• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.42-50
• /
• 2005

This paper presents an ultra precision machining system using a high sensitive force sensing module to measure machining forces and penetration displacement in a tip-based nanopatterning. The force sensing module utilizes a leaf spring mechanism and a capacitive displacement sensor and it has been designed to provide a measuring range from 80 ${\mu}N$ to 8 N. This force sensing module is mounted on a PZT driven in-feed motion stage with 1 nm resolution. The sample can be moved by X-Y scanning motion stage with 5 nm resolution. In nano indentation experiments and patterning experiments, the machining forces were controlled and monitored by the force sensing module. Then, the patterned samples were measured by AFM. Experimental results demonstrated that the developed system can be used as an effective device in nano indentation and nanopatterning operation.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.79-82
• /
• 1999

Using Small Angle Light Scattering (SALS), the effect of quench depth on the kinetics of phase separation for ternary solution blends was investigated. The system was composed of two polymers (polystyrene and polybutadiene) and a solvent (toluene). The analyses of the early stage of phase separation were based of the Cahn-Hilliard theory [1,5]. Apparent diffusion coefficients and the fastest mode of fluctuations were evaluated, when quench depth of the system were varied near the critical composition of polymer. In the late stage of phase separation, the domain growth showed a power law with the 1/3 exponent, i.e. $q_m(t)~t^{-1/3}$. For comparison between real images and scattering profiles with time, the image of phase domains with time were obtained by using Laser Confocal Scanning Microscopy (LSCM).

• Economic and Environmental Geology
• /
• v.24 no.1
• /
• pp.1-8
• /
• 1991

North ore deposits of the Dunjeon gold mine is disseminated-stockworks deposits emplaced in Ordovician Dongjeom quartzite. Six types of fluid inclusions are recongnized in the stage I quartz. Among them polyphase inclusions(type-IV-A, B) are predominent in the lower part of stage I quartz crystals whereas liquid and gas inclusions(type I, II) are abundant in the upper part of the same quartz crystals. Liquid $CO_2$-bearing inclusions(type III-A, B)occur as pseudosecondary inclusions. Solid phases in polyphase inclusions are identified by using scanning electron microscopy combined with energy dispersive x-ray spectroscopy. The solid phases are as follows; halite, sylvite, hydrophyllite, quartz, muscovite, calcite, ankerite, K-Mg-Fe-Al-Si mineral, Ca-Fe-Si mineral, Mg-Al-Si mineral, two kinds of Fe-mineral and Cu-Fe mineral. Results of freezing and heating experiments of fluid inclusions and identification of daughter minerals in polyphase inclusions in the stage I quartz reveal that ore fluids were high saline system NaCl-KCl-$CaCl_2$-$H_2O$ in the earier stage and then evolved to rather simple system NaCl-$H_2O$ in the later stage, and temporally fluid mixing occured with system $CO_2$-$H_2O$. Homogenization temperatures and salinity of fluid inclusions in the stage I range from 290 to $454^{\circ}C$ and from 0.2 to 54.2 wt. % equivalent to NaCl.

• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.474-481
• /
• 2008

Scanning worm increases network traffic load and result in severe network congestion because it is a self-replicating worm and send copies of itself to a number of hosts through the Internet. So an early detection system which can automatically detect scanning worms is needed to protect network from those attacks. Although many studies are conducted to detect scanning worms, most of them are focusing on the method using packet header information. The method using packet header information has long detection delay since it must examine the header information of all packets entering or leaving the network. Therefore we propose an algorithm to detect scanning worms using network traffic characteristics such as variance of traffic volume, differentiated traffic volume, mean of differentiated traffic volume, and product of mean traffic volume and mean of differentiated traffic volume. We verified the proposed algorithm by analyzing the normal traffic captured in the real network and the worm traffic generated by simulator. The proposed algorithm can detect CodeRed and Slammer which are not detected by existing algorithm. In addition, all worms were detected in early stage: Slammer was detected in 4 seconds and CodeRed and Witty were detected in 11 seconds.

• Korean Journal of Social Welfare
• /
• v.58 no.4
• /
• pp.291-312
• /
• 2006

Incentive-Therapy approach on substance abuser has a solid theoretical base in Behavior Psychology and shows the effectiveness empirically in US. The purpose of this exploratory study was to evaluate the effectiveness of Incentive-Therapy on two alcohol abusers using ABA Single System Design in a community welfare agency, Korea. It proceeded for 12 week-baseline stage, 6-week intervention stage and 4-week postintervention stage through scanning whether alcohol abuser drinks or not by the alcohol analyzer as a target behavior. As a results, this study showed that two abusers' drinking were decreased in the middle of intervention stage in incentive-therapy but they showed differently in the postintervention stage : One sustained his abstinence and the other recurred to drink. Thus, we concluded Incentive-Therapy had better adaptability in community welfare agency in that alcohol abusers were driven to motivate for abstinence and then had an opportunity for psycho-social counseling and social welfare intervention consistently.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.1
• /
• pp.89-93
• /
• 2002

This paper introduces a vision-based on-line fabric inspection methodology of woven textile fabrics. Current procedure for determination of fabric defects in the textile industry is performed by human in the off-line stage. The advantage of the on-line inspection system is not only defect detection and identification, but also 벼ality improvement by a feedback control loop to adjust set-points. The proposed inspection system consists of hardware and software components. The hardware components consist of CCD array cameras, a frame grabber and appropriate illumination. The software routines capitalize upon vertical and horizontal scanning algorithms characteristic of a particular deflect. The signal to noise ratio (SNR) calculation based on the results of the wavelet transform is performed to measure any deflects. The defect declaration is carried out employing SNR and scanning methods. Test results from different types of defect and different style of fabric demonstrate the effectiveness of the proposed inspection system.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.67-72
• /
• 1999

Scanning probe Microscope(SPM) such as Scanning Tunneling Microscope(STM) and Atomic Force Microscope(AFM) was shown to be the powerful tool for nano-scale characterization of material surfaces Using this technique, surface morphology of the cyclically deformed Cu or Cu-Al single crystal was observed. The surface became proportionately rough as the number of cycles increased, but after some number of cycles no further change was observed. Slip steps with the heights of 100 to 200 nm and the widths of 1000 to 2000 nm were prevailing at the stage. The slipped distance of one slip system at the surface was not uniform. and formation of the extrusions or intrusions was assumed to occur such place. By comparing the morphological change caused by crystallographic orientation, strain amplitude, number of cycles or stacking fault energy, some interesting results which help to clarify the basic mechanism of fatigue damage were obtained. Furthermore, applicability of the scanning tunneling microscopy to fatigue damage is discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.402.1-402.1
• /
• 2014

Photonic force microscopy (PFM) is an optical tweezers-based scanning probe microscopy, which measures the forces in the range of fN to pN. The low stiffness leads proper to measure single molecular interaction. We introduce a novel photonic force microscopy to stably map various chemical properties as well as topographic information, utilizing weak molecular bond between probe and object's surface. First, we installed stable optical tweezers instrument, where an IR laser with 1064 nm wavelength was used as trapping source to reduce damage to biological sample. To manipulate trapped material, electric driven two-axis mirrors were used for x, y directional probe scanning and a piezo stage for z directional probe scanning. For resolution test, probe scans with vertical direction repeatedly at the same lateral position, where the vertical resolution is ~25 nm. To obtain the topography of surface which is etched glass, trapped bead scans 3-dimensionally and measures the contact position in each cycle. To acquire the chemical mapping, we design the DNA oligonucleotide pairs combining as a zipping structure, where one is attached at the surface of bead and other is arranged on surface. We measured the rupture force of molecular bonding to investigate chemical properties on the surface with various loading rate. We expect this system can realize a high-resolution multi-functional imaging technique able to acquire topographic map of objects and to distinguish difference of chemical properties between these objects simultaneously.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.333-341
• /
• 2006

Since considerable time passed after completion of dam construction, Methods to judge the safety and/or to manage effectively have extreme limitation and restriction. Behavior analysis based on one point (site) by such as surface settlement gauge is typically performed in order to define deformation characteristic of dam. However, deformation characteristics of entire dam can not be analyzed by this method. This study adopted state-of-the-art terrestrial laser scanning technology, and developed the technology to analyze the entire deformation of dam. The analysis was compare with the outputs of surface settlement gauge to confirm the performance of 3D terrestrial laser scanning technology. As a result, through analyses of laser scanning data and the surface settlement gauge data, the studied dam shows behavior of deformation by own weight of dam. It is possible to confirm that the dam is entering the stage of stabilization presently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.340-351
• /
• 2010

This paper presented compact CW sub-THz imaging system using the terahertz transmitter(Tx) that generates 0.34 THz electromagnetic wave based on electronic device. Using 0.34 THz electromagnetic wave generated by Tx, we measured transmitting terahertz wave magnitude and phase information respectively with terahertz receiver(Rx) based on sub harmonic mixer. This paper measured and compared images of several samples to obtain better imaging results by changing time delay and step distance of scanning stage which affect image resolution. Also, through the imaging measurement of various samples, we were able to assure possibility of application of terahertz wave.