and development of Matlab/Simulink model of emergency diesel based hybrid energy system is presented. Simulations based on the remote community or islands were performed for PV-diesel-battery hybrid system. Modeling of PV-diesel-battery integrated system is done to perform under the solar radiation and load conditions on Matlab/Simulink platform. The models of diesel generator unit, battery energy storage system, PV and frequency-power control are developed and simulation studies have been carried out under various conditions using Matlab/Simulink and SimPowerSystem. It is demonstrated that the proposed system can provide reliable and good quality power to the customers in diesel synchronous generator-based hybrid energy systems.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.2
• /
• pp.38-44
• /
• 2003

This paper describes the development of stand-alone image processing module on Strong Arm CPU employing an embedded Linux. Stand-alone image Processing module performs various functions such as thresholding, edge detection, and image enhancement of a raw image data in real time. The comparison of execution time between similar PC and developed module shows the satisfactory results. This Paper provides the possibility of applying embedded Linux successfully in industrial devices.

• Journal of Korean Society of Forest Science
• /
• v.83 no.1
• /
• pp.63-74
• /
• 1994

One of the essential factors to estimate the stem and stand growth is to correctly portray a stem form (profile). It is also required to numerically approximate a stem form in order to dynamically grasp and represent a stand growth. A whole stem form seems to be a conical form but a stem outline at various positions tapers off differently. Accordingly it is difficult to model a whole stand form with single taper equation. A stem taper equation with different coefficients on each subinterval can be useful tools to accurately portray a stem form. This article presents the derivation method of individual stem taper curve using spline function. It is also in this paper aimed to study how a stand taper curve car, be derived from the population of single stem taper curve in a stand. These taper equations numerically formulated enable to dynamically represent and prognosticate the development process of a stand and prepare the foundation of variety on growth model study and rational forest planning model.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.23-31
• /
• 2012

Recent research on stand-alone focused on the improvement and development of functions for solving problems such as the limited operating time of stand-alone installed at dwelling and their low reliability caused by false alarms, but it is more urgent to study on the operating range of stand-alone sensor in consideration of the impacts of combustion products on residents because the primary goal of fire safety is minimizing casualties. This study purposed to propose the optimized operating range of stand-alone sensor in consideration of the impacts of combustion products on residents. For this purpose, we made a mathematical approach to the change of temperature over the lapse of time in compartment fires similar to house fires, and established the standards of the body's response against heat and smoke based on literature review. In addition, we surveyed domestic and foreign technological standards for stand-alone sensor, and converted them to standards for residents of the body's response against heat and smoke using mathematical model equations and analyzed them comparatively.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.209-216
• /
• 2023

This study aimed to use national forest inventory data to develop a forest productivity index and yield prediction model of a Tilia amurensis stand. The site index displaying the forest productivity of the Tilia amurensis stand was developed as a Schumacher model, and the site index classification curve was generated from the model results; its distribution growth in Korea ranged from 8-16. The growth model using age as an independent variable for breast height and height diameter estimation was derived from the Chapman-Richards and Weibull model. The Fitness Indices of the estimation models were 0.32 and 0.11, respectively, which were generally low values, but the estimation-equation residuals were evenly distributed around 0, so we judged that there would be no issue in applying the equation. The stand basal area and site index of the Tilia amurensis stand had the greatest effect on the stand-volume change. These two factors were used to derive the Tilia amurensis stand yield model, and the model's determination coefficient was approximately 94%. After verifying the residual normality of the equation and autocorrelation of the growth factors in the yield model, no particular problems were observed. Finally, the growth and yield models of the Tilia amurensis stand were used to produce the makeshift stand yield table. According to this table, when the Tilia amurensis stand is 70 years old, the estimated stand-volume per hectare would be approximately 208 m³ . It is expected that these study results will be helpful for decision-making of Tilia amurensis stands management, which have high value as a forest resource for honey and timber.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.2
• /
• pp.357-363
• /
• 2011

Objective: The aim of this study is to set the design direction of the lift chair's tilting seat for development. Background: Great attention has been shown to the development of senior friendly product, because of increasing elderly population rapidly in Korea. Therefore, we need to study on sit-to-stand(STS) motion of elderly systematically for developing lift chair that is one of senior friendly products. Method: In this study, we analyzed joint moment(knee, hip) and muscle activity (Erector spinae, Rectus femoris, Vastus lateralis) on STS motion of elderly(female, 60~70: 7) and young people(female, 20~30: 7) using 3 dimension motion capture camera, force plate, wireless EMG. Results: The results of muscle activity showed a similar trend but the results of joint moment were a lot of differences between the young and the elderly. Conclusion: The results of knee joint moment suggest the angle(10~30deg)-adjustable seat that can be better than to find the optimal seat's angle. Application: The method and results of this study are expected to develop senior friendly product and verification as well as be available to various application.