• 제어로봇시스템학회논문지
• /
• 제11권6호
• /
• pp.518-523
• /
• 2005

Strip off-center is one of the major problems in hot strip mill line. The key to good centering is having good equipment, modern control systems, excellent maintenance and an understanding of milling process. Therefore, this study aims to develop a system that is useful for quantitative analysis of strip off-center. In this study, the measuring method of strip off-center was thoroughly studied and the exclusive control board to line scan camera were designed. Also, the manipulated type housing for line scan camera was developed to adjust initial parameters for strip width and center line. In order to check the accuracy and usefulness of the developed system, FM stand in $\#2$ Hot Strip Factory in Pohang Steel Works was targeted.

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1036-1040
• /
• 2002

To process data of digital linescan camera, the frame grabber is essential to handle the data in low-level and in high speed more than 30 MHz stably. Traditional approaches to the development of hardware in vision system for the special purpose are mai y based on PC system, and are expensive and gigantic. Therefore, there are many difficulties in applying those in the field. So we investigate, in this paper, the implementation of FPGA for real-time processing of digital linescan camera. The system is not based on PC, but electronic device such as micropncessor. So it is expected that the use of FPGAs for low-level processing represents a fast, stable and inexpensive system. The experiments are carried out on the web guiding system in order to show the efficiency of the new image processor.

• Architectural research
• /
• 제13권2호
• /
• pp.23-30
• /
• 2011

Critical regionalism has been consistently influential in architecture since the 1980s. While acknowledging its contribution to the discipline of architecture, this article inquires into two co-related issues in critical regionalism as elaborated upon by Kenneth Frampton: critical subjectivity and identity. Regarding critical subjectivity, critical regionalism demands one to stand critical of both tradition and technological development. It assumes that one can locate herself in a neutral zone unshackled from both conditions so that she can make an unbiased judgment. This article criticizes this form of subjectivity by illuminating the situated nature of the subject in the continuity of tradition within which one always stands. The second issue is identity. Keeping the identity of a region through architecture is accepted as a rule in critical regionalism. However, how we shall understand the identity is unclear. This article introduces a notion of identity as rooted in the dialectics of opposites, and demonstrates it by referring to Le Corbusier's architecture and Tetsuro Watsuji's philosophy of climate. The objective of this series of inquiries is not to shake the validity of critical regionalism, but to renew and extend its significance for contemporary architecture.

• 디지털콘텐츠학회 논문지
• /
• 제8권2호
• /
• pp.149-156
• /
• 2007

본 논문에서는 통계 어플리케이션을 웹 서버에서 내려받기 하여 클라이언트에 저장, 설치하고 stand alone 형태로 운영되도록 개발된 DAVIS에 대하여 개발 기법과 구현된 형태를 연구하고, 서버 기반의 통계 프로그램과 클라이언트 기반의 통계 프로그램에 대하여 고찰한다. 그리고 이들 유형에 대한 장단점을 파악하여 좀 더 발전된 통계학습시스템의 설계 방안을 제안한다. 이 시스템은 클라이언트 요청에 의하여 클라이언트에서 어플리케이션이 실행되고, 통계 데이터는 데이터베이스 서버에서 로드하거나 사용자에 의해 클라이언트에서 입력하는 형태로 설계되어 통계 분석을 수행토록 한다.

• 한국CDE학회논문집
• /
• 제8권1호
• /
• pp.55-63
• /
• 2003

ADE i,1 a software tool for the design and implementation of multi-agent systems. ADE allows a designer to draw a multi-agent system graphically, specify the necessary properties, and deploy their applications. ADE offers a set of intuitive, easy to use interfaces that enable a designer to completely specify the agents and agent interactions in a multi-agent system. In this environment, JATLite/sup ［1］/ is improved significantly. Furthermore, ADE provides a unique set of features for a multi-agent system design tool. An agent description method based on Design roadmap/sup ［2］/ theory, a hierarchy of agents, and a fully featured Java-based Graphical User Interface are combined in ADE. This distinct combination of features mates ADE stand out among the existing multi-agent system design tools. This paper presents the research related to the application of the ADE, along with descriptions of its design and implementation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.916-921
• /
• 2004

This paper describes microprocessor-based control of photovoltaic power conditioning system. where the microprocessor is responsible for control of output power in accordance with the generated array DC power. The microprocessor includes the control algorithm of maximum power point tracking and converter control algorithm. In this power, we have designed a MPPT(Maximum Power Point Tracker) algorithm with environment factors and a PWM(Pulse Width Modulation) algorithm for high efficiency. The controller has been tested in the laboratory with the power conditioner and shows excellent performance.

• 공학교육연구
• /
• 제10권2호
• /
• pp.106-117
• /
• 2007

Recently there has arisen an increasing world-wide emphasis on teaching ethics within the engineering curriculum. Much of the teaching has relied on the use of an American model emphasizing autonomy and professional identification. This paper argues that this model is inadequate when engineering is seen in a global perspective, because different cultural values are dominant throughout the world, some of which stand in sharp contrast to traditional Western values based on the primacy of the individual. A new global engineering ethics thus needs to be constructed which takes into account a variety of different cultural values and local circumstances, but which is able to serve as a uniting ethical foundation for engineers throughout the world. The paper suggests that the development of a global code of engineering ethics would be a fruitful way to pursue such a strategy.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.168-171
• /
• 2003

Generally RF AGC (Roll Force Automatic Gauge Control) controls the roll gap using the variation of rolling force caused by the roll eccentricity and the entry thickness of material, but RE AGC takes the bad effect of the roll eccentricity. The Feed-forward (FF) AGC method, which controls the next stand roll gap by the estimation of the thickness variation due to skid mark is needed to supplement the shortage of RF AGC. In this paper, an adaptive filtering method which takes account of the kind of material, the final objective thickness and the rolling speed is proposed to predict skid mark thickness variation. In addition, an improved estimation method of control point using a speedometer and looper angle is suggested. Via on line test, the performance improvement of the suggested FF AGC method is verified.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.79-82
• /
• 2005

Recently the necessity of road data is still being increased in industrial society, so there are many repairing and new constructions of roads at many areas. According to the development of government, city and region, the update and acquisition of road data for GIS (Geographical Information System) is very necessary. In this study, the fusion method with range data(3D Ground Coordinate System Data) and Intensity data in stand alone LiDAR data is used for road extraction and then digital image processing method is applicable. Up to date Intensity data of LiDAR is being studied. This study shows the possibility method for road extraction using Intensity data. Intensity and Range data are acquired at the same time. Therefore LiDAR does not have problems of multi-sensor data fusion method. Also the advantage of intensity data is already geocoded, same scale of real world and can make ortho-photo. Lastly, analysis of quantitative and quality is showed with extracted road image which compare with I: 1,000 digital map.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.721-724
• /
• 2005

In this study the spatial distribution characters of forest in forest damaged area were first considered by analyzing spatial data and monitoring forest landscape. Then suitable tree species on each site were selected through the weighted score analysis of GIS analysis methods. Finally, the best forest stand arrangement method could be presented on the 3D based simulation system for the advanced reforestation technology in Korea. For this purpose, the virtual reforestation system was implemented by using the concept of virtual GIS and CBD (Component Based Development) method. By use of this system the change offorest landscape of burnt forest area some years after reforestation practice could be detected and monitored by applying the site index and 3D modeling method.