• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.125-139
• /
• 2010

Behavior of heavy metals and arsenic in the tailings of Songcheon Au-Ag mine was characterized via both mineralogical and geochemical methods. Mineral composition of the tailings was investigated by X-ray diffractometry, energy-dispersive spectroscopy, and electron probe micro-analyzer (EPMA) and total concentrations of heavy metals and arsenic and their chemical forms were analyzed by total digestion of aqua regia and sequential extraction method, respectively. The results of mineralogical study indicate that the tailings included mineral particles of resinous shape mainly consisting of galena, sphalerite, pyrite, quartz, and scorodite, and specifically socordite was identified in the form of matrix. EPMA quantitative analyses were performed to evaluate the weatherability of each mineral, and the results suggest that it decreased in the sequence of arsenopyrite > galena > sphalerite > pyrite. The weathering pattern of galena was observed to show distinctive zonal structure consisting of secondary minerals such as anglesite and beudantite. In addition, almost all of arsenopyrite has been altered to scorodite existing asmatrix and galena, sphalerite, and pyrite which have lower weatherability than arsenopyrite were identified within the matrix of scorodite. During the process of alteration of arsenopyrite into scorodite, it is likely that a portion of arsenic was lixiviated and caused a great deal of detrimental effects to surrounding environment. The results of EPMA quantitative analyses verify that the stability of scorodite was relatively high and this stable scorodite has restrained the weathering of other primary minerals within tailings as a result of its coating of mineral surfaces. For this reason, Songcheon tailings show the characteristics of the first weathering stage, although they have been exposed to the surface environment for a long time. Based on the overall results of mineralogical and geochemical studies undertaken in this research, if the tailings are kept to be exposed to the surface environment and the weathering process is continuous, not only hazardous heavy metals, such as lead and arsenic seem to be significantly leached out because their larger portions are being partitioned in weakly-bound (highly-mobile) fractions, but the potential of arsenic leaching is likely to be high as the stability of scorodite is gradually decreased. Consequently, it is speculated that the environmental hazard of Songcheon mine is significantly high.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.239-252
• /
• 2008

Doctoral professionals who majored Home Economics Education are relatively rare and recently have been produced in a limited number of institutions. The purpose of this paper was to analyze the Ph.D. Dissertation majored in Home Economics Education by research subjects and methods. Just twenty dissertations published in domestic universities were selected through internet search to be analyzed in this paper. This research showed five research subject areas of the dissertation such as core concepts and perspectives, curriculum, teaching and learning, teachers empowerment, and others. Each subject had three to five references and time difference in publication. The research subject related to concepts and perspectives was more likely to be studied in an early stage, followed by the subject of curriculum. The research subject became to be varied to teaching and learning and teachers empowerment areas. The research methods were associated with the research subject, as expected. Literature analysis was common in the subject on concepts and perspectives, curriculum, and textbook analysis, while survey was in teachers empowerment. Teaching and learning subject used various research methods together. Numerous dissertation with variety of research subjects and methods would be expected to be followed to develop research on Home Economics Education.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.211-221
• /
• 1999

The ultrastructural changes of cuticular surface, excretory and digestive organs of Anisakis simplex larvae chronologically recovered from experimental cats were observed with a SEM and TEM. The larva recovered from an experimental cat at 3 days post-infection (PI) retained the cuticular surface with regular transverse striations and a longitudinal groove on the lateral side of body. This finding suggests that the molting of the 3rd stage larva of A. simplex to 4th one occurred from the 3rd day after infection in cats. The excretory organ (renette cell) consisted of a large cell with numerous ductules ramified from the main duct, mitochondria and secretory granules in cytoplasm. Secretory granules in the renette cell of larvae recovered at 24 hours PI were round whereas those of control and larvae recovered at 6 hours PI were amorphous. Muscular esophagus and ventriculus also retained many secretory granules in the cytoplasm. The secretory granules in these organs of larvae recovered at $6\sim24$ hours PI were electron-dense and widely distributed whereas those of control worm were packed in a pocket and retained various electron densities. In the cytoplasm of intestinal epithelial cells, numerous fine glycogen particles and mitochondria were distributed. The chronological changes of secretory granules in renette cell, muscular esophagus and ventriculus seem to be related with the worm penetration into host tissue.

• Applied Microscopy
• /
• v.37 no.2
• /
• pp.93-102
• /
• 2007

Secretory leukocyte protease inhibitor (SLPI) was known as one of bacterial lipopolysaccharide (LPS)-induced products of macrophage. Macrophages play an important role in the development of inflammatory responses by secreting an array of cytokines and chemokines in a tissue microenvironment. To identify the function and relationship between potent growth factors and SLPI after LPS stimulation, we conducted reverse transcriptase polymerase chain reaction (RT-PCR) and Western blots for the detection of mRNA and protein expression of SLPI and growth factors such as VEGF, PDGF, bFGF after 100 ng LPS stimulation on the RAW264.7 cells. The result of RT-PCR was showed SLPI mRNA expression was increased from 60 min to 48h in RAW 264.7 cells after incubation with LPS. VEGF and PDGF mRNA was expressed highly at initial stage by LPS stimulation. The mRNA of bFGF and type I collagen was very weakly expressed after LPS stimulation. SLPI protein level was increased likely the mRNA levels in RAW 267.7 cells. Additionally, phase contrast and scanning electron microscopic observation demonstrated that the LPS induce the change of morphology of the RAW264.7 cells. From these results, it suggest that expression of SLPI by LPS treatment may associate with VEGF and PDGF expression in RAW264.7 cells.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.376-381
• /
• 2008

Anthocyanin contents of black soybean were analyzed for development of superior breeding lines with high anthocyanin contents. Total 292 genotypes of black soybean collected through the whole country were analyzed by HPLC in which C3G (Cyanidin-3-Glucoside), D3G (Delphinidin-3-glucoside), and Pt3G (Petunidin-3-Glucoside) were detected main anthocyanin pigments and each pigment contents were significantly different according to genotypes. C3G content showed the highest value in all materials and its variation was also wide, whereas D3G and Pt3G were not detected in 4 and 24 genotypes. Mean value of C3G, D3G, and Pt3G contents were $8.05{\pm}4.225$, $1.80{\pm}0.854$, and $1.15{\pm}0.781\;mg/g$, respectively. In case collected sites, genotypes collected in Chungnam region were higher the anthocyanin contents than other collections, which was $13.75{\pm}3.861\;mg/g$. It might be concluded that it takes more than 36 days for anthocyanin accumulation since beginning of seed-coat pigments formation, in that case it showed $13.09{\pm}4.190\;mg/g.$. Also total anthocyanin contents were present higher concentration in seed coat as maturation period was longer from flowering stage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.336-343
• /
• 2019

Wet direct-seeding (WDS) is an important method for improving the competitiveness of rice production in South Korea. We analyzed the optimum direct-seeding date to establish the rice standing rate in each area and selected suitable areas for WHS by considering the heading stage limit date for improving cultivation safety. As a result, the rice direct-seeding date to control weedy rice was around 5.15, 5.17-5.19, and after 5.20 in southern Youngnam, southern Honam, and the Middle Coast areas, respectively. However, the optimum seeding date for good standing rice was in late March in most areas. Analyzing by area, most of the southern plains and parts of the central inland plain are suitable for WHS. However, most parts of Gwangwon-do, and the northern parts of Chungbuk, Gyeongbuk, and Yeonghonam areas are not suitable for WHS, and should therefore avoid WHS.

• Economic and Environmental Geology
• /
• v.3 no.1
• /
• pp.25-34
• /
• 1970

Very few articles are available on geologic structure and genesis of Sangdong scheelite-deposits in spite of the fact that the mine is one of the leading tungsten producer in the world. Sangdong scheelite deposits, embedded in Myobong slate of Cambrian age at the southem limb of the Hambaek syncline which strikes $N70{\sim}80^{\circ}W$ and dips $15{\sim}30^{\circ}$ northeast, comprise six parallel veins in coincide with the bedding plane of Myobong formation, namely four footwall veins, a main vein, and a hangingwall vein. Four footwall veins are discontinuous and diminish both directions in short distance and were worked at near surface in old time. Hangingwall vein is emplaced in brecciated zone in contact plane of Myobong slate and overlying Pungchon limestone bed of Cambrian age and has not been worked until recent. The main vein, presently working, continues more than 1,500 m in both strike and dip sides and has a thickness varying 3.5 to 5 m. Characteristic is the distinct zonal arrangement of the main vein along strike side which gives a clue to the genesis of the deposits. The zones symmetrically arranged in both sides from center are, in order of center to both margins, muscovite-biotite-quartz zone, biotite-hornblende-quartz zone and garnet-diopside zone. The zones grade into each other with no boundary, and minable part of the vein streches in the former two zones extending roughly 1,000 m in strike side and over 1,100 m in dip side to which mining is underway at present. The quartz in both muscovite-biotite-quartz and biotite-hornblende-quartz zones is not network type of later intrusion, but the primary constituent of the special type of rock that forms the main vein. The minable zone has been enriched several times by numerous quartz veins along post-mineral fractures in the vein which carry scheelite, molybdenite, bismuthinite, fluorite and other sulfide minerals. These quartz veins varying from few centimeter to few tens of centimeter in width are roughly parallel to the main vein although few of them are diagonal, and distributed in rich zones not beyond the vein into both walls and garnet-diopside zone. Ore grade ranges from 1.5~2.5% $WO_3$ in center zone to less than 0.5% in garnet-diopside zone at margin, biotite-hornblende-quartz zone being inbetween in garde. The grade is, in general, proportional to the content of primary quartz. Judging from regional structure in mid-central parts of South Korea, Hambaek syncline was formed by the disturbance at the end of Triassic period with which bedding thrust and accompanied feather cracks in footwall side were created in Myobong slate and brecciated zone in contact plane between Myobong slate and Pungchon limestone. These fractures acted as a pathway of hot solution from interior which was in turn differentiated in situ to form deposit of the main vein with zonal arrangement. The footwall veins were developed along feather cracks accompanied with the main thrust by intrusion of biotite-hornblende-quartz vein and the hangingwall vein in shear zone along contact plane by replacement. The main vein thus formed was enriched at later stage by hydrothermal solutions now represented by quartz veins. The main mineralization and subsequent hydrothermal enrichments had probably taken place in post-Triassic to pre-Cretaceous periods. The veins were slightly displaced by post-mineral faults which cross diagonally the vein. This hypothesis differs from those done by previous workers who postulated that the deposits were formed by pyrometasomatic to contact replacement of the intercalated thin limestone bed in Myobong slate at the end of Cretaceous period.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.275-287
• /
• 2013

The Japanese anchovy Engraulis japonicus is a widespread species in the western North Pacific and major fishery resource. To understand the spatio-temporal variation of anchovy prey items in the coastal waters of southern Korea, the stomach contents of anchovy and the structure of the zooplankton community were analysed at three sites (Jindo, Yeosu and Tong-yeong) from July 2011 to February 2012. The main prey items in Yeosu and Jindo were cyprid stage of barnacle (>35%) and copepod Calanus sinicus (>22%) in July, respectively, while, predominant ones in Tongyeong were small copepods, Paracalanus parvus s.l. (41%) and Corycaeus affinis (22%). During this period, the dominant zooplankton were cladoceran Evadne tergestina (39%) in Yeosu, small copepod, P. parvus s.l. (28%) in Jindo and cladoceran E. tergestina (14%) in Tongyeong. The dominant prey items were barnacle larvae and copepods in summer, phytoplankton and Pseudodiaptomus marinus in autumn and P. parvus s.l. and cold water copepod, Centropages abdominalis in winter. Anchovy prefer the prey item C. sinicus (3%) over E. tergestina (39%), which was a dominant species in the catching site in summer. P. marinus (0.5%) and C. abdominalis (0.9%) were preferred over P. parvus s.l. (30%, 21%) in autumn and winter, respectively. Prey items varied with area and season in the coastal waters of southern Korea. These results suggest that the prey selectivity of anchovy showed high flexibility and adaptability in the study waters.

• 보존과학연구
• /
• s.32
• /
• pp.5-24
• /
• 2011

Neunghwaji(Embossed patterned paper) is a unique paper used for a traditional book cover in Korea. The research was carried out to investigate Neunghwaji's features. Physical property was studied through a test of tensile strength and folding endurance. Also, comparative analysis of virus resistance and waterproof ability was undertaken on Neunghwaji. 1. Folding endurance test showed that strength of non-embossed CB and HB decreased during deteriorating duration. Embossed CN and HN showed the strength increasing at early stage and decreasing from the 27th day of the deteriorating duration. Tensile strength was decreasing in both cases as deterioration progressed. 2. Growth of Arthrinium sp. fungus on embossed paper was 10% less than plain paper while Cladosporium sp. showed 20~30% less growth. Amur cork dyeing(H) showed 10~30% lower fungi growth than Gardenia seed dyeing(C). The result indicated that embossed paper has better virus resistance than Hanji, and Amur cork dyeing has better virus resistance than Gardenia seed dyeing. 3. Average contact angle of CN, CB, HN, and HB was $85{\sim}92^{\circ}$ and NON-N and NON-B was $59{\sim}63^{\circ}$. In detail, CN's contact angle was $1{\sim}7^{\circ}$ higher than CB's; HN was $1{\sim}6^{\circ}$ higher than HB. Therefore, it was found that embossed paper has higher contact angle than Hanji thus the former has better waterproof ability. The research suggested production technique of Neunghwaji and studied its features related to the technique. Neunghwaji was confirmed to have superior quality to Hanji though further study regarding above test result is needed to complement the research.