• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.60-66
• /
• 2007

Separation control has been performed using synthetic jets on airfoil at high angle of attack. Computed results demonstrated that stall characteristics and control surface performance could be substantially improved by resizing separation vortices. It was observed that the actual flow control mechanism and flow structure is fundamentally different depending on the range of synthetic jet frequency. For low frequency range, small vortices due to synthetic jet penetrated to the large leading edge separation vortex, and as a result, the size of the leading edge vortex was remarkably reduced. For high frequency range, however, small vortex did not grow up enough to penetrate into the leading edge separation vortex. Instead, synthetic jet firmly attached the local flow and influenced the circulation of the virtual airfoil shape which is the combined shape of the main airfoil with the separation vortex. Theses results show the characteristic of unsteady flow of single synthetic jet. Beside, we researched on multi-array synthetic jet to obtain applicable synthetic jet velocity. Multi-location synthetic jet is proposed to eliminate small vortex on suction surface of airfoil. With the results, we concluded that the flow around airfoil is stable by high frequency synthetic jet with elimination of small vortex and confirmation of stable flow. Moreover, performance of multi-array/multi-location synthetic jet can be improved by changing phase angle of multi-location synthetic jet.

• 한국항공우주학회지
• /
• 제34권7호
• /
• pp.105-111
• /
• 2006

항공기 엔진은 항공기가 각종 기동을 수행하도록 추력을 발생하는 것 외에 기동 수행을 위해 작동되는 조종면에 공급될 유압계통의 동력과 각종 항전장비 작동을 위한 전기계통의 동력을 공급한다. 엔진으로부터 제공되는 동력은 엔진의 고압압축기로부터 추출되기 때문에 축마력(Horsepower Extraction, HPX)이라하며, 추출되어 제공되는 엔진 축마력이 유압계통과 전기계통에서 요구하는 요구 축마력보다 작게 되면 엔진에 과도한 부하가 걸려 엔진회전수 감소(Rollback) 및 심한 경우 실속(stall)등이 발생할 수 있다. T/A-50체계개발 동안 요구 축마력과 엔진의 공급 축마력에 대한 비교 해석을 수행하였고, 해석 결과 엔진 축마력이 요구 축마력보다 작은 것을 확인하였다. 엔진 축마력 증가를 위한 엔진 제어 스케쥴 변경이 수행되었으며, 변경된 제어 스케쥴이 장착된 엔진을 이용하여 T/A-50비행시험을 수행하였다. 비행시험 결과를 통해 해석 결과 및 변경된 제어 스케쥴의 타당성을 검증하였다.

• 한국콘텐츠학회논문지
• /
• 제19권11호
• /
• pp.365-374
• /
• 2019

항공운항사고율은 항공기 비정상 자세(Upset)로 인한 조종능력상실(LOC-­I: Loss of Control in Flight)이 가장 높아 ICAO(International Civil Aviation Organization: 국제민간항공기구)는 TEM(Threat and Error Management)을 활용하여 비정상자세 예방 및 회복훈련(UPRT: Upset Prevention & Recovery Training)을 하도록 권고하였다. 그러나 전 세계적으로 항공기 비정상 자세에 관한 TEM 요인 연구가 많이 도출되지 않은 관계로 항공사들이 실질적인 TEM 훈련에 참고할 자료가 많지 않은 실정이다. 본 연구의 목적은 UPRT의 소개와 항공기 비정상 자세로 인한 대표적 사고 3건을 ICAO에서 권고하는 TEM으로 분류하여 핵심요소인 위협과 에러, 불안전항공기 상태의 공통요인을 도출하여 살펴보는 것이다. 본 논문에서 대표적인 비정상자세 사고를 TEM을 활용하여 분류한 결과 공통위협으로는 야간비행/IFR, 자동화 놀람, 부적절한 훈련과 미숙련 부기장 편조로 나타났다. 공통 에러로는 부적절한 엔진 추력, 절차적용오류, 조종, 속도이탈 및 고도 이탈, 의사소통실패, 항공기 이상자세, 복창실패, 크로스 체크 실패 등으로 나타났으며, 불안전항공기 상태로는 부적절한 자동화 모드, 저속이탈, 수직 이탈, 부정확한 엔진 추력 등으로 실속하여 추락한 것으로 나타났다. 또한 공통요인으로부터 개선방향을 도출하여 본 연구는 시작단계에 있는 TEM활용 Upset 향상 방안을 제시하고자 한다.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.809-815
• /
• 2009

The previous work(Cheong et al., 2006) where the characteristics of acoustic emissions of wind turbines has been investigated according to the methods of power regulation, has showed that the acoustic power of wind turbine using the stall control for power regulation is more correlated with the wind speed than that using the pitch control. In this paper, basically extending this work, the noise generation characteristics of large modern upwind wind turbines are experimentally indentified according to the power regulation methods. To investigate the noise generation mechanisms, the distribution of noise sources in the rotor plane is measured by using the beam-forming measurement system(B&K 7768, 7752, WA0890) consisting of 48 microphones. The array results for the 660 kW wind turbine show that all noise is produced during the downward movement of the blades. This result show good agreement with the theoretical result using the empirical formula with the parameters: the convective amplification; trailing edge noise directivity; flow-speed dependence. This agreement implies that the trailing edge noise is dominant over the whole frequency range of the noise from the 660 kW wind turbine using the pitch control for power regulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.63-67
• /
• 2009

The previous work (Cheong et al., 2006) where the characteristics of acoustic emissions of wind turbines has been investigated according to the methods of power regulation, has showed that the acoustic power of wind turbine using the stall control for power regulation is more correlated with the wind speed than that using the pitch control. In this paper, basically extending this work, the noise generation characteristics of large modern upwind wind turbines are experimentally indentified according to the power regulation methods. To investigate the noise generation mechanisms, the distribution of noise sources in the rotor plane is measured by using the Beam-forming measurement system (B&K 7768, 7752, WA0890) consisting of 48 microphones. The array results for the 660 kW wind turbine show that all noise is produced during the downward movement of the blades. This result show good agreement with the theoretical result using the empirical formula with the parameters: the convective amplification; trailing edge noise directivity; flow-speed dependence. This agreement implies that the trailing edge noise is dominant over the whole frequency range of the noise from the 660 kW wind turbine using the pitch control for power regulation.

• 한국항행학회논문지
• /
• 제10권4호
• /
• pp.319-326
• /
• 2006

본 논문에서는 연료 유량만을 제어 입력으로 하는 터보제트 엔진 제어기를 제안한다. 퍼지 기반 제어기는 무인 항공기의 가감속시 서지와 flame-out 현상이 발생되지 않도록 효율적으로 제어 입력을 생성하며, 항공기 기동시 빠른 가감속 특성을 보이며, 동작점이 서지라인과 flame-out라인 사이에 존재하도록 설계되었다. 엔진 회전 속도와 서지 여유가 퍼지 입력 변수가 되고, 신속하고 안전하게 항공기가 원하는 회전속도로 수렴할 수 있도록 제어기를 설계한다. 제안된 제어기의 성능확인을 위해 MATLAB을 사용한 컴퓨터 시뮬레이션을 수행하였으며, DYGABCD 프로그램을 사용하여 생성된 선형 엔진 모델에 적용하여 성능을 입증하였다.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.755-762
• /
• 2005

To evaluate the aerodynamic efficiency of TR-S2 configuration designed by SUDC, wind tunnel tests of $40\%$ scaled model were done in KARI LSWT. The aerodynamic characteristics of plain and Semi-Slotted Flaperon were compared, and vortex generators were installed to improve flow pattern along the wing surface. Effects of the control surface such as elevator, rudder, aileron, and incidence angle of horizontal tail are measured for various testing conditions. Test results showed that Semi-Slotted Flaperon produced more favorable lift, lift/drag, and stall margins and application of vortex generator would be best choice to enhance wing performance. Longitudinal, lateral and directional characteristics of TR-S2 were found to be stable for the pitch and yaw motions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.879-885
• /
• 2000

This study is carried out to make clear the reason of occurrence of sudden acceleration incident of AT vehicle. The stepping motor is used to control the engine speed at idle by compensating the volume of air. By the way it's valve is contaminated by blow-by gas, deposit and back fire etc. This contamination could occur the load of motor at low temperature. This plays an important role in damaging the motor's coil with the motor's performance interfered. If it's coil is damaged the ISC could malfunction. If these phenomena occur, the speed of engine may increase or the engine may stall with hunting.

• 한국항공운항학회지
• /
• 제15권3호
• /
• pp.33-45
• /
• 2007

The collision avoidance maneuver flight simulation for tilt rotor unmanned aerial vehicle was performed by time-accurate numerical integration method based on wind tunnel test data. Five representative collision avoidance maneuvers were simulated under constraints of aerodynamic stall, propulsion power, structural load, and control actuator capability. The collision avoidance performances of the maneuvers were compared by the computed collision avoidance times. The sensitivities of initial flight speed and collision zone shape on the collision avoidance time were investigated. From these results, it was found that the moderate pull-up turn maneuver defined using moderate pitch and maximum roll controls within simulation constraints is the most robust and efficient collision avoidance maneuver under the various flight speeds and collision object shapes in the tilt rotor UAV applications.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2028-2037
• /
• 2009

This paper presents the simulator for dynamic modeling of a MT(micro turbine) during start-up period. The simulator is implemented by modeling a dynamic power of main components of a MT including compressor, combustor and turbine. A modeling for a MT under steady state operation can be accurately built from thermodynamics analysis. But dynamic modeling during start-up period is very difficult because efficiency of main components is very low and the designed value has big error and nonlinear characteristics during start-up. In this paper, new method without using thermodynamics analysis during start-up is proposed for the simulator. The power models of main components are derived from analysis of the experimental operation data by test motoring using a electric starter under constant power output. The simulator is developed using MATLAB/Simulink. For constant power output control, sensorless vector inverter is designed and algorithms for starting from stall and method for controling a output power are proposed. The performance of developed simulator is verified by comparing experimental and simulation start-up results.