• Structural Engineering and Mechanics
• /
• v.62 no.2
• /
• pp.209-224
• /
• 2017

Elevated water tanks are considered as important structures due to its post-earthquake requirements. Elevated water tank on reinforced concrete frame staging is widely used in India. Different response reduction factors depending on ductility of frame members are used in seismic design of frame staging. The study on appropriateness of response reduction factor for reinforced concrete tank staging is sparse in literature. In the present paper a systematic study on estimation of key components of response reduction factors is presented. By considering the various combinations of tank capacity, height of staging, seismic design level and design response reduction factors, forty-eight analytical models are developed and designed using relevant Indian codes. The minimum specified design cross section of column as per Indian code is found to be sufficient to accommodate the design steel. The strength factor and ductility factor are estimated using results of nonlinear static pushover analysis. It was observed that for seismic design category 'high' the strength factor has lesser contribution than ductility factor, whereas, opposite trend is observed for seismic design category 'low'. Further, the effects of staging height and tank capacity on strength and ductility factors for two different seismic design categories are studied. For both seismic design categories, the response reduction factors obtained from the nonlinear static analysis is higher than the code specified response reduction factors. The minimum dimension restriction of column is observed as key parameter in achieving the desired performance of the elevated water tank on frame staging.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.1
• /
• pp.32-38
• /
• 2003

Staged combustion, such as air- and fuel-staging, is a relatively well-known technique fur reduction of NOx emission and used in combination with other techniques nowadays. However, the design variables are still selected depending upon operating conditions. There are many variables tested to investigate the NOx emission characteristics fur changing of fuel or air velocity, swirl intensity, and staging ratio of air and fuel in multi-staged burner. In air-staging case, the fuel-rich condition of the primary combustion zone is very helpful to reduce NOx emission and its range is known to be restricted by the increase of carbon monoxide. However, in many cases carbon monoxide level is not too high to be restricted operating condition. So we tried to expand the equivalence ratio range to the richer condition in the primary combustion zone and certificate the function of each burner component and its contribution to the overall NOx production.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.587-601
• /
• 2018

Elevated water tanks are inverted pendulum type structures where drift limit is an important criterion for seismic design and performance evaluation. Explicit drift criteria for elevated water tanks are not available in the literature. In this study, probabilistic approach is used to determine maximum drift limit for damage state of yielding and damage state of collapse for the elevated water tanks supported on RC frame staging. The two damage states are defined using results of incremental dynamic analysis wherein a total of 2160 nonlinear time history analyses are performed using twelve artificial spectrum compatible ground motions. Analytical fragility curves are developed using two-parameter lognormal distribution. The maximum allowable drifts corresponding to yield and collapse level requirements are estimated for different tank capacities. Finally, a single fragility curve is developed which provides maximum drift values for the different probability of damage. Further, for rational consideration of the uncertainties in design, three confidence levels are selected and corresponding drift limits for damage states of yielding and collapse are proposed. These values of maximum drift can be used in performance-based seismic design for a particular damage state depending on the level of confidence.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1616-1623
• /
• 2001

A basic experimental study has been carried out to find out the design parameters of fuel 2-staging atomizers in order to reduce nitrogen oxides(NOx) rate emitted from the steam boilers used the liquid fuel. The heavy fuel oil(B-Coil) and fuel 2-staging Y-jet twin-fluid atomizers were adopted in this study. The results of this paper were obtained from the real as well as the model scale atomizers. In the case of model atomizers test, NOx reduction rate was strongly dependent on the staged fuel rate, but it was weakly dependent on the injection hole arrangement and air swirl conditions. The real scale atomizers was designed and manufactured on the base of these test results, and those was mounted and operated in the real boiler generates 185 ton steam per an hour. The reduction rate of the model and real plant was reached 10∼30% of base NOx by atomizers. but dust was sharply increased in the low O$_2$combustion region of the real plant.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.167-171
• /
• 2001

Air-staging combustion is a relatively well-known technique to reduce NOx emission and used in combination with other techniques nowadays. However, the design variables are still selected depending upon operating circumstances. Though the fuel-rich condition of the primary combustion zone is very helpful to NOx reduction, its range is known to be restricted by the increase of carbon monoxide. However, in many cases carbon monoxide level is so low not to be the restriction at all. So we tried to expand the equivalence ratio range to the richer condition in the primary combustion zone and make the function of each burner component and its contribution to the overall NOx production clear.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.155-166
• /
• 2021

In this paper, design study of a small two-stage launch vehicle is undertaken for the dedicated launch of the Compact Advanced Satellite 500 (CAS500)-class satellite into the Low Earth Orbit (LEO) by modifying the second and third stages of the Korean Space Launch Vehicle II (KSLV-II). Since the KSLV-II has three stages, velocity increment is newly distributed for the two-stage small launch vehicle. For this end, the staging design is carried out for the design parameters such as stage mass ratios, structural coefficients and engine options for each stage followed by trajectory analysis. Investigation of the results provides the combination of design parameters for the small launch vehicle for the dedicated launch of 500 kg-class satellite into LEO.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3009-3013
• /
• 2012

Background: The clinical course of individual chronic lymphocytic leukemia (CLL) is highly variable and clinical staging systems do not help us to predict if and at what rate there will be disease progression in an individual patient diagnosed with early stage disease. Recently, several important observations related to other prognostic factors including lymphocyte doubling time (LDT), ${\beta}_2$-microglobulin (${\beta}_2$-MG), and percent of smudge cell in peripheral blood smears, cytogenetic and molecular analysis have been made. The aim of this study was to evaluate a range of prognostic factors in our CLL patients. Design and methods: Seventy patients with CLL were enrolled. Prognostic factors of disease including Binet staging, LDT, ${\beta}_2$-MG, ESR, LDH, percent of smudge cell in peripheral blood smear, absolute lymphocyte count, and conventional cytogenetic (CC) analysis were evaluated at diagnosis, and the patients were followed up to determine their outcome. We compared factors with each other and with Binet staging and prognosis. Results: Enrolled patients aged 37-85 years at diagnosis or during follow up. There was no relationship between serum LDH level (P=0.3), ESR (P=0.11), percent of smudge cells in peripheral blood smear (P=0.94), and absolute lymphocyte count (P=0.18) with the stage of disease and prognosis, but the ${\beta}_2$ macroglobulin level (p<0.0001), LDT (p<0.001) had direct and significant relation with staging and outcome. In 19% of patients cytogenetic alteration were seen. Conclusion: The detection of cytogenetic alteration only using the CC method is not sufficient and we need to use FISH, but because FISH study is an expensive method not available in all areas, instead we believe that ${\beta}_2$ MG can be applied in its place as a good prognostic factor for CLL at diagnosis and during follow up. We suggest to add it to Binet staging for prognostic subgrouping of CLL.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.277-285
• /
• 2022

There has been significant increase in demand of launch opportunities from the small satellite sector that represents the new space era. Providing smallsat-dedicated launch service at an affordable price is a new business model many startup companies have pursued, which requires innovative solutions for cost reduction in combination of low cost components, volume production and optimized manufacturing. We set out a preceding study at KARI to develop a suite of critical and cost-cutting technologies in preparation for a two-staged small launch vehicle development, based on the liquid rocket engine technologies developed from the Nuri program in accordance with the 3^rd master plan for national space development. In this work, we introduce the concept of a two-staged small launch vehicle that aims to be innovative and cost competitive for small satellites, and describe mission design results including staging as well as overall vehicle configuration of the launch vehicle.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.373-380
• /
• 2019

In this study, I examined the visual elements for narrative structure and the symbols, scene components and visual styles in the images through analyze the flat staging in Tomm Moore's animated feature film, . As a research method, I figure out the general theories about staging and analyze extracted scenes which revealed flat staging in the , then summarize and clarify the flat staging production elements and features of Tomm Moore. As a result, in , the composition of the screen using the basic shapes, the screen composition containing the spiral which is symbol of the Celtic traditional pattern, the stable and flat frame expression through the balanced screen composition, expression of spatial sensation using perspective, appearance of the period by using the inverted perspective, and composition that can emphasize the flat formability are appeared as a characteristic. Through this, the two-dimensional planarity was maximized to convey the feeling of appreciating the illustrations of fairy tales. Tomm Moore, who produced animation based on folk tales in order to inherit the traditional culture of Ireland, has been attracting worldwide attention because of its flat staging to help narrative, enhancing the original expression and performance of animation. I hope that this study will be used as basic data for industry workers and researchers who make unique and excellent animated feature film.

• Journal of Periodontal and Implant Science
• /
• v.53 no.1
• /
• pp.38-53
• /
• 2023

Purpose: The current Classification of Periodontal and Peri-Implant Diseases and Conditions, published and disseminated in 2018, involves some difficulties and causes diagnostic conflicts due to its criteria, especially for inexperienced clinicians. The aim of this study was to design a decision system based on machine learning algorithms by using clinical measurements and radiographic images in order to determine and facilitate the staging and grading of periodontitis. Methods: In the first part of this study, machine learning models were created using the Python programming language based on clinical data from 144 individuals who presented to the Department of Periodontology, Faculty of Dentistry, Süleyman Demirel University. In the second part, panoramic radiographic images were processed and classification was carried out with deep learning algorithms. Results: Using clinical data, the accuracy of staging with the tree algorithm reached 97.2%, while the random forest and k-nearest neighbor algorithms reached 98.6% accuracy. The best staging accuracy for processing panoramic radiographic images was provided by a hybrid network model algorithm combining the proposed ResNet50 architecture and the support vector machine algorithm. For this, the images were preprocessed, and high success was obtained, with a classification accuracy of 88.2% for staging. However, in general, it was observed that the radiographic images provided a low level of success, in terms of accuracy, for modeling the grading of periodontitis. Conclusions: The machine learning-based decision system presented herein can facilitate periodontal diagnoses despite its current limitations. Further studies are planned to optimize the algorithm and improve the results.