• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.253-258
• /
• 1998

Staggered nested designs are the most popular class of unbalanced nested designs in practical fields. The most important features of the staggered nested design are that it has a very simple open-ended structure and each sum of squares in the analysis of variance has almost the same degrees of freedom. Based on the features, a class of unbalanced nested designs which is generalized of the staggered nested design is proposed. Some of the generalized staggered nested designs are shown to be more efficient than the staggered nested design in estimating some of variance components and their linear combinations.

• Tribology and Lubricants
• /
• 제23권2호
• /
• pp.43-48
• /
• 2007

Leakage reduction through annular type labyrinth seals of steam turbine is necessary for enhancing their efficiency. In this study, modified geometry of the original combination-type-staggered-labyrinth seal has been suggested and numerical analysis for leakage prediction has been carried out for the modified-combination-type-staggered-labyrinth seal both based on bulk-flow model and using the CFD code FLUENT. The theoretical analysis based on bulk-flow model yields leakage reduction of the modified combination type staggered labyrinth seal by about 11%. Comparing with the result of Bulk-flow model analysis, the leakage result of CFD analysis shows reasonable agreement within 9.8% error.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.403-416
• /
• 2023

This paper summarised and re-examined the theoretical basis of the commonly used design rule developed by Cochrane in the 1920s to consider staggered bolt holes in tension members, i.e., the s²/4g rule. The rule was derived assuming that the term two times the bolt hole diameter (2d₀) in Cochrane's original equation could be neglected, and assuming a value of 0.5 for the fractional deduction of a staggered hole in assessing the net section area. Although the s²/4g rule generally provides good predictions of the staggered net section area, the above-mentioned assumptions used in developing the rule are doubtful, in particular for a connection with a small gauge-to-bolt-hole diameter (g/d₀) ratio. It was found that the omission of 2d₀ in Cochrane's original equation appreciably overestimates the net section area of a staggered bolted connection with a small g/d₀ ratio. However, the assumed value of 0.5 for the fractional deduction of a staggered hole underestimates the staggered net section area for small g/d₀ ratios. To improve the applicability of the above two assumptions, a modified design equation, which covers a full range of g/d₀ ratio, was proposed to accurately predict the staggered net section area and was validated by the existing test data from the literature and numerical data derived from this study. Finally, a reliability analysis of the test and numerical data was conducted, and the results showed that the reliability of the modified design equation for evaluating the net section resistance of staggered bolted connections can be achieved with the partial factor of 1.25.

• 한국전산구조공학회논문집
• /
• 제25권5호
• /
• pp.397-404
• /
• 2012

지진취약도 곡선은 구조물의 피해를 지반가속도에 따른 확률로 나타낸 것으로, 이를 이용하여 구조물의 지진에 대한 손상확률을 추정할 수 있다. 본 연구에서는 6층, 12층 중복도형 격간벽 구조 시스템에 대한 취약도 곡선을 산출하기 위해 22쌍의 지반가속도를 이용하여 증분동적해석(Incremental dynamic analysis)을 수행하고, 다양한 지진강도에 대한 파괴확률을 구하였다. 정형의 격간벽 구조의 해석결과와 1층의 격간벽을 기둥으로 대체한 구조물, 중앙 복도에 기둥이 추가된 구조물의 해석결과를 비교하였다. 취약도 해석결과에 따르면 동일한 수준의 지진하중에 대하여 중앙 복도에 기둥을 추가한 모델이 가장 높은 내진 안전성을 갖는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제5권5호
• /
• pp.607-624
• /
• 2013

In this study the seismic risk assessments of six- and twelve-story staggered wall system structures with three different structural variations were performed. The performances of staggered wall structures with added columns along the central corridor and the structures with their first story walls replaced by beams and columns were compared with those of the regular staggered wall structures. To this end incremental dynamic analyses were carried out using twenty two pairs of earthquake records to obtain the failure probabilities for various intensity of seismic load. The seismic risk for each damage state was computed based on the fragility analysis results and the probability of occurrence of earthquake ground motions. According to the analysis results, it was observed that the structures with added columns along the central corridor showed lowest probability of failure and seismic risk. The structures with their first story walls replaced by beams and columns showed lowest margin for safety.

• Tribology and Lubricants
• /
• 제18권1호
• /
• pp.24-33
• /
• 2002

The basic equations are derived for the analysis of a staggered labyrinth gas seal which are generally used in high performance compressors and steam turbines. The Bulk-flow is assumed for a single cavity control volume and the flow is assumed to be completely turbulent in circumferential direction. Moody's wall-friction-factor formula is used for the calculation of wall shear stresses in the single cavity control volume. For the reaction force developed by the seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about a centered position. Integration of the resultant first-order pressure distribution along and around the seal defines the rotordynamic coefficients of the staggered labyrinth gas seal. Theoretical results of leakage and rotordynamic characteristics for the staggered labyrinth gas seal are compared with those of the plain seal and see-through labyrinth seal.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.830-837
• /
• 2004

In this paper, the flow properties of staggered labyrinth seals are investigated. Leakage flowrates and pressure distributions are calculated for this seal. Then the dynamic stiffness and damping coefficients are calculated. The results are compared to the results of the some other papers.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.693-702
• /
• 2010

In this paper, FETI(Finite Element Tearing and Interconnecting) method is introduced in order to improve numerical efficiency of Staggered method. The porous media theory, the Staggered method and the FETI method are briefly introduced in this paper. In addition, we account for the MPI(Message Passing Interface) library for parallel analysis, and the proposed combined Staggered method with FETI method. Finally Lagrange multipliers and CG(Conjugate Gradient) algorithm to solve decomposed domain are proposed, and then the proposed method is verified to be numerically efficient by MPI library.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.640-649
• /
• 2017

목조건축의 기반을 넓히고 소비자의 만족도를 향상시키기 위해 기존의 일반목조벽체 및 기타 경량목조벽체에 대한 비교 연구가 필요하다. 따라서 본 연구에서는 일반벽체와 개선된 방식인 교호 샛기둥 벽체와의 성능 비교를 통해 새로운 가능성을 찾고자 하였다. 우선 교호 샛기둥 벽체의 강도적 특성을 평가하고 일반벽체의 강도적 특성을 비교하였다. 일반벽체를 구성하는 목재의 단면이 교호 샛기둥 벽체보다 크기 때문에 일반벽체의 최대하중이 교호 샛기둥 벽체 보다 크게 나타났다. 하지만, 두 그룹간의 통계분석에 의하면 95% 신뢰 수준에서 유의성을 보이지 않아, 교호 샛기둥 벽체는 일반벽체를 대체할 수 있는 가능성을 보여주었다. 교호 샛기둥 벽채는 샛기둥의 단면이 일반벽체보다 작기 때문에 재료를 절약할 수 있어서 일반벽체보다 더 경제적이라고 판단된다. 또한 단열재의 면적 또한 증가하므로 열교 현상의 개선도 기대된다.

• 한국전산유체공학회지
• /
• 제9권4호
• /
• pp.55-63
• /
• 2004

The three-dimensional Stokes flow within a staggered screw channel is obtained by using a finite volume method. The geometry is intended to mimic the single screw extruder having staggered arrangement of flights. The flow solution is then subjected to the analysis of the stirring performance. In the analysis of the stirring performance, the stretching-mapping method developed by the author is employed for calculating the materials' stretching exponents, which are to be used in quantification of the mixing effect. The numerical results Indicate that the staggered geometry gives indeed far much better stirring-performance than the standard (nonstaggered) flight geometry. It was also shown that care must be given to the selection of the basis planes for evaluating the local stretching rate, and it turns out that the best method (H-method) has its basis plane just on the half way between the past and future evolution of fluid particles subjected to the defromation. In evaluating the stretching exponent, the expansion ratio must be considered which is one of the characteristic differences of the actual three-dimensional flows from the two-dimensionmal counterparts. The larger axial pressure-difference causes in general the smaller stirring performance while the flow rate is increased. The smaller channel length also increases the stirring performance.