• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.233-237
• /
• 2003

This study was conducted to provide a rational forest management method for a natural oak (Quercus variavilis) forest stand in the central part of South Korea based on characteristics of growth and water relation parameters. Average volume per hectare was 175.1 ㎥ in the study site of oak stands. Basal area and volume of each direction appeared to increase as the slope direction moves from north to south, but annual mean increment and periodic annual increment of DBH for 10 years showed the lowest value at the southern aspect. Maximum water potentials measured between 12 and 14 o'clock were analyzed by direction and elevation in the oak stands. Water potential of oak decreased as the slope changed from the north to the south aspect and water potential increased at lower elevations. Soil water content for the oak stands tended to decrease as the aspect shifted from north to south. Water potential and soil moisture content were highly correlated. It appears that oaks have a higher moisture requirement at the southern aspect, because of stand density related to intraspecific competition.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.3
• /
• pp.83-95
• /
• 2013

To understand natural regeneration and stand development after fire in mixed broadleaved-coniferous forests of Sikhote-Alin Mountains, ten sample plots of $50m{\times}50m$ size were established in 1975 and 1983 at the stands burned by wildfires in 1973 and 1982, respectively. And, the number of naturally regenerated seedlings were monitored in two $50m{\times}4m$ subplots in each plot. The most fire-sensitive conifer species is Abies nephrolepis, while Betula costata is the most fire-sensitive broadleaved tree species. The most fire-resistant species were Q. mongolica, T. taquetii and A. mono. The results of 20 and 30 years after the fire showed that pioneer tree species, e.g. Populus, Salix, and Betula, were regenerated immediately at the early stage of stand development and grew where there is a mono canopy layer with high density. On the other hand, the densities of successors, e.g. Pinus koraiensis, Picea jezoensis, Abies nephrolepis, Acer mono and Tilia taquetii, which were present in the study plots before the fire, increased gradually. Naturally regenerated tree species after forest fire by the growth rate were divided into three groups according to their annual height growth. The seral tree species (Betula costata, Betula platyphylla, Padus maackii, Populus tremula and Sarix caprea) belong to the first group and have the highest growth rate (from 40 to 96 cm per year). The late successional broad-leaved trees (Tilia taquetii, Acer mono and Quercus mongolica) belong to the second group and have intermediate annual height growth (from 3.7 to 13.5 cm per year). The late successional coniferous species (Picea jezoensis, Pinus koraiensis and Abies nephrolepis) form the third group and have the least annual height growth (from 1.4 to 3.5 cm per year).

• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.169-181
• /
• 2011

The purpose of this study was to understand the geographical and environmental distribution of animals and plants in Baekdudaegan region using field survey and GIS data. Crucial factors were selected and analyzed to understand the distributional characteristics of wild animals (16 species in 5 orders) and rare endemic plants (20 species in 12 orders). These crucial factors include stand factor (forest type, DBH class, and crown density), soil factor (bed rock, soil texture, and organic matter), geographical factor (elevation, slope, aspect) and climatic factor (temperature, rain fall, humidity). Finally, ten crucial factors were selected by statistical analysis and categorized for analyzing geographical and environmental features. Three orders such as Rodentia, Carnivora, and Artiodactula in wild animal showed the similar habitat characteristics with the small diameter and the elevation range from 801 to 1,000m. The Hydropotes inermis of Artiodactyla and Rattus norvegicus of Rodentia were different in the type of orders, but they had the similar habitat characteristics with the coniferous forest and loam. On the other hand, four orders such as Tubiflorales, Liliales, Ericales, and Rhamnales in the rare and endemic plants were showed high occurrence rate in the organic matter between 4 and 6%. The Rodgersia podophylla of Rosales and Gastrodia elata Blume of Microspermae were different in the type of orders, but they had the similar habitat characteristics with the stand factor and soil factor.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.757-766
• /
• 2005

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6T Full CMOS SRAM had been continued as the technology advances, However, conventional 6T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6T Full CMOS SRAM is $70{\sim}90F^{2}$, which is too large compared to $8{\sim}9F^{2}$ of DRAM cell. With 80nm design rule using 193nm ArF lithography, the maximum density is 72M bits at the most. Therefore, pseudo SRAM or 1T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed $S^{3}$ cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^{3}$ SRAM cell technology with 100nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.314-321
• /
• 2006

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6 T Full CMOS SRAM had been continued as the technology advances. However, conventional 6 T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6 T Full CMOS SRAM is $70{\sim}90\;F^2$, which is too large compared to $8{\sim}9\;F^2$ of DRAM cell. With 80 nm design rule using 193 nm ArF lithography, the maximum density is 72 Mbits at the most. Therefore, pseudo SRAM or 1 T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64 M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6 T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed S3 cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^3$ SRAM cell technology with 100 nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.

• Korean Journal of Environment and Ecology
• /
• v.2 no.1
• /
• pp.1-8
• /
• 1988

To investigate the forest structure of Guryongsa-Birobong area in Mt. Chiak, four districts were selected and forty-five plots were set up at the districts. The leading dominant species of District I, the valley forest in which users' density was very high. was Pinus densiflora. That of District II, the valley forest in which users' density was high. and Districs III, the valley forest in which entering was restricted recently. was Comus controversa. That of District III, the ridge forest in which users' density high, was Quercus mongolica. Species diversities of District I, II, III, and IV were 1.3252, 1.3736, 14421, and 1.2546, respectively. DCA ordination were showed that successional trends of tree species seem to be from Pinus densiflora through Quercus spp. to Carpinus laxtflora in ridge and midslope forest and from Pinus densiflora through Quercus spp. to Comtus controversa and Carpinus cordata.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.169-178
• /
• 2020

This study aimed to compare the organic carbon stocks of Cryptomeria japonica and Chamaecyparis obtusa stands established under a similar-site environmental condition in South Korea. C. japonica and C. obtusa stands adjacent to each other from 13 representative regions were chosen to evaluate the carbon stocks of tree biomass, forest floor, and mineral soils. Mean stand ages were 45 years for C. japonica and 43 years for C. obtusa, respectively. Tree density was significantly lower in C. japonica (989 tree ha^-1) than in C. obtusa (1,223 tree ha^-1) stands, whereas diameter at breast height and dominant tree height values were significantly higher in C. japonica (27.4 cm and 20.4 m, respectively), compared with C. obtusa (23.9 cm and 17.9 m, respectively) stands. The total carbon stocks of tree biomass were linearly related with stand basal area (C. japonica: r² = 0.82; C. obtusa: r²= 0.92; P< 0.05), whereas stand density and site index were not correlated with the carbon stocks of tree biomass (P > 0.05). The carbon stocks of aboveground tree biomass were significantly higher in C. obtusa (117.7 Mg C ha^-1), compared with C. japonica (95.5 Mg C ha^-1) stands, whereas carbon concentration and stocks of the forest floor and mineral soil layers were insignificantly different between the C. japonica and C. obtusa stands. The results indicated that trees in C. obtusa stands sequestrated more carbon dioxide, compared with C. japonica stands, whereas carbon stocks in the forest floor and mineral soil layers were unaffected by stand development processes of the different tree species.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.34-43
• /
• 1996

We investigated the vegetation structure, and effects of canopy degree(gap or purlieu to 25%, 50%, 75%, over 75%) of the overstory on seedling regeneration and survivorship, and sapling density, growth and growth type of Abies koreana in subalpine of Mt. Chiri. The stem density in Abies koreana stand was higher in middle story than upper story, individual trees in upper story occupied larger area and were more apart, resulted in uniform distribution. The regeneration and survivorship of seedlings and saplings were best in 25% of crown closure, in order of 50%, gap, but lowest in over 75% of crown closure. The annual growth rate and recent 5 years growth rate of saplings were highest in gap or purlieu and getting lower toward gradually higher coverage of overstory. And 10- to 20-Year-old saplings were mainly regenerated in stands with lower density(I or II), but most of 20 to 30 years old saplings were growing in stands with higher density (III or IV). The number of "A" type saplings grown normally in gap or purlieu was gradually decreased in stand with higher density but the number of "D" or "E" types of which growth was supressed or prohibited by the high density was abruptly increased. Saplings normally growing in the gap and purlieu showed the panicle type, but those grown under dense crown were greatly suppressed and showed the umbellate type.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.380-387
• /
• 2017

This study was carried out to determine fertilization effects on allometric equations and biomass production in a Moso bamboo (Phllostachys pubescens) stand of the Gajwa National Experimental Forests, Jinju, Korea. The study site was fertilized for approximately 30 years to produce edible bamboo shoots. Total 20 bamboos (10 fertilized and 10 unfertilized) were cut to develop allometric equations and to estimate biomass accumulation of each bamboo component. Allometric equations of each bamboo component in the fertilized and unfertilized plots were significant (P < 0.05) with diameter at 20 cm from ground ($D_{20}$), diameter at breast height (DBH), culm height (H), and $DBH^2{\cdot}H$. Aboveground biomass estimated by the allometric equations (DBH) was significantly higher in the unfertilized plots ($106.38Mg\;ha^{-1}$) in culm density of $6,833culm\;ha^{-1}$ than in the fertilized ($57.68Mg\;ha^{-1}$) plots in culm density of $4,633culm\;ha^{-1}$. The proportion of each biomass component was culm (79%), followed by branches (14%) and leaf (7%) in the fertilized plots, whereas it was culm (81%), followed by branches (13%), and leaf (6%) in the unfertilized plots. The results indicate that aboveground biomass accumulation in a Phllostachys pubescens stand was little affected by fertilizer application because of the difference of culm density.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3860-3871
• /
• 1975

This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.