• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.1061-1073
• /
• 1996

Vortex tube is a simple device which splits a compressed gas stream into a cold stream and a hot stream without any chemical reactions. The phenomena of energy separation taking place in a vortex tube has been investigated experimentally. Recently, vortex tube is widely used to local cooler of industrial equipments and air conditioner of special purpose. In this study, experimental study on vortex tube efficiency was performed with various cold end orifices and nozzles type. The experimental results indicate that there is an optimum diameter of cold end orifice and nozzle type for the best cooling performance. The variation of the maximum wall temperature along the vortex tube surface provides useful information about the location of the stagnation point of the flow field at the axis of the vortex tube. The similarity relation for the prediction of the temperature of the cold exit air was obtained.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.691-699
• /
• 1997

The effects of concave hemispherical surface curvature on the local heat transfer from a turbulent round impinging jet were experimentally investigated. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds number ranges from Re=11,000 to 50,000, the nozzle-to- surface distance from L/d=2 to 10, and the surface curvature from D/d=6 to 12.The present results are also compared to those for the flat plate case. In the experiment, the local Nusselt numbers tend to increase in all regions with an increasing surface curvature. The maximum Nusselt number for all Reynolds numbers occurred at L/d .ident. 6 and a second maximum in the Nusselt number occurred at R/d .ident. 2 for both Re=23,000 and Re=50,000 in the case of L/d=2 and for Re=50,000 only in the case of L/d=4. Meanwhile, as the surface curvature increases, the value of the secondary maximum Nusselt number decreases. All the other cases exhibit monotonically decreasing values of the Nusselt number along the curved surface. The stagnation point Nusselt numbers are well correlated with Re, L/d, and D/d.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.350-356
• /
• 1988

The impinging air jet system is still being used in the various fields with its inherent merits, that is, the easiness in engineering application and high heat transfer coefficients at stagnation point. The purpose of this study is augmentation of heat transfer without additional power in the rectangular air jet which impinges vertically to the heating surface. As a method of passive heat transfer augmentation in a two-Dimensional impinging jet, the transverse-repeated surface roughness of square cross-section is used. This paper deals with the experimental study on the characteristics of heat transfer at the x-direction in between nozzle exit and heating surface of flat plate, and that of ribbed plate. And this study also investigates the effect of square rib widths. The integral average heat transfer coefficient of ribbed plate is about 2.2 times larger than that of flat plate.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.668-679
• /
• 2018

Experimental and numerical data were compared through a counterflow burner for the characteristic of basic flame about SNG- C11. In order to use the numerical mechanism accurately, the validation was carried out at strain rate ($a_g=30$, $120s^{-1}$) and the UCSD model showed satisfactory results. The effective Lewis number of the extinction boundary, and the behavior of extinction for the symmetric flames of the SNG-C11, could be explained through the trend of $Le_V$, and the flame of the extinction condition was inspected by the major species, key radicals and the chemical reaction paths. The interactions phenomenon in the merged flames has chemical reaction path for producing $HO_2$ were generated at stagnation point. It can be expected the one of major factors in interaction phenomenon.

• 한국습지학회지
• /
• 제14권1호
• /
• pp.75-87
• /
• 2012

지표수-지하수 혼합대는 하천 및 호소 등에서 지표수와 지하수가 교환되는 공간이다. 지표수-지하수 혼합은 하상의 토층으로 확장되어 다양한 물리적, 생지화화적, 열역학적 교환을 발생시키며 수생태계 내 고유한 생태적 전이대를 형성하는데 주요한 역할을 한다. 과거 실험 및 수치모의 연구에 의하면 혼합대에서 발생하는 물질교환은 하천의 지형적인 특징으로 발생하는 압력분포에 의해 지배된다. 특히 하천의 구간 규모에서 여울-소 구조는 혼합대의 특성을 지배하는 주요 인자로 알려져 있다. 여울-소 연속 구조는 지표수에서 재순환영역과 정체점을 형성하며 이 독특한 흐름 구조에 의해 혼합대의 흐름특성이 영향을 받는다. 본 연구에서는 3차원 동수역학 모형을 이용하여 Reynolds-averaged Navier-Stokes 방정식과 Darcy 방정식을 동시에 해석하여 연속된 여울-소 구조에서 발생하는 지표수의 흐름구조가 혼합대의 흐름에 미치는 영향을 분석하였다. 모의 결과, 여울-소 구조에서 지표수의 재순환영역 및 정체점은 상승류와 하강류 형성과 직접적 연관을 가지며, 재순환영역의 크기가 감소하면 여울 전면부 하강류 형성 구간의 길이가 감소하고 최대 하강류 발생 지점이 하부로 이동하는 특성을 파악하였다. 이와 같은 본 연구의 결과는 혼합대의 현장관측, 하천 관리 및 복원 등의 연구에 활용하여 친환경 하천 조성에 기여할 수 있을 것으로 판단된다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.

• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1146-1153
• /
• 2005

This study was investigated so that reliability of disease mechanism diagnosis would be examined, the estimation about disease mechanism item of Questionnaires and the relations of disease mechanism would be inquired about 'health diagnosis program' Questionnaires which were used for the object diagnosis of Oriental medicine in the department of Oriental OB&GY, Oriental Medical hospital of Dong-Eui University. We analyzed the results of Questionnaires for 3354 outpatients who had OB & GY disease in the Oriental Medical hospital of Dong-Eui University from April 2000 to March 2004. The diagnosis Questionnaires(after DSOM (r) S.1.1) was the figures 188, the health diagnosis Questionnaires (after DSOM (r) S.1.1) was the figures 137. phiegm deficiency of qi was used in DSOM (r) R.1.1 as it is. The reliability of DSOM (r) S.1.1 was usually higher than DSOM (r) R.1.1 in deficiency of qi blood stasis insufficiency of Yang heat syndrom damp, 5 case disease mechanism. The reliability of DSOM (r) S.1.1 was usually lower than DSOM (r) R.1.1 in blood deficiency stagnation of qi coldness damp dryness liver heart spleen kidney, 8 case disease mechanism. but the great difference wasn't seen, therefore both DSOM (r) S.1.1 and DSOM (r) R.1.1 had similar result. A meeting point both DSOM (r) S.1.1 and DSOM (r) R.1.1 was above 90% in liver spleen blood stasis blood deficiency, 4 case disease mechanism with the exception of phlegm deficiency of Yim nothing of fluctuations of question. A meeting point of coldness that was 82.47% was lowest, A meeting point of the rest disease mechanism was above 85%. The effect that contributed in producing disease mechanism result and in which pure question was over relevance calculation 0.9, insufficiency of Yang damp phlegm that contributed in producing disease mechanism result was lower comparatively in DSOM (r) R.1.1. But the effect that contributed in producing disease mechanism result and in which pure question was over relevance calculation 0.9 except spleen kidney phlegm in DSOM (r) S.1.1

• 대한본초학회지
• /
• 제31권2호
• /
• pp.7-12
• /
• 2016

Objectives : Secondary amenorrhoea is the absence of menses for three months in a woman with previously normal menstruation or nine months for women with a history of oligomenorrhoea. It can be caused by stress, extreme weight loss, and excessive exercise. The purpose of this study was to report the clinical effects of herbal medicine on secondary amenorrhoea.Methods : We employed oriental medical treatments; herbal - medication (Hyunburikyungtang gamibang), acupuncture and moxibustion. We treated the patients one or two times a month with oriental therapy method. They took medicine three times a day after a meal. During taking medicine, we let the patients avoid fatty food, flour based food and alcohol. We evaluated the status of the patient, on the basis of the state of menstration and F2 level of Yangdorak. Because we diagnosed the condition of patients with the pattern of liver depression and qi stagnation, so F2 level of Yangdorak was an important point of the diagnosis. Yangdorak machine was Tormeter Iw - zen at Towatech Co.,Ltd.Results : After taking treatment - several times acupuncture and moxibustion during some period and taking herbal-medicine, they had menstrain naturally without taking any hormone drug. Also the amount of menstration has gradually increased. The F2 level of Yangdorak returned to normal range. The feeling of cold on hands, feet and lower abdomen was much improved.Conclusions : Herbal medicine (Hyunburikyungtang gamibang) with oriental medical treatments, acupuncture and moxibustion was effective in the treatment of secondary amenorrhoea.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.645-652
• /
• 1994

The leading edge of a turbine blade was simulated as a circular cylindrical surface. The effect of free-stream turbulence on the mass transfer upstream of the injectionhole has been investigated experimentally. The effects of injection location, blowing ratio on the Sherwood number distribution were examined as well. The mass transfer coefficients were measured by a naphthalene sublimation technique. The free-stream Reynolds number based on the cylinder diameter is 53,000. Other conditions investigated are: free-stream turbulence intensities of 3.9% and 8.0%, injection locations of $40^{\circ}$, $50^{\circ}$, and $60^{\circ}$ from the front stagnation point of the cylinder, and blowing ratios of 0.5 and 1.0. The role of the horseshoe vortex formed upstream edge of the injected jet is dicussed in detail. When the blowing ratio is unity, and the coolant jet is injected at $40^{\circ}$, the mass transfer upstream of the jet is not affected by the coolant jet at all. On the other hand, when the injection hole is located beyond $50^{\circ}$, the mass transfer upstream edge of the injection hole suddenly increases due to the formation of the horseshoe vortex, but it dereases as the free-stream turbulence intensity increases because the strength of the horseshoe vortex structure becomes weakened. The role of the horseshoe vortex is clearly evidenced by placing a rigid rod at the injection hole instead of issuing the jet. In the case of the rigid rod, the spanwise Sherwood number upstream of the injection hole is much larger due to the intense influence of the horseshoe vortex.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2132-2146
• /
• 1991

본 연구에서는 기존 유속계에 의한 측정이 어려운 점을 감안하여 나프탈렌 승 화법을 이용하여 열교환기 시스템의 한 모델인 원봉에 유한한 길이의 환상핀이 부착된 경우 환상핀과 원봉이 만나는 부분에서 와류들 특히 V2, V3등 구석와류가 물질전달을 증가시키는 구조에 대해 고찰한다. 이는 원봉 주위의 환상핀에 의한 대류 물질전달 에 영향을 줄수 있는 레이놀즈수, 환상핀의 크기에 따른 형상비, 그리고 경계층 두께, 배제 두께 등의 유동변수를 변화시켜 가며 물질전달률과의 관계를 규명하여 열교환기 설계의 기본자료를 제공한다. 또한 환상핀 사이의 원봉표면에 대한 전체물질전달률 을 측정하며, 환상핀에 인접한 곳에서 구석와류에 대한 환상핀의 끝 벽면 영향을 알아 보고 이를 근거로 하여 말굽와류의 3차원 박리 유동구조를 정성적으로 규명하고자 한 다.