• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.391-405
• /
• 2003

The Daebong gold-silver deposit consists of mesothermal massive quartz veins thar are filling the fractures along fault shear (NE, NW) Bones within banded or granitic gneiss of Precambrian Gyeonggi massif. Based on vein mineralogy, ore textures and paragenesis, ore mineralization of this deposits is composed of massive white quartz vein(stage I) which was formed in the same stage by multiple episodes of fracturing and healing, and transparent quartz vein(stage II) which is separated by a major faulting event. Stage I is divided into the 3 substages. Ore minerals of each substages are as follows: 1) early stage I=magnetite, pyrrhotite, arsenopyrite, pyrite, sphalerite, chalcopyrite, 2) middle stage I=pyrrhotite, arsenopyrite, pyrite, marcasite, sphalerite, chalcopyrite, galena, electrum and 3) late stage I=pyrite, sphalerite, chalcopyrite, galena, electrum, argentite, respectively. Ore minerals of the stage II are composed of pyrite, sphalerite, chalcopyrite, galena and electrum. Systematic studies (petrography and microthermometry) of fluid inclusions in stage I and II quartz veins show fluids from contrasting physical-chemical conditions: 1) $H_2O-CO_2-CH_4-NaCl{\pm}N-2$ fluid(early stage I=homogenization temperature: 203∼3$88^{\circ}C$, pressure: 1082∼2092 bar, salinity: 0.6∼13.4 wt.%, middle stage I=homogenization temperature: 215∼28$0^{\circ}C$, salinity: 0.2∼2.8 wt.%) related to the stage I sulfide deposition, 2) $H_2O-NaCl{\pm}CO_2$ fluid (late stage I=homogenization temperature: 205∼2$88^{\circ}C$, pressure: 670 bar, salinity: 4.5∼6.7 wt.%, stage II=homogenization temperature: 201-3$58^{\circ}C$, salinity: 0.4-4.2 wt.%) related to the late stage I and II sulfide deposition. $H_2O-CO_2-CH_4-NaCl{\pm}N_2$ fluid of early stage I is evolved to $H_2O-NaCl{\pm}CO_2$ fluid represented by the $CO_2$ unmixing due to decrease in fluid pressure and is diluted and cooled by the mixing of deep circulated meteoric waters ($H_2O$-NaCl fluid) possibly related to uplift and unloading of the mineralizing suites. $H_2O-NaCl{\pm}CO_2$ fluid of stage II was hotter than that of late stage I and occurred partly unmixing, mainly dilution and cooling for sulfide deposition. Calculated sulfur isotope compositions ({\gamma}^{34}S_{H2S}$) of hydrothermal fluids (3.5∼7.9%o) indicate that ore sulfur was derived from mainly an igneous source and partly sulfur of host rock. Measured and calculated oxygen and hydrogen isotope compositions ({\gamma}^{18}O_{H_2O}$, {\gamma}$D) of ore fluids (stage I: 1.1∼9.0$\textperthousand$, -92∼-86{\textperthansand}$, stage II: 0.3{\textperthansand}$, -93{\textperthansand}$) and ribbon-banded structure (graphitic lamination) indicate that mesothermal auriferous fluids of Daebong deposit were two different origin and their evolution. 1) Fluids of this deposit were likely mixtures of $H_2O$-rich, isotopically less evolved meteoric water and magmatic fluids and 2) were likely mixtures of $H_2O$-rich. isotopically heavier $\delta$D meteoric water and magmaticmetamorphic fluids.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.279-287
• /
• 1993

In the zinc-lead (-silver) ores from the Yeonhwa 1 mine, stannite is widespread, though minor in amount It may be divided largely into two species on the basis of its chronological order during mineralization; i.e., stannite I formed in Stage I, and stannite II formed in Stage II. Also, the mineral may be classified into two types according to the difference of its associates; i.e., stannite 1 closely associated with sphalerite, and stannite 2 with galena. In general, the stannite 1 tends to predominate in the stannite I and the stannite 2 in the stannite II. The formation temperature and sulphur fugacity of stannite 1 deduced from stannite-sphalerite geothermometry are from 280 to $350^{\circ}C$ and from $10^{-11}$ to $10^{-8}$ atm.

• Journal of Korea Foundry Society
• /
• v.34 no.1
• /
• pp.1-5
• /
• 2014

The austempering transformation behavior in Fe-0.7wt.%C-2.3wt.%Si-0.3wt.%Mn steel is investigated. Each specimen was austenitized for 60 min at $900^{\circ}C$, and austempered at $380^{\circ}C$ for different time periods varying from 2 min to 256 min. After the austempering heat treatment, the Stage I and II evolutions are performed using optical metallography, X-ray diffraction and image analyses. Variations in the X-ray diffraction patterns and lattice parameters of the ferrite and austenite demonstrate that the residual austenite decomposes into ferrite and carbide during the Stage II evolution; moreover the amount of ferrite increases during the Stage I evolution. While the amount of austenite increases during Stage I, it dicreases during Stage II. Overall, the variations in the volume fractions of the microstructure and carbide formation in stages I and II meet high temperature austempering reaction of the ausferrite microstructure.

• Economic and Environmental Geology
• /
• v.20 no.2
• /
• pp.107-118
• /
• 1987

The south ore deposits of the Dunjeon gold mine is a fissure-filling vein emplaced in the granitoids, skarnized and hornfelsified rocks of Ordovician Dumudong formation. The vein mineral paragenesis is complicated by repeated fracturing but three distinct depositional stages can be recognized; (1) base metal sulfides stage, (2) base metal sulfides, antimony-bismuthsulfosalts and native metals stage, (3) barren carbonates stage. Gold was mainly deposited in stage II. Fluid inclusion data indicate that fluid temperatures were from $310^{\circ}C$ to $402^{\circ}C$ during stage I and then declined steadily to $148^{\circ}C$ in the closing late stage III. Salinities were in the range of 0.4 to 5.0 equivalent weight percent NaCl and do not reveals any systematic trend through stag I, II and III. Ore mineralogy suggests that temperatures and sulfur fugacities in the earlier stage II were in the range of $340^{\circ}C$ to $360^{\circ}C$, $10^{-8}$ to $10^{-9}$ atm. respectively and then declined steadily to the range of $185^{\circ}C$ to $200^{\circ}C$ and $10^{-17}$ to $10^{-19}$atm. in the later stage II.

• Economic and Environmental Geology
• /
• v.18 no.3
• /
• pp.225-237
• /
• 1985

Mineralization of Daehwa and Donsan W-Mo deposits can be devided into three distinct depositional stages on the basis of mineral paragenesis and flnid inclusion studies; stage I, deposition of oxides and silicates ; stage II, deposition of base-metal sulfides and sulfosalts with carbonates; stage III, deposition of barren calcite and fluorite. Tungsten, molybdenum and tin mineralization occurred in stage I. Fluid inclusion studies reveal that ore fluid of stage I were homogeneous $H_2O-CO_2$ fluids containing 3.5~14.6 mol % $CO_2$. Minimum temperature and pressure of stage I ore fluids were $240^{\circ}C$ and 500 bars respectively. Salinities of aqueous type I inclusions in minerals of stage I range from 3.7 to 7.6 wt. % equi. NaCl. whereas those of $CO_2$-containing type III inclusions range from 0.3 to 4.4 wt. %. Temperatures of stage II ore fluids range from 200 to $305^{\circ}C$ on the whole and salinities were in the range of 3.2~7.2 wt. %. Homogenization temperatures of fluid inclusions in calcite and fluorite of stage III range from 114 to $186^{\circ}C$ and salinities were in the range of 0.9~4.3 wt. %. Sulfur fugacities during stage II deduced from mineral assemblages and tamperature data from fluid inclusions declined from earlier to later in the range of $10^{-11}{\sim}10^{-18}atm$. Fluid inclusion evidences suggest that the dominance of $CO_2$ in ore fluid during W-Mo mineralization is the characteristic features of Cretaceous W-Mo deposits of central district of Korea compared to those of Kyeongsang basin district.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.245-258
• /
• 1984

Geoje copper ore deposits are fissure filled copper veins which developed in late Cretaceous pyroclastics, andesite and shale. Mineral paragenesis reveals a division of the hydrothermal mineralization into three stages: Stage I, deposition of pyrite, magnetite, specularite, quartz and chlorite; Stage II, deposition of chalcopyrite, sphalerite, galena, tetrahedrite, aikinite, cosalite, electrum, quartz and chlorite; Stage III, deposition of barren calcite. Filling temperatures of fluid inclusions in quartz of stage I range from 171 to $282^{\circ}C$ whereas fluid inclusions in quartz and sphalerite of stage II range from 213 to $262^{\circ}C$ and from 186 to $301^{\circ}C$ respectively. Salinities of fluid inclusions in quartz of stage I range from 5.2 to 11.2 weight percent equivalent to NaCl. Salinities of fluid inclusions in quartz and sphalerite of stage II range from 6.6 to 10.9 and from 7.1 to 14.4 weight percent equivalent NaCl. Salinities of ore fluid during major mineralization stage in this deposits reveal nearly the same ranges as those of many copper deposits in Koseong copper mining district which located about 30km apart from Geoje mine. But filling temperatures of fluid inclusions formed during major copper mineralization stage in this deposits show slightly lower than those of copper deposits in Koseong copper mining district.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.311-325
• /
• 1993

The Ohto and Tohyun copper mine which are located 4 km southeast of Euiseong, Gyeongsangbukdo, Republic of Korea show various common geologic and mineralogic features. Both copper deposits are of hydrothermal-vein types, and associated with fracture system developed during formation of the Geumseong-san caldera in late Cretaceous age. According to structures and mineral assemblages, the mineralization processes have progressed in four stages: three hypogene mineralization stages and one supergene stage. Three hypogene stages are 1) stage I forming $N5{\sim}20^{\circ}E$ veins in the Ohto mine, 2) stage II building $N5^{\circ}W{\sim}N5^{\circ}E$ veins in the Tohyun mine, and 3) stage ill bringing $N80^{\circ}E$ veins which crosscut veins of the stage II. The vein ores consist mainly of pyrite, arsenopyrite, galena and chalcopyrite, minor or trace amounts of magnetite, hematite, pyrrhotite, stannite, bournonite, boulangerite, stibnite, galenobismutite, native bismuth, marcasite, geothite and malachite. The main gangue minerals are quartz and calcite. Wallrock is altered by sericitization, chloritization, pyritization, carbonitization and argillization. Arsenic and copper contents in arsenopyrite increase from stage I to stage III (from 31.28 to 33043 atom.% As) and (from 0.04 to 0040 atom.% Co). Going from stage I to stage III Fe and Mn contents in sphalerite decreases from 12.56 to 0.44 wt.% and from 0.24 to 0.01 wt.%, respectively. The compositional data of arsenopyrite in the early stage I indicate a temperature of $420{\sim}365^{\circ}C$ and sulfur fugacity of $10^{-6.5}{\sim}10^{-8.3}$ atm. Chalcopyrite and pyrrhotite assemblage suggest that Middle stage I was deposited at below $334^{\circ}C$. The compositional data of arsenopyrite in early stage II suggest a temperature range of $425{\sim}390^{\circ}C$ and sulfur fugacity codition of $10^{-6.4}{\sim}10^{-7.3}$ atm. Based on fluid inclusion the Middle stage II was regarded as to be deposited at $420{\sim}337^{\circ}C$ (Chi et al., 1989). Referring composition of sphalerite and stannite middle-late stage II seem to be deposited around $246^{\circ}C$ and $10^{-16.5}$ atm. sulfur fugacity. The ${\delta}^{34}S$ values of sulfide minerals in the Stage I, II, III range from 4.9 to 7.6%0 and indicate igneous ore fluid origin. Based on differences in mineral assemblages, chemical composition and chemical environments of Ohto and Tohyun mine its mineralization are considered to be formed at diffent mineralization ages and by different ore fluids.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.35-46
• /
• 2007

Shinyemi skarn deposits occur as Fe-Mo skarn type and Pb-Zn-Cu hydrothermal replacement type along the contact between Cretaceous Shinyemi granitoids and Cambro-Ordovician mixed limestone and dolostone sequence of the Choseon Supergroup. In the lower part of Western Shinyemi ore body two stages of skarn formation have been observed: the early, stage I (magnesian) skarn with Fe mineralization and the late, stage II(calcic) skarn with Mo mineralization. The stage I skarn spatially is overprinted by stage II skarn. The stage I skarn is predominantly composed of olivine, magnetite and diopside whereas, the stage II skarn is dominated by hedenbergite and garnet. The skarnification process occurred in two stages, both prograde and retrograde for stage I and stage II skarns. In stage I, the prograde skarns, mainly composed of anhydrous silicate minerals, were formed at relatively higher temperatures (about $400\;to\;550^{\circ}C$) under low $CO_{2}$ fugacity ($X_{CO2}<0.1$) conditions. On the other hand, the retrograde skarns that consisted of hydrous minerals were formed at lower temperatures (about $300\;to\;400^{\circ}C$).

• Journal of the Korean Chemical Society
• /
• v.44 no.2
• /
• pp.127-137
• /
• 2000

Eleven new compounds that are composed of bis(p-substituted phenyl) terephthalate unitand the decyloxy pendant as lateral were synthesized and their thermal and liquid crystalline properties were studied by the differential scanning calorimetry (DSC) and on a hot-stage of a polarizing microscope. The ter-minal substituent groups of the compound were varied; X= -H(II-H), -F(lI-F), -CII(II-CI), -Br(ll-Br), -I(II-I), -$NO_2(lI-NO_2$), $-CF_3(II-CF_3$), -$OC_2H_5(II-OC_2H_5$), -$OC_4H_9(II-OC_4H_9$), -$C_6H_5(Il-C_6H_5$). The compounds of $II-OC_2H_5,\;II-OC_4H_9$ and $II-C_6H_5$ were monotropically nematic. In contrast, the compounds of Il-H, II-F, II-Cl, II-Br, II-I, $lI-NO_2$, $II-CF_3$, and II-CN did not show liquid crystalline properties.

• Economic and Environmental Geology
• /
• v.30 no.3
• /
• pp.197-207
• /
• 1997

Rocks in the Cheongsong mine area consist of Precambrian gneiss, Cretaceous sedimentry rocks and late Cretaceous quartz porphyry. The Cheongsong deposit is composed of many hydrothermal quartz veins of strikes $N30^{\circ}{\sim}60^{\circ}W$, dips $60{\sim}85^{\circ}E$ which fill WNW fault system. Pyrite and hematite occur within transparent quartz near margins of early stage II, and milky quartz of middle stage II coexists with sphalerite, chalcopyrite and galena coexisting with Cu-Pb-Bi minerals in center part of stage II quartz veins. Stage III calcite vein filled cracks or fractures of earlier quartz veins contains native copper and chalcopyrite. Supergene minerals are chalcocite, covellite, malanchite and chrysocolla. Alteration minerals are sericite, chlorite, argillite, epitode and pyrite. Ranges of salinities and homogenization temperatures for fluid inclusions in the individual periods of stage II are: 3.7 to 7.8 wt.% eq. NaCl and 200 to $380^{\circ}C$ in transparent quartz of early stage II; 0.7 to 6.4 wt.% eq. NaCl and 200 to $320^{\circ}C$ in milky quartz of middle stage II; 0.0 to 0.9 wt.% eq. NaCl and 250 to $320^{\circ}C$ in calcite of late stage II. Those of stage III calcite range about 0 wt.% eq. NaCl, and from 140 to $260^{\circ}C$, respectively. The relationship between salinities and temperatures shows decrease tendency with paragenetic time from stage II to III. The ${\delta}^{18}O_{H_2O}$ value is 0.5‰ in stage I, range from 0.5 to -0.4‰ in stage II, and from -3.2 to -3.7‰ in stage III. Calcite in the stage II and stage III has ${\delta}^{13}C$ values of -5.0‰ and -4.5 to -4.9‰, respectively. There is a decrease in sulfur fugacity values with paragenetic time of stage II, from $10^{-6.3}$ atm for early mineralization, to $10^{-6.5}$ atm for middle stage, to $10^{-8.0}$ atm for late mineralization of stage II. The results of stable isotope and fluid inclusion indicate that ore fluids reacted with meteoric water and wall rock in the Cheongsong hydrothermal system.