• 한국콘텐츠학회논문지
• /
• 제4권1호
• /
• pp.1-7
• /
• 2004

오늘날 무선통신 기술은 기존 유선 통신방식에 추가하여 매우 주목받고 있는 정보통신 혁명을 주도하였다. 무선 통신에서 자체 피코넷(piconet)을 형성하여 음성이나 데이터 통신을 수행하는 블루투스 기술은 많은 응용분야에 적용되고 있으며, 나아가 액세스 망을 통해 공중망과 접속 가능하게 되었다. 본 논문에서는 블루투스 프로토콜의 기술교육을 위하여 프로토콜 스택의 핵심인 HCI, L2CAP, RFCOMM, SDP와 프로파일의 핵심인 GAP, SPP, GEOP, FTP을 모니터링 및 에뮬레이션하기 위한 프로그래밍 기법의 제반 환경을 체계적이고 쉽게 서술하였다. 이러한 기능은 블루투스 디바이스와 RS-232-C, BSB 또는 UART 인터페이스로 접속된 PC 환경에서 비주얼 C로 작성된 응용 프로그램으로 수행되며, 블루투스 디바이스에 실장된 펌웨어와 인터페이스를 수행하여 개발되었다. 아울러 개발된 소프트웨어를 활용하여 파일 전달 및 채팅 기능을 부가적으로 제공하여 교육의 효율을 높이고자 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.929-932
• /
• 2014

We explored interfacial electronic structures in indium tin oxide (ITO)/DNTPD/N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4'-diamine (NPB) layer stack in an OLED to clarify the real role of an aromatic amine-based hole injection layer, DNTPD. A hole injection barrier at the ITO/DNTPD interface is lowered by 0.20 eV but a new hole barrier of 0.36 eV at the DNTPD/NPB is created. The new barrier at the DNTPD/NPB interface and its higher bulk resistance serve as hole retardation, and thus those cause the operation voltage for the ITO/DNTPD/NPB to increase. However, it improves current efficiency through balancing holes and electrons in the emitting layer.

• Preventive Nutrition and Food Science
• /
• 제7권4호
• /
• pp.411-416
• /
• 2002

The effects of electrodialysis (ED) alone or ED plus ultrafiltration (UF) on deacidification of mandarin orange juice were studied by using a commercial ED stack with ion exchange membranes. ED processing, reduced the total acidity of the juices by 30% (0.6~0.7% as total acidity) after 50 min and by about 60~70% (0.23~0.4% as total acidity) after 100 min, as compared to the control juice. However, the acidity reduction after 50 min of ED was determined to be suitable, when considering total acidity (0.6~0.7%, w/w) and current efficiency. There was no color change in the juices following ED, and the pH and Brix were only slightly decreased. Furthermore, ascorbic acid and citric acid concentrations showed only minor decreases, and amino-N, free sugar, and flavonoid contents remained almost unchanged. Therefore, we concluded that the nutritional integrity of the juice was maintained. ED combined with UF may be effective, not only in preventing membrane fouling, but also in preserving the nutrients, such as ascorbic acid, in citrus juice.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권3호
• /
• pp.166-173
• /
• 2009

The reliability of hafnium oxide gate dielectrics incorporating lanthanum (La) is investigated. nMOSFETs with metal/La-doped high-k dielectric stack show lower $V_{th}$ and $I_{gate}$, which is attributed to the dipole formation at the high-k/$SiO_2$ interface. The reliability results well correlate with the dipole model. Due to lower trapping efficiency, the La-doping of the high-k gate stacks can provide better PBTI immunity, as well as lower charge trapping compared to the control HfSiO stacks. While the devices with La show better immunity to positive bias temperature instability (PBTI) under normal operating conditions, the threshold voltage shift (${\Delta}V_{th}$) at high field PBTI is significant. The results of a transconductance shift (${\Delta}G_m$) that traps are easily generated during high field stress because the La weakens atomic bonding in the interface layer.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.574-583
• /
• 2008

The results of HAPs emission data using TRI (Toxic Release Inventory), SODAM (Source Data Management system) were investigated and the emissions of 7 heavy metals from their sources and emission processes were also analyzed. Questionnaire for source data analysis as well as the stack sampling were carried out for 17 factories among 6 selected industrial types. The annual amount of emissions was estimated based on the measured concentration and flow rates. All sources were operated with high efficiency control devices and the concentration levels of all heavy metals were shown to be below 0.1 to of regulation standard. The highest emission source of heavy metals was steel manufacturing industry with the annual emission of 342.9 kg/yr and followed by hazardous waste incinerator, paint manufacturing, nonferrous metal manufacturing, rolling & press goods manufacturing and storage battery manufacturing. In the case of Hg, the emissions were quite significant from electric acros of steel manufacturing industry, although the concentration level was below the emission standard, showing the necessity of specific care for its management.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.287-288
• /
• 2010

The Induction Heating equipment is widely used for steel plate heating in the surface treatment process of steel industries. In the case of thin steel plate, for high efficiency We need the high frequency induction heating equipment more than 100kHz. But it is difficult to realize the high frequency and high power at the same time. That's why most high frequency equipment more than 100kHz has been imported from advanced Manufacturer. This paper will describe the development of 100kHz/5MVA inverter module for 100kHz/20MVA induction heating. We used the LCL resonance topology and ZVS/ZCS switching technology. And we also developed the low loss gate drive board and plate busbar inverter stack. We proved the performance by various experiment.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.164-169
• /
• 2005

The micro-gripper system is one of the systems that should be improved in the respect of performance for practical usage. In the previous works, the important issues are considered and presented using axiomatic design approach. In this paper, the functional requirements and design parameters are evaluated in order to improve the performance and efficiency of the system. The evaluation is a very difficult task since many variables are related to the outcomes. To provide a basis for correct design decisions, axiomatic design principles have been advanced. Since the framework of axiomatic design makes design issues easier to understand when they are analyzed, we used those as an evaluation tool. The object of the system is to handle micro-size parts. Main device is a micro-gripper using two bender-typed and one stack-typed PZTs as actuators. And it has three tips made of tungsten wires fur holding function. Also the system must satisfy other functional requirements for appropriate handling performance. The results of this study show design improvements of micro-gripper system such as structural change of gripper, additional element, and integration of physical parts. Axiomatic design guides presented suitable design parameters corresponding to functional requirements and made the design elements improve through diagrams of whole system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.92.1-92.1
• /
• 2011

Anode off-gas of high temperature fuel cells such as MCFC contains a significant amount of combustible components like hydrogen, carbon monoxide and methane according to fuel utilization ratio of the fuel cell stack. Thus, it is important to fully burn anode off-gas and utilize the generated heat in order to increase system efficiency and reduce emissions as well. In the present study, 25 kW catalytic combustor has been developed for the application to a load-following 300kW MCFC system. Mixing and combustion characteristics have been experimentally investigated with the catalytic combustor. Since the performance of catalytic combustor directly depends on the combustion catalyst, this study has been focused on the experimental investigation on the combustion characteristics of multiple catalysts having different structures and compositions. Results show that the exhaust emissions are highly dependent on the catalyst loading and the ratio of catalytic components. Test results at load-following conditions are also shown in the present study.

• 한국ITS학회 논문지
• /
• 제7권1호
• /
• pp.75-83
• /
• 2008

본 논문은 DSTM (Dual Stack Transition Mechanism) 서비스를 제공하기 위해 필요한 구성 요소 중에서 DTI (Dynamic Tunnel Interface)를 통한 IPv4 over IPv6 터널에 대해 분석한 후 요소기술 및 기능들을 정의하여 적합한 모듈을 설계하여 구현하였다. 그리고 구현된 IPv4 over IPpv6 터널이 실제 서비스될 수 있는지를 확인하기 위해 다양한 환경에서 기존의 6over4 서비스와 IPv4 트래픽과의 성능 비교 분석을 위한 실험 후 결과를 제시하였다. 제시된 결과는 IP6 터널 헤더에서의 checksum 계산의 불필요성에 따른 지연 감소 등으로 6over4 서비스보다는 우수한 성능을 나타내었다

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.678-685
• /
• 2011

An Ejector enhances system efficiency, are easily operated, have a mechanically simple structure, and do not require a power supply. Because of these advantages, the ejector has been applied to a variety of industrial fields such as refrigerators, power plants and oil plants. In this work, an ejector was used to safely recycle anode tail gas in a 75-kW Molten Carbonate Fuel Cell (MCFC) system at KEPCO Research Institute. In this system, the ejector is placed at mixing point between the anode tail gas and the cathode tail gas or the fresh air. Commercial ejectors are not designed for the actual operating conditions for our fuel cell system. A new ejector was therefore designed for use beyond conventional operating limits. In the first place, a few sample ejectors were manufacured and the entrainment ratio was measured at a dummy stack. Through this experiment, the optimum ejector was chosen. The 75-kW MCFC system equipped with this optimum ejector was operated successfully.