• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.106-111
• /
• 2003

This study made an experiment On fatigue crack propagation da/dn, stress intensity factor range ${\Delta}K$ respectively in room temperature and in low temperature. And we got the following characteristics from fatigue crack growth test carried Out in the environment of room temperature and law temperature at $25^{\circ}C$, $-60^{\circ}C$, $-80^{\circ}C$, and $-100^{\circ}C$ in the range of stress ratio of 0.3 by means of opening made displacement. The threshold stress intensity factor range ${\Delta}Kth$ in the early stage of fatigue crack growth (Mode I) and stress intensity factor range ${\Delta}K$ in the stable of fatigue crack growth (Made II) was decreased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at law temperature and high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.61-67
• /
• 2014

Since the most of the existing non-Newtonian models are not adequate to apply to the lattmce Boltzmann method, it is a challenging task from both the theoretical and the numerical points of view. In this research the hydro-kinetic model was modified and applied to the 3-D moving sphere in the circular channel flow and the characteristics of the shear thinning effect by the HK-model was evaluated and the condition of ${\Gamma}$ in the model was suggested for the stable simulation to generate non-trivial prediction in three dimension strong shear flows. On the wall boundaries of circular channel the curved wall surface treatment with constant velocity condition was applied and the bounceback condition was applied on the sphere wall to simulate the relative motion of the sphere. The condition is adequate at the less blockage than 0.7 but It may need to apply a multi-scale concept of grid refinement at the narrow flow region. to obtain the stable numerical results.

• 에너지공학
• /
• 제8권2호
• /
• pp.233-241
• /
• 1999

온수생산을 위하여 기존의 강제순환식이 아닌 자연순환식 회로를 이용한 대형 온수생산 시스템을 개발하였다. 그리고 이 시스템의 설계와 성능평가를 위한 시뮬레이션 프로그램을 개발하여 실용화 가능성을 제시하였다. 실제규모의 성능실험에서 주어진 기하학적 조건하에 시스템이 정상상태 운전 시 보일러 가열량(695㎾)일 때, 급수 유량이 0.3$\ell$/s 로 일정하게 순환함을 보였다. 그리고, 비정상상태로 작동 할 경우 순환유량이 0.4~0.6 $\ell$/s 로 시스템이 불안정함을 실험을 통해 확인하였다. 개발된 프로그램과 대형의 온수생산 시스템의 성능평가의 비교.검증을 통하여 시뮬레이션 프로그램을 이용한 시스템 설계에 적용될 수 있음을 보였다.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.159-164
• /
• 2007

The purpose of this study is to reduce harmful emission gases in the range of stable combustion without loss of a thermal efficiency. Therefore, effects of both exhaust gas recirculation(EGR) and synthetic gas addition on engine performance and emission were investigated in a gasoline engine. Synthetic gas(syngas), which is in general prepared from reforming gasoline, was utilized in order to promote stable combustion. The major components of syngas are H2, CO and $N_2$ gases. The percentage of syngas addition was changed from 0 to 30% in energy fraction and EGR rate was varied up to 30%. As a result, $COV_{IMEP}$ as a parameter of combustion stability was decreased and THC/$NO_X$ emissions were reduced with the increase of syngas addition. And $COV_{IMEP}$ was increased with the increase of EGR but $NO_X$ emission was greatly reduced. In addition, under the region where the EGR rate is around 20%, thermal efficiency was improved.

• 한국멀티미디어학회논문지
• /
• 제6권7호
• /
• pp.1302-1311
• /
• 2003

본 논문에서는 삼각 메쉬에 관한 보다 안정되고 직관적인 새로운 다중해상도 메쉬 편집 기술을 제안한다. 본 논문의 기본 아이디어는 3차원 메쉬 상에서 편집 영역을 선택하여 2차원 영역으로 임베딩을 하는 과정과 사용자에 의해서 정의되는 편집 정보를 보간하는 곡면을 생성하는 과정으로 이루어지며, 이를 통해 편집 영역 안에 있는 다른 꼭지점의 변위 정보를 곡면 함수값으로부터 생성한다. 본 논문에서 사용되는 임베딩 방법은 확장 볼록 조합 매개변수화 방법으로서 임베딩된 2차원 메쉬의 삼각형들은 자기 교차를 하지 않으며 또한 볼록 조합 계수를 정의할 때 모양 유지 방법을 사용하기 때문에 3차원 삼각형의 모양을 제대로 유지할 수 있다. 또한 편집 결과의 영역을 조절할 수 있도록 하기 위하여 다단계 B-스플라인 곡면을 이용하여, 상호작용적이며 직관적이어서 보다 안정되고 효율적인 메쉬 편집 결과를 얻을 수 있다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1565-1577
• /
• 2016

For grid-connected LCL-filtered inverters, dual-loop current control with an inner-loop active damping (AD) based on capacitor current feedback is generally used for the sake of current quality. However, existing studies on capacitor current feedback AD with a control delay do not reveal the mathematical relation among the dual-loop stability, capacitor current feedback factor, delay time and LCL parameters. The robustness was not investigated through mathematical derivations. Thus, this paper aims to provide a systematic study of dual-loop current control in a digitally-controlled inverter. At first, the stable region of the inner-loop AD is derived. Then, the dual-loop stability and robustness are analyzed by mathematical derivations when the inner-loop AD is stable and unstable. Robust design principles for the inner-loop AD feedback factor and the outer-loop current controller are derived. Most importantly, ensuring the stability of the inner-loop AD is critical for achieving high robustness against a large grid impedance. Then, several improved approaches are proposed and synthesized. The limitations and benefits of all of the approaches are identified to help engineers apply capacitor current feedback AD in practice.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.71-82
• /
• 1999

비선형 동역학계의 불규칙한 운동은 그 계가 가지는 고유한 특성에 의해 생기는 현상으로써 때로는 예측할 수 없는 큰 운동이 발생한다. 해상 운행중인 선박의 경우 이러한 예측치 못한 큰 운동으로 인해 전복이 일어나기도 하므로, 비선형 선박 안전성 확보라는 관점에서 중요하게 다루어져야 한다. 본 연구에서는, 첫째로 임의의 구간 안에 있는 모든 초기 조건에 대해 선박 운동의 안정성을 파악하여 안정과 불안정으로 영역 구분을 시켜 주는 흡인 영역(basins of attraction)을 외력변화에 따라 그려 봄으로써 선박 운동에 대한 안정 영역의 정성적인 변화 과정을 파악하고자 하였다. 둘째로 전복이 일어나지 않는 안정 영역상을 초기 조건으로 한 선박 운동이 최종적으로 어떤 운동이 되는지 알아 보았다. 마지막으로 외력 변화에 따른 비선형 선박 운동 중 혼돈적 현상이 일어나는 운동에 대해서는 이를 상세히 분석하고자 과도상태가 지난 운동의 주기적 변화를 외력 변화에 따라 살펴보는 분기도(bifurcation diagram)를 이용하여 연구해 보았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1456-1458
• /
• 1998

The $(Sr_{1-x}Ca_x)TiO_3(SCT)$ thin films were deposited at various substrate temperature using rf magnetron sputtering method on optimized Pt-coated electrodes ($Pt/TiN/SiO_2/Si$). The dielectric constant changes almost linearly in the temperature region of $-80{\sim}+90[^{\circ}C]$, the temperature characteristics of the dielectric loss exhibited a stable value within 0.1. The capacitance characteristics appears a stable value within ${\pm}5$[%]. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz]. Dielectric constant of SCT thin films deposited on Si wafer substrate are larger with the increase of deposition temperature.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.569-572
• /
• 2006

In present study, the influence of changing combustor pressure on flame stabilization and nitrogen oxide (NOX) emission in the swirl flame with secondary fuel injection was investigated. The combustor pressure was controlled by suction at combustor exit. Pressure index ($P^*=Pabs/Patm$), where Pabs and Patm indicated the absolute pressure and atmosphere pressure, was controlled in the range of 0.7~1.15 for each equivalence ratio conditions. It could be observed that flame stable region became narrower with decreasing equivalence ratio and pressure index. In this combustion system, stable flames were formed until $P^*=\;0.7$. Emission index decreased with decreasing pressure index for overall equivalence ratio conditions and NOx reduction rates were almost identical for $P^*<1$ regardless of equivalence ratio though EINOx values showed different level with change of equivalence ratio for $P^*{\geq}1$. It is also observed that EINOx decreased with increasing secondary fuel injection ratio. Emission index of nitric oxide was controllable by adjusting the changing combustor pressure and injecting secondary fuel and this NOx reduction technology is applicable to industrial furnaces and air conditioning system.

• 농촌계획
• /
• 제23권1호
• /
• pp.97-112
• /
• 2017

Stability of labor market in rural areas was analyzed in this paper with categories of industrial group, employment scale, surviving period, and founder group. The stability of each classified labor market was compared with each other to figure out the stable business class and the unstable class in rural areas. The results of rural areas were compared with those of urban areas. The stability was analyzed with average and coefficient of variation (C.V.) of annual total employees' change rates. It was revealed that labor market of 'primary industry', including agriculture, is unstable. Especially, labor market of 'mid-size' and 'primary industry' businesses founded as 'incorporated company' in rural areas is vulnerable. While labor market of 'large-size' is proved to be unstable, it is confirmed that 'small-size' or 'mid-size', and 'over-ten-year survived' businesses have positive contribution to the stable labor market in rural and urban areas. The results show that the stability of labor market is different in each category of business and in each region of rural or urban area. It is expected that the results can be utilized for the regional development policies, of labor and industry part.