• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.420-424
• /
• 2009

Since the sesame pod gets open gradually from the lower to upper parts of the stem due to its different maturity during cutting and binding of sesame, at the conventional work for shattering, the procedures of drying and shattering are repeated two or three times. Therefore, in this study, a drying stand with transparent plastic cover was developed to complete the drying and shattering at the same time. Owing to the developed drying stand, simple drying work, the area for drying was reduced prevention of sesame seeds from loss and rain are available. The performance of developed drying stand was evaluated. Before the drying stand was developed, the conventional method and shattering machine for shattering sesame required at least three times of operation for complete shattering. But After drying stand was developed, the complete shattering works was possible with only one time shattering operation. Finally, the developed drying stand could prevent approximately 5% of the total sesame seed production from loss during drying and shattering works.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.4
• /
• pp.117-124
• /
• 2012

Recent years, many industries acknowledge that environmental substantiality of products must be an essential role and it is one of the major importances for industries to consider the environmental impacts of products at the early stages of product development. This study investigated eco-design parameters and $CO_2-eq$. emissions in each stage of raw material acquisition, manufacturing, transportation, use and disuse in life cycle of touch monitor stand based on Eco-Design. In this study, to fulfill of Eco-Design, the environmental impact assessment of through LCA(Life cycle assessment) was carried out with benchmarking monitor stand and we suggested the direction of new design of touch monitor stand mechanism based on eco-friendly considerations. New design based on LCT(Life Cycle Thinking) showed that the following eco-friendly considerations at the early stage of design to be helpful to reduce GWP(Global Warming Potential) [kg $CO_2-eq$.] in new monitor stand development and it is necessary for Eco-Design process of the product.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.133-144
• /
• 2014

This study was carried out to review the pattern of forest stand development for six Gangwondo Baekdudaegan Mountains which experienced different type and duration of intensive legal protection. Vegetation data from point sampling method were employed to classify community types by cluster analysis on the basis of the importance values of canopy tree species for the study areas. The names of classified communities were given by the composition of dominant tree species. The communities were also compared one another in terms of stand structure by species diversity index. The results indicated that National Parks (Seoraksan and Odaesan) had greater proportion of mixed mesophytic forest type which was supposed to progress further forest succession process so as to have more complex and diversified stand structure. On the other hand, ordinary forest areas (Seokbyeongsan and Deokhangsan) had greater proportion of the forest types which was dominatively composed of Quercus mongolica and Pinus densiflora. The forest types with large amount of these two species would tend to develop for relatively short period of time of 40-50 years after artificial disturbances. Hyangnobong of Natural Protection Area and Hambaeksan of Natural Ecosystem Conservation Area showed intermediate stand development pattern in between National Parks and ordinary forest areas. The period of intensive legal protection of the forest area was positively correlated with species diversity index (R=0.736), and noted that the forest which received intensive protection regulation for longer period tended to show more complex and diversified stand structure.

• The Korean Journal of Ecology
• /
• v.24 no.6
• /
• pp.371-376
• /
• 2001

The rate of soil respiration to varying stand ages was studied in four Robinia pseudoacacia stands(18-, 23-, 28- and 35-year old) throughout one year from September 1998 to August 1999. Soil temperatures showed a pronounced seasonal pattern, in contrast to soil moisture. The highest rate of soil respiration was generally found in August when soil temperatures were the highest, and the lowest in January. The daily rate of soil respiration amounted to 5.51($g\;CO_2{\cdot}m^{-2}{\cdot}day^{-1}$) for 18-year old stand, 5.28 for 23-year old stand, 8.29 for 28-year stand, and 2.67 for 35-year old black locust stand, respectively. The $Q_{10}$ values were ranged between 1.63 and 1.66, averaging 1.65 for the R. pseudoaca'cia stands. The results indicate significant correlation between soil temperature and soil respiration for all four stands(r=0.96 to 0.97). Among the study stands, the annual rate of soil respiration was the highest ($3.03kg\;CO_2{\cdot}m^{-2}{\cdot}yr^{-1}$) for 28-year old stand.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.1-7
• /
• 2012

In this paper, we present a new lighting control method considering ambient light in addition to the required lighting illumination for efficient energy saving of a LED stand. We estimate accurate environmental illuminance using a cheap illuminance sensor by modeling measured- and actual-illuminance using quadratic polynomial approximation. The relation between PWM(Pulse Width Modulation) duty ratio and illuminance intensity is modeled by a linear model. Illumination of the LED stand is controlled by estimating the difference of required illumination and the estimated ambient illumination. The developed LED stand has reduced electric energy consumption compared with a conventional manually controlled LED stand with the same lighting source. In addition, human subject evaluation shows that the LED stand, which is applied the proposed method, is more satisfactory than conventional ones since the proposed automatic controlled illumination produce more accurately required lighting and it is convenient.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.129-135
• /
• 2019

This paper is part of research and development for stand-alone solar system without commercial power supply. It implements firmware of controller for operation of stand-alone solar system by applying IoT technology and also develops communication modules that allow multiple solar lamps to send and receive data through wireless network. The controller of the developed stand-alone solar system can effectively charge the power generated by the solar module, taking into account the battery's charge and discharge characteristics. It also has the advantage of attaching wireless communication modules to solar lamp posts to establish wireless communication networks without incurring communication costs. In addition, by establishing IoT gateway middleware platform for each installation site, it forms a foundation to operate multiple solar lamp posts into multiple clusters. And, it is expected that the data collected in each cluster will be used to enable configuration and control of operational information, thereby inducing convenience and efficiency of remote operation and management.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.383-388
• /
• 2003

The stand alone PV system's stability and cost is influenced by a design method, as its application products are various. In order to systematize the the stand alone PV system's design method based on experience, this research settled the capacity computation method of PV module and battery and developed a simulator. And Its characteristic is confirmed by applying to PV street lamp design.

• Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.85-98
• /
• 2022

Background: Korean white pine (Pinus koraiensis) is a major commercial species, and the importance of the oak trees (Quercus spp.) is increasing due to various factors such as environmental and ecological values. However, more information is required to clearly understand the growth characteristics of these species especially regarding thinning intensity. This study was performed to provide the basic information to develop the silvicultural guideline and field manual by analyzing tree and stand characteristics in line with thinning intensity in the Korean white pine plantation and oak-dominated natural deciduous forest. Results: Diameter at breast height (DBH) and volume changes by the thinning intensity in the Korean white pine plantation were significantly different from those in the oak-dominated deciduous natural forest. In particular, DBH distribution in the pine stand appeared that there were more large diameter trees as the thinning intensity was higher. DBH periodic annual increment (PAI) of the pine stand was higher as the thinning intensity was stronger and the growth period was shorter. This trend was similarly shown in the natural deciduous forest, but the amount of PAI was smaller than in pine stand. The volume PAI after thinning was not decreased over time. In each stand type, the PAI tended to be lower as stand density was higher. The volume PAI in the pine stand was significantly higher than that in the oak-dominated natural deciduous forest. Dead trees occurred the most in the unthinned plots of each stand type, and those were higher in the natural deciduous forest. Ingrowth trees were observed only in the natural deciduous forest, and its distribution was the lowest in unthinned plots; Korean white pine as ingrowth occurred the most frequently among many tree species. Conclusions: Different effects of thinning treatment on DBH and volume PAI, mortality, and ingrowth were observed for each stand. With respect to forest growth, Korean white pine plantation was superior to the oak-dominated natural deciduous forest. The results of this study offer fundamental information for the development of silvicultural guidelines for Korean white pine plantations and oak-dominated natural deciduous forests in Korea.

• The Journal of Korea Robotics Society
• /
• v.18 no.4
• /
• pp.385-391
• /
• 2023

In the elderly population, sarcopenia occurs due to physical aging, leading to movement restrictions and loss of function. This results in dependence on daily activities and limitations in participation, ultimately decreasing the overall quality of life. In this study, we propose an algorithm designed to enable patients with sarcopenia to perform sit-to-stand and stand-to-sit movements seamlessly in their daily lives. The algorithm incorporates a wearable robot for muscle support and includes algorithms for standing and seated muscle strength support. To validate the algorithm's performance, EMG sensors were attached to the Rectus Femoris and Biceps Femoris muscles. The participants underwent two scenarios: one without wearing the device and one with the device providing muscle strength support, performing sit-to-stand and stand-to-sit motions for one minute in each case. The results showed a 16% increase in the EMG peak value of the Rectus Femoris muscle during standing motion (p=0.009). On the right side, there was a roughly 20% decrease (p=0.018) during standing and a 21% decrease (p=0.014) during sitting motion. In the future, we aim to gather additional data to further refine the algorithm. Our goal is to develop an optimal muscle strength support algorithm based on this data, making it applicable for real-life use by patients with sarcopenia.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.119-127
• /
• 2018

A test stand for an altitude test of reciprocating engine was designed, manufactured and validated by preliminary tests and simple calculations. The test stand was designed to interface with the altitude turbo-shaft engine test facility of Korea Aerospace Research Institute. Many limiting conditions for altitude test of reciprocating engine were assumed and the test stand was developed to satisfy these limitations. The test stand design was focused especially on the altitude, Mach number and fuel temperature control for reciprocating engine altitude tests with smaller air and fuel flow than those of turbo shaft engines.