• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1983년도 추계학술발표회논문집
• /
• pp.35-38
• /
• 1983

It is described a novel SAW oscillator which can be varriable its frequenis by using two output IDT. The results show that frequencies staility is good and variable frequencies range can be broaden by design of IDT.

• 한국유체기계학회 논문집
• /
• 제15권2호
• /
• pp.36-40
• /
• 2012

Pitch control of wind turbine is activated above rated wind speed for the purpose of rated power regulation. When we design pitch controller, its gain-scheduling is essential due to nonlinear characteristics of aerodynamic torque. In this study, 2-mass model including a vibration mode of drive-train for a 2 MW wind turbine is considered and pitch control with gain-scheduling using a linearization analysis of the nonlinear aerodynamic torque is applied. Some simulation results for the pitch gain-scheduling under step wind speed are presented and investigated. It is shown that gain-scheduling in pitch control is important especially in the region of high wind speeds when there exists a vibration mode of drive-train.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.25-29
• /
• 1999

The purpose of this paper is to find the magnetic filed distribution inside the motor in order to find out if the high-Tc superconducting tapes operate stably in actual motor operation in a detailed model of the actual motor was analyzed through F.E.M.(finite Element Method). As a result, it has been proved that the high-Tc superconducting tapes can with-stand 4 A of current with staility. 4 A was the amount of current with stability. 4 A was the amount of current needed to achieve 600 A·turns which is required by the previous simulation aimed at developing this the flux damper reduces armature reactance during the motor operation. But it was observed that the flux damper generates loss by means of leakage flux and this decreases the output of the motor by about 5%.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.61-69
• /
• 1999

A dynamic stability test was performed to determine dynamic stability derivatives for the pure pitching motion of air-to-ground missile model in the low speed wind tunnel. The free vibration technique was employed to acquire oscillation characteristics of the model for damping coefficients. Damping coefficients are obtained by the method of logarithmic decrement. Results show good damping effects and stability capability at Mach numbers 0.1 and 0.2, with the angle of attack ranging from -15 to +20 degrees.

• Design & Manufacturing
• /
• 제9권3호
• /
• pp.19-23
• /
• 2015

Non-pneumatic wheels have been widely used instead of general tube type wheels beause of many reasons, for example, wheel size, price restriction, heavy-duty problem and so on. Almost small size wheels or casters were non-pneumatic type but structural stability was not certified. This paper presents a double structured non-pneumatic wheel, called "smart caster", which consisted with inner and outer wheels connected by chips, and finite element analysis processes were conducted in order to determine important dwsign factors before actual design for mass production. For structural analysis ABAQUS was used under various boundary conditions with incrementally varied loads until 2,000N. Then structural staility was evaluated according to varied loads below ultimate stress. Generally stresses were concentrated at the lower parts of the wheel, and especially contact parts between wheel and ground. In addition, maximum stress appeared at contact parts between the wheel lower part and chips.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.41-56
• /
• 1994

지하수위 하에서 터널이 시공될 경우, 터널막장은 시공 중 용수에 의한 영향을 받게 되며 지보 System은 시공 후 지하수 흐름이 문제시 될 수 있다. 븐 연구는 터널막장 및 라이닝에 대해 배수조건에 따른 지하수 흐름을 고려한 적절한 해석 및 설계방법을 제시하고 있다. 첫째, 시공 완료 후 터널 라이닝이 배수조건에 따라 받게 되는 지하수의 영향을 라이닝에 작용하는 응력 및 변위로써 검토하고 각 배수조건별로 적절한 해석 및 설계방법을 제안하였다. 둘째, 시공 중 굴착에 의한 지하수의 흐름이 문제가 되는 터널막장에 대해서 지하수 흐름의 3 차원 모델링을 수행하였으며, 그 결과를 막장의 안정성에 대한 이론적 검토에 반영하여 침투력이 막장의 안정성 미치는 영향에 대하여 검토하였다. 또한 막장을 평면변형률조건(plane strain condition)으로 모델링 하여 침투 고려시와 지하수의 미고려시에 막장면에 작용하는 응력 및 변위를 산출하여 침투력이 막장면에 미치는 영향을 검토하였다. 연구 결과, 터널 시공시 지하굴착 및 배수에 의한 지하수위 저하가 크지 않은 구간에서 터널막 장은 정상류 흐름에 의한 침투력을 고려한 적절한 안정대책이 요구되며, 터널 라이닝 또한 침투를 고려한 배수개념이나 내부 라이닝이 정수압을 견뎌야 하는 비배수 개념에 의해 설계 및 시공이 이루어져야 함을 보여준다.