• Composites Research
• /
• v.22 no.6
• /
• pp.39-44
• /
• 2009

The effect of exposure times on the aging characteristics of carbon fiber/epoxy composite ring specimen was evaluated using an accelerating aging tester. Combined exposure conditions, such as temperature, moisture, and ultraviolet, were applied up to 3000 hours. Tensile properties and flexural properties including the effect of curvature were evaluated on the specimens subject to various exposure times through a material testing system. Their aging surfaces were observed through a scanning electron microscope. According to the results, tensile modulus was little affected by the exposure times. However, tensile strength, at the early stage of the exposure times, increased due to physical aging and curing reaction, but tensile strength slightly decreased due to degradation as the exposure times increased. The flexural modulus and flexural strength increased at the early stage of the exposure times, but slightly decreased as the exposure times increased. Aging surfaces of the specimens examined using the scanning electron microscope revealed a different morphology in various exposure times and provided useful information for identifying the degradation in mechanical properties of the composite subject to various exposure times.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.2
• /
• pp.59-65
• /
• 2007

Scanning Prove Microscope (SPM) - based Data Storage (SDS)는 Atomic Force Microscope (AFM)을 이용하여 Cantilever Tip 이 저장 장치 미디어에 나노미터 단위로 비트를 읽고, 쓰고 지우는 저장 장치로써, x, y 두 축을 이용한다. 따라서 축간 coupling 의 영향이 크게 발생한다. 따라서 축간 coupling 의 영향을 고려하여 제어기를 설계하여야 한다. 본 논문은 coupling 요소를 제거하기 위하여 Feedforward Decoupler 를 설계하여 Stage 의 입력 앞 단에 추가하는 방법을 제안하였다. Feedforward Decoupler 를 추가함으로써 coupling 요소가 줄어드는 것을 모의 실험을 통해 확인한다. 이를 통해 나노급으로 보다 정밀한 제어가 가능함을 확인하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.871-877
• /
• 2004

In this paper, for manufacturing a custom-made shoes, shape of foot acquired three-dimensional measurement device which makes shoe-last data for needing a custom-made shoes is founded on artificial intelligence technique and it shows method restoring to the original shape in optimized state. the developed system for this study is based on PC which uses existing three dimensional measurement method. And it gains shoe-last and data of foot shape going through 8 CCD(Charge Coupled Device) Which equipped top and bottom, right and left sides and 4 lasers which also equipped both sides and upper and lower sides. The acquired data are processed image processing algorithm using artificial intelligence technique. And result of data management is better quality of removing noise than other system not using artificial intelligence technique and it can simplify post-processing. So, this paper is constituted hardware and software system and it used neural network for determining threshold value, when input image on pre-processing step is being stage of image binarization and present that results.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.2
• /
• pp.57-62
• /
• 2008

Electrochemical properties of Ti-30Ta-$(3{\sim}15)$Nb alloys coated by HA/Ti compound layer have been studied by various electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10, and 15 wt% Nb contents were manufactured by the vacuum furnace system. The specimens were homogenized for 24 hrs at $1000^{\circ}C$. The samples were cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The HA/Ti non-coated and coated morphology of Ti alloy were analyzed by x-ray diffractometer(XRD) and filed emission scanning electron microscope(FE-SEM). The corrosion behaviors were investigated using potentiodynamic method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The homoginazed Ti-30Ta-$(3{\sim}15wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and ${\beta}$ phase peak was predominantly appeared with increasing Nb content. The microstructure of Ti alloy was transformed from needle-like structure to equiaxed structure as Nb content increased. HA/Ti composite surface showed uniform coating layer with 750 nm thickness. The corrosion resistance of HA/Ti composite coated Ti-alloys were higher than those of the non-coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.97-106
• /
• 2002

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the light scattering patterns with time evolved during water vapor quenching (relative humidity of 53 (${\pm}3)%$ at $26^{\circ}C$ of polysulfone (PSf)/NMP/Alcohol and chlorinated poly(vinyl chloride) (CPVC)/THF/Alcohol, respective1y. Time dependence of the position of the light scattering maximum was observed at PSf dope solutions, confirming spinodal decomposition (SD), while CPVC dope solutions showed a decreased scattered light intensity with an increased q-value, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahn's linear theory of spinodal decomposition, regardless of types of non-solvent additive. Also, the size scales obtained by SALS were mutually compared to domain sizes gained by FE-SEM measurement. These observations of scattering pattern were much clearly observed for the 20PSf/70NMP/10n-butanol (w/w%) and agreed with the theoretical predictions for scattering patterns of each stage like the early, the intermediate, and the late stage of SD type phase separation. As the scattering maximum was observed at the larger angles (larger q) in the order of n-butanol > n-propanol > methanol > no alcohol, the pore size of final morphology decreased.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.4
• /
• pp.377-388
• /
• 2006

Most structures experience deterioration after construction. A routine inspection and maintenance must be accomplished for the efficient use of the structures. The routine inspection will play a major role on the determination of maintenance period and method. This study aims development of an automated tunnel inspection system based upon a 3 dimensional laser scanner. As for the initial stage of the project, a prototype tunnel scanner has been developed. The development of a tunnel scanner prototype follows comparison between image scanning and laser scanning system and investigation on the applicability and adaptivity of the scanners to the railway tunnel scanner. The applicability of the laser scanner on the railway tunnel has been confirmed from the pilot test by using commercialized general purpose close range laser scanner and applicability of a laser scanner as a railway tunnel scanner has been checked. From the result, a prototype of railway tunnel scanner has been built and the calibration of the system was carried out. Finally the developed tunnel laser scanner has been applied to different shapes and sizes of tunnels in use.

• The Korean Journal of Nuclear Medicine
• /
• v.15 no.2
• /
• pp.1-9
• /
• 1981

Bone scans with $^{99m}Tc-MDP$ (methylene diphosphonate) were obtained and analysed in 574 patients with biopsy-proven malignancy, who visited Seoul National University Hospital from April, 1979 to June, 1931. Clinical staging was done in all patients without bone scan information and compared with bone scan to determine the predictive value of bone scanning. 1. Primary site of the maligancies were lung in 152, breast in 97, stomach in 43, colon in 15, esophagus in 9, liver and pancreas in 11, kidney in 14, bladder in 27, prostate in 22, thyroid in 20, skin in 11, bone in 9, head and neck in 36, ovary and uterus in 17, hematopoietic and lymphoretic ular system in 33, nervous system in 10, and others in 9 cases. Primary site was not defined in 39 cases. 2. Bone scans were positive in 186 cases (32.4%), which, included 48 cases (31.6%) of lung cancer, 27 cases (27.8%) of breast cancer, 12 cases(28%) of stomach cancer, 6 cases(40%) of colon cancer, 6 cases(43%) of kidney tumor, 4 cases(15%) of bladder cancer, 14 cases(64%) of prostate cancer, 3 cases(15%) of thyroid cancer and 66 other cases. 3. Bone scans were suspicious in 64 cases (11.2%) which included 29 cases (19.1%) of lung cancer, 10 cases (10.3%) of breast cancer, 4 cases (9.3%) of stomach cancer, one case (7%) of colon cancer, 3 cases(11%) of bladder cancer, 2 cases(10%) of thyroid cancer and 15 other cases. 4. Out of 121 cases with early stage of malignancy (which included 20 cases of lung cancer in stage I, II, 38 cases of breast cancer, 13 cases of stomach cancer, 8 cases of kidney tumor, 14 cases of thyroid cancer in stage $I{\sim}III$, and 6 cases of colon cancer, 14 cases of bladder cancer, 8 cases of prostate cancer in stage $A{\sim}C$, bone scans were positive in 5 cases (4.1%) which included 3 cases of lung cancer one case of breast cancer and one case of prostate cancer, and considered as further advanced stage. Out of 121 cases with early stage of malgnancy, bone scans were suspicious in 21 cases (17.4%) which inlcuded 9 cases of lung cancer, 4 cases of breast cancer, 2 cases of stomach cancer, one case of colon cancer, 3 cases of bladder cancer, and 2 cases of thyroid cancer. From these results, we concluded bone scan was useful in detecting bone metastasis in patients of early stage of malignancy, determining prognosis and establishing therapentic plan.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.05a
• /
• pp.81-85
• /
• 2002

Small angle light scattering and field emission scanning electron microscope have been used to quantify the kinetics of liquid-liquid separation behavior during water vapor(RH52%[$\pm$3%] at 27$^{\circ}C$) quenching (non-solvent induced phase separation, NIPS) of polysulfone/NMP/Alcohol and CPVC/THF/Alcohol, respectively. Time dependence of the position of the light scattering maximum was observed at polysufone dope solutions, confirming spinodal secomposition (SD). while CPVC dope solutions showed a decreased scattered light intensity with a increased q-valuel, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahns linear theory of spinodal decomposition,[1-3] regardless of types of non-solvent additive.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.92-97
• /
• 2015

A study on reaction kinetics for a PTMG/TDI prepolymer with 2,2'-dichloro-4,4'-methylenedianiline (MOCA), of which formulations may be generally used for fabricating high performance polyurethane elastomers, was peformed using non-isothermal differential scanning calorimetry (DSC). A number of thermograms were obtained at several constant heating rates, and analysed using Flynn-Wall-Ozawa (FWO) isoconversional method for activation energy, $E_a$ and extended-Avrami equation for reaction order, n. Urea formation reaction of the present system was observed to occur through the simple exothermic reaction process in the temperature range of $100{\sim}130^{\circ}C$ for the heating rate of $3{\sim}7^{\circ}C/min$. and could be well-fitted with generalized sigmoid function. Though activation energy was nearly constant as $53.0{\pm}0.5kJ/mol$, it tended to increase a little at initial stage, but it decreases at later stage by the transformation into diffusion-controlled reaction due to the increased viscosity. Reaction order was evaluated as about 2.8, which was somewhat higher than the generally well-known $2^{nd}$ order values for the various urea reactions. Both the reaction order and reaction rate explicitly increased with temperature, which was considered as the indication of occurring the side reactions such as allophanate or biuret formation.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.181-188
• /
• 2008

A.C. impedance properties of HA/Ti compound layer coated Ti-30Ta-($3{\sim}15$)Nb alloys have been studied by electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10 and 15 wt% Nb were manufactured by the vacuum furnace system. And then specimen was homogenized at $1000^{\circ}C$ for 24 hrs. The sample was cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The non-coated and coated morphology of Ti alloy were analyzed by X-ray diffractometer (XRD), energy X-ray dispersive spectroscopy (EDX) and filed emission scanning electron microscope (FE-SEM). The corrosion behaviors were investigated using A.C. impedance test (PARSTAT 2273, USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Ti-30Ta-($3{\sim}15\;wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and $\beta$ phase peak was predominantly appeared in the case of increasingly Nb contents. The microstructures of Ti alloy were transformed from needle-like structure to equiaxed structure as Nb content increased. From the analysis of coating surface, HA/Ti composite surface uniformed coating layer with 750 nm thickness. The growth directions of film were (211), (112), (300) and (202) for HA/Ti composite coating on the surface after heat treatment at $550^{\circ}C$, whereas, the growth direction of film was (110) for Ti coating. The polarization resistance ($R_p$) of HA/Ti composite coated Ti-alloys were higher than those of the Ti and HA coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.