• 국제초고층학회논문집
• /
• 제1권2호
• /
• pp.99-105
• /
• 2012

The higher the building height and the larger the temperature difference between the outdoor and indoor space, the more remarkable is the draft driven by the stack effect in high-rise buildings. Moreover, the stack effect can bring about the deterioration of habitability and the degradation of the performance of the indoor control system in high-rise buildings. In this study, as a measure to attenuate the stack effect, the E/V shaft cooling method was proposed and its performance was compared with the conventional stack effect control method for strengthening the air-tightness of the building using a numerical simulation method. The total decreasing ratios on the stack effect in a building were compared, and the probabilities of the secondary problems were analyzed. The results show that the E/V shaft cooling is very effective to decrease the stack effect in a high-rise building in terms of the reduction performance and application. Moreover, this method does not cause secondary problems, such as stack pressure transition to other walls, unlike the conventional stack effect mitigation method.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.76-83
• /
• 2014

During PEMFC(Proton Exchange Membrane Fuel Cell) operation monitoring and diagnosis are important issues for reliability and durability. Stack defect can be followed by a critical cell voltage drop in the stack. One method for monitoring the cell voltage is CVM(Cell Voltage Monitoring), where all cells in the stack are electrically connected to a voltage measuring system and monitored these voltages. The other methods are based on the EIS(Electrochemical Impedance Spectroscopy) and on nonlinear frequency response. In this paper, intermodulation(IM) method for diagnosis PEMFC stack is introduced. To detect one or more critical PEMFC cell voltage PEMFC stack is excited by two or more test sinusoid current, and the frequency response of the stack voltage is analyzed. If one or more critical cell voltage exists, higher harmonics on the voltage frequency spectrum will appear. For the proposed IM method, stack simulation and experiments are conducted.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.99-103
• /
• 2002

It is the basic requirement of product characteristics to specify geometric dimensions and tolerances during design process of parts assembly. Therefore, there are many tolerance stack analysis method to explain tolerance zone. Tolerance stack analysis is to calculate gap using tolerances which includes geometric and coordinate dimension. In this study, we compared several different stack analysis method and try to suggest more general method called the Virtual Method to analyze tolerance stack.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.90.1-90.1
• /
• 2011

This technology is applicable to Electrical vehicle that using Energy from Hydrogen Fueled Cell. Electricity & water is got from chemical reaction between H2 & O2 in stack. This technology is used when fault diagnosis of Fuel cell is needed. It is General method that measure each cell's voltage of stack for fault diagnosis. but, this technology is method of measuring entire voltage of stack. For this reason, fault diagnosis system is simplified and cost of system is lower than previous one. In normal stack condition, characteristic graph of voltage-current has linearity. In fault stack condition, it has non-linearity. we use this characteristic to diagnosis of stack fault. In this technology, Specific frequency current is injected into stack & Stack voltage is measured in response. After that, stack voltage difference is analyzed to diagnosis of stack fault. Presently, Development of current injection module & basic program of THDA is finished. in future we will develop the technology of precise measurement technology about entire stack voltage.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.284-292
• /
• 2009

The stack-effect in high-rise buildings in winter causes many problems such as difficulties in opening or closing doors, infiltration, energy loss, noise and fire protection. Stack effect is influenced by temperature difference between the interior and exterior of building and the height of building. As an attenuation method for stack effect, the architectural methods are generally used. However, as though architectural methods were fully adopted, the problems are reported as ever in tall building. In this study, a new method to reduce stack effect will be suggested. As an active control method against the stack effect, E/V shaft natural cooling method is suggested. In this paper, the concept of E/V shaft natural cooling system and its reduction performance of stack effect by simulation and field measurement will be reported.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.36-43
• /
• 2005

It is the basic requirement of design process of parts assembly to specify geometric dimensions and tolerances of product characteristics. Among them, tolerance stack analysis is one of the important methods to specify tolerance zone. Tolerance stack analysis is to calculate gap using tolerances which includes geometric and coordinate dimensions. In this study, we suggested more general method called the virtual method to analyze tolerance stack. In virtual method, tolerance zone is formed by combination of dimensional tolerance, geometric tolerance and bonus tolerance. Also tolerance zone is classified by virtual boundary condition and resultant boundary condition. So gap can be defined by combination of virtual boundary and/or resultant boundary. Several examples are used to show the effectiveness of new method comparing to other methods.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.144-154
• /
• 2016

HT-PEMFC (high temperature polymer electrolyte membrane fuel cell) using PA (phosphoric acid) doped PBI (polybenzimidazole) membrane has been researched for extending the lifetime. However, the existing work on durability of HT-PEMFC focuses on identifying degradation causes of lab scale. The short life time of HT-PEMFC is still the problem for its commercialization. In this paper, an operating method to maximize life time of 5kW HT-PEMFC stack are proposed. The proposed method includes major steps such as minimization of OCV (Open Circuit Voltage) exposure, control of the proper stack temperature, and N2 purging for the stack. This long life operating method was based on the fragmentary results of degradation from previous research works. Experimentally, the 5 kW homemade HT-PEMFC stack was operated for a long time based on the proposed method and the stack successfully can operate within the desired degradation rate for the target life time.

• 지구물리와물리탐사
• /
• 제8권2호
• /
• pp.163-169
• /
• 2005

속도중합을 역산을 이용하면 탄성파 자료처리에서 있어서 다양한 처리가 가능하므로, 이 분야는 최근에 들어 매우 유용한 영역으로 주목을 받고 있다. 이러한 다양한 처리에 속도중합 역산을 응용하기 위해서는 사용하는 역산이 잡음에 강하면서도 고해상도의 속도중합 결과를 얻을 수 있어야 한다. 이러한 성질을 갖는 역산 방법들 중에서 가장 성공적인 방법 중의 하나라고 볼 수 있는 반복적 가중의 최소자승법(Iteratively Reweighted Least-Squares: IRLS)의 이론적 배경과 구현 방법을 소개하고, 기존 기술 특성과 한계성을 살펴보았다.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.14-20
• /
• 2011

건축물이 고층화되면서 피난을 위한 주요 시설인 피난계단에서는 수직적 구조로 인해 연돌효과의 영향이 크게 발생하고 있다. 동절기에 연돌효과로 인한 계단실의 압력상승으로 피난문을 열고 대피하는데 어려움이 있고, 피난계단의 연기안전을 위한 급기가압 제연시스템의 운전성능에 교란이 발생되기 때문에 피난계단에서의 연돌효과를 저감시켜야 더욱 안전한 대피환경을 제공할 수 있다. 본 연구에서는 고층 건물에서의 현장실험을 통해 피난계단에서의 연돌효과를 저감시킬 수 있는 방안을 도출하였고, 네트워크 모델을 사용한 수치해석을 수행하여 정량적이고 상세한 설계방안을 제시하였다. 현장실험 결과 피난계단의 저층부에서 피난계단으로 공기가 급기되고 고층부에서 피난계단의 외부로 공기가 배기되도록 공기의 흐름을 생성시켜 준다면 고층 건물의 피난계단에서의 연돌효과가 저감될 것으로 예측된다.

• 화약ㆍ발파
• /
• 제40권2호
• /
• pp.15-24
• /
• 2022

최근 노후화로 불용되는 산업구조물의 해체 수요가 증가하면서 산업구조물 해체에 대한 관심이 부각되고 있으며, 해체된 산업부지를 원래 자연의 모습으로 복원하는 공사가 주요 이슈로 부상하고 있다. 본 시공사례는 구조적 노후화와 기능적 요건을 만족하지 못하는 산업용 연돌 해체에 발파해체공법 중 전도공법을 적용하였다. 해당 연돌은 높이 150.0m이고, 연돌 외벽이 철근콘크리트 셸 구조물이며, 내부 연통은 스틸 셸 구조물인 복합구조물이다. 발파해체결과, 연돌은 예측된 방향으로 정확히 전도하였고, 주변 시설물에 피해 없이 발파해체를 완료하였다.