• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.527-532
• /
• 1992

The present paper describes temporal changes of immunohistochemical localization and quantities of carbonic anhydrase isozyme II (CA-II) prochymosin (PC) and pepsinogen (PN) in goat's abomasal mucosae during long term milk feeding. The CA-II was not detected by day 14 after birth and then became positive on day 34 in the parietal cells, suggesting that the excretion of the hydrochloric acid (HCl) begins between days 14 and 34 under a feeding condition without solid materials. The quantity of the PC in the gastric chief cells detected by the ELISA showed rapid increase from the day of birth, making a peak on day 8 and then gradually decreased with age. The decrease in quantity of PC became started during the time period when HCl excretion had not started yet. The quantities of PN in the gastric chief cells were almost stable during the whole period examined. Expressions of these gastric enzymes did not seem to be regulated by the change of feeding condition.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1708-1714
• /
• 2011

AT feeding system of the electric railway system is installed every about 10km at between the feeder and catenary in parallel and the mid-point of the transformer is connected to the rail The supply voltage of this system is doubled than rolling stock voltage. So the voltage drop is smaller than usual. And the other merit of this system is the decreasing inductive disturbance to the communication line because of the reduced current in rail which runs reversed in a point of view of rolling stock. Also, ATP(Auto Transformer Post) is installed to reduce the voltage drop and to mitigate the inductive disturbance, but still now the proper distance between the ATP and AT feeding system is not established which ranges from 2 to 10[km]. The stable result of simulation(which is set that the end of the line AT is installed) to the voltage drop and inductive disturbance can not analyzes the effect to the supply system due to the ATP. This paper analyzes the effect to the system depending on the location of ATP by forecasting the voltage drop and inductive disturbance.

• Journal of Ecology and Environment
• /
• 제29권2호
• /
• pp.165-169
• /
• 2006

As a Biodiversity Management Plan in S. Korea, barley fields are being prepared for the wintering migratory birds. However, the effectiveness of barley fields as a feeding habitat has not been evaluated. In 2003/04 wintering period, we installed exclosures in the barley fields to evaluate the waterfowl grazing effectiveness. Approximately 8,000 waterfowls used the Dongup Reservoir System and utilized the barley fields during the daytime. The white-fronted goose Anser albifrons occupied more than 90% of the all barley-feeding waterfowls. Waterfowls significantly impacted to the shoot density and biomass of barley. In the closed plot, barley shoot density gradually increased to $267{\pm}27/m^2$ in January, 2004. Shoot density in open plots (site 1) declined sharply from.15 December ($189{\pm}18/m^2$) to 5 January 2004 ($25{\pm}11/m^2$). However, barley shoot density in open plots (site 2) was stable in January 2004 because of human disturbances. The changes in barley biomass and shoot density showed similar trend in both open and closed plot. From the exclosure experiment, it was clear that barley fields were important feeding habitat for wintering waterfowls in this area. Further, human disturbances such as noise from traffic and other human activities (farming and hiking) had significant impact on waterfowls' grazing activity. Collectively, winter barley fields were effective for waterfowl feeding, but the location of barley fields should be carefully selected for the maximum utilization of the barley feeding.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.170-178
• /
• 2005

Multi-hole type oxygen combustion burner was developed for industrial gasification and smelting furnace. We investigated characteristics of flame, radiation transfer, and soot emission in the convectional oxygen burner with respect to the feeding condition of fuel and oxygen. Regarding the results of the conventional burner, we designed new burners which have larger fuel consumption rate and radiation heat transfer. We changed the size and hole number and shape of the exit plane of the burner. In addition, the performance of the burner was tested with respect to the feeding condition of the fuel and air: Normal Diffusion flame(NDF) and Inverse Diffusion Flame(IDF). We investigated the flame configuration, radiation heat transfer, and soot formation by using a CCD camera, heat flux meter, and Laser Induced Incadescence(LII), respectively. The stable operating condition was obtained by the flame configuration and the flame of the burner which has dented exit plane was more stable in whole operating conditions. The characteristics of radiative heat transfer were sensitive to the feeding condition of reactants and the flame of 75% primary oxygen and 25% secondary oxygen of the IDF case shows maximum radiation heat transfer. The soot volume fraction of the flame was measured in the axial direction of the flame and the amount of soot volume fraction is proportion to the radiation heat transfer. As a result, we can get the optimal operating condition of the newly designed burner which enhances the characteristics of flame stabilization and radiation heat transfer.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.634-641
• /
• 2017

본 연구는 감각통합치료가 감각처리능력의 어려움을 가진 지적장애아동의 사회행동과 식사하기에 미치는 효과를 알아 본 사례연구이다. 연구기간은 2016년 9월부터 12월이며, 개별실험연구 방법 중 ABA 설계를 사용하였고 각각 2회기, 9회기, 2회기로 총 13회기 진행하였다. 감각통합프로그램은 50분씩 9회기 진행하였고 윌버거프로토콜(Wilbarger's Protocol)을 하루 2~3회씩 실시하였다. 아동의 기초적 발달 수준을 알기 위해 영역별 관찰 평가와 사회성숙도검사를 초기에 실시하였다. 아동의 감각처리능력을 알아보기 위해 감각프로파일(Sensory Profile: SP)을 실시하였으며 일상생활수행능력과 작업수행 능력정도를 일상생활평가(Functional Independence Measure for children; WeeFIM)와 캐나다작업수행측정(Canadian Occupational Performance Measure;COPM)을 통해 각각 평가하였다. 아동의 사회행동인 탐색행동과 식사하기는 관찰을 통해 측정하였다. 연구결과 감각통합프로그램이 아동의 사회행동을 증가시키고 식사하기를 가능하게 하는데 긍정적인 효과가 있었다. 아동의 식사하기는 중재 후 5회기부터 안정적으로 가능하였으며, 탐색행동은 중재 후 3주 후부터 변화를 보이기 시작해 7주 후 부터는 안정적인 탐색행동을 나타냈다. 이러한 결과는 감각처리능력에 어려움을 가진 지적장애아동이 일상생활에서 겪는 어려움을 중재하는데 감각통합프로그램이 효과적임을 말해 준다.

• Tribology and Lubricants
• /
• 제6권1호
• /
• pp.74-81
• /
• 1990

The threshold of instability for a rigid rotor supported in externally pressurized airlubricated circular or non-circular journal bearings of finite length is theoretically analyzed. The analysis is performed for a bearing having one feeding plane, no recess volume, which is assumed to be a line source, and is based on a first order perturbation of journal center motion about steady state position. And then linearized system dynamic analysis is carried out. Numerical results are given, showing the threshold of instability as a function of supply pressure ratio, feeding parameter and load. It is shown that the region that 2-lobe bearing is more stable than circular bearing exists and whirl ratio of 2-lobe bearing is less than that of the other types of bearing.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.36-40
• /
• 2003

In order to discuss the availability of aerostatic guideways driven by the coreless linear motor to ultra precision machine tools, a prototype of guideway is designed and tested in this research. A coreless linear DC motor with the continuous force of 156N and a laser scale with the resolution of $0.01\mu\textrm{m}$ are used as the feeding system. The experiments are performed on the static stiffness, motion accuracy, positioning accuracy, microstep response and variation of velocity. The guideway also has $0.21\mu\textrm{m}$ of positioning error and $0.09\mu\textrm{m}$ of repeatability, and it shows the stable response against the $0.01\mu\textrm{m}$ resolution step command. The velocity variation of feeding system is less than 0.6%. From these results, it is confirmed that the aerostatic guideway driven by the coreless linear motion is very useful for the ultra precision machine tools.

• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.29-35
• /
• 1988

When low sliding velocities in the boundary lubrication range are operating, irregular movements frequently occur which are a result of the stick-slip phenomenon. Such slide motions are undesirable in precision machine tools, particularly with feed back systems used in numerical and adaptive control machine tools. Accordingly, this paper reports analytical and experimental studies in the stick-slip characteristic of machine tool feeding system. The main conclusions of this study are as follows; The tendency towards stick-slip effects may be reduced by; 1). Reducing the drop in friction coefficient in the Stribeck curve(on the rising part of the friction characteristic at higher sliding speeds, the system is stable all the time) 2). Reducing the transition velocity by the use of a higher viscosity lubricating oil. 3). Increasing the stiffness(Damping)and reducing normal load(Sliding mass) Therefore, the Critical velocity is decided from the above conclusions and in designing of machine tool, feed rates(sliding velocity)must be design the more than critical velocity.

• 한국수산과학회지
• /
• 제34권6호
• /
• pp.605-610
• /
• 2001

이 연구에서는 해산어의 종묘 생산 과정에서 rotifer의 다음 단계 먹이생물로 이용되고 있는 Artemia의 대체 먹이생물로서 Diaphanosoma celebensis의 배양 환경 중 염분 농도가 미치는 영향을 검토하였다. 염분 농도 0 ppt에서 45ppt 사이에서 5 ppt 간격으로 염분 조정된 10단계의 조건하에서 D. celebensis의 증식 밀도, 안정배양 가능정도 (RPGI: Relative Population Growth Index) 그리고 먹이섭 이력 (RCN; Remaining Cell Numbers)을 비교 검토하였다. 그 결과, 염분 농도 0ppt에서 45ppt까지 10단계의 염분 배양 환경하에서 가장 높은 증식 밀도, 안정 배양도 (RPGI) 그리고 양호한 섭이력 (RCN)이 관찰된 실험구는 염분 농도 20ppt였으며, $15\~35ppt$의 염분 배양 환경하에서도 비교적 안정적인 배양 결과가 관찰되었고 20ppt를 중심으로 저염분 또는 고염분 배양 조건으로 갈수록 증식, RPGI 그리고 RCN은 저하되는 경향이 뚜렷하였다. 그리고 염분 농도 0ppt에서는 실험 개시 직후 전 개체가 사망하였다. 이 연구 결과 D. celebensis는 해산어의 종묘 생산 과정에서 Artemia의 대체 먹이생물로 광범위한 염분 농도 범위하에서 비교적 손쉽게 배양 가능할 것으로 판단되었다.

• 아시안잔디학회지
• /
• 제25권1호
• /
• pp.94-99
• /
• 2011

본 연구는 잔디 관리에서 엽면시비를 통해 나타나는 잔디의 생육 및 품질을 조사하여, 잔디 관리 정보를 제공하고자 수행되었다. 연구 결과, 엽면시비 후 잔디의 시각적 품질 및 밀도, 클로로필 함량이 높아졌다. 잔디밀도는 대조구에 비해 평균 2.8개/$cm^2$ 높았으며, 여름철 장마기에는 평균 3개/$cm^2$ 이상 높았다. 또한, 벤트그래스 그린에서 시각적 품질 및 클로로필 함량, 식생지수가 1년 내내 균일하게 유지되었으며, 갱신작업이나 건조피해 후에도 관주시비 처리구의 잔디보다 엽면시비 처리구의 잔디 회복속도가 현저히 빠른 것을 확인할 수 있었다. 본 결과를 통해 엽면시비가 잔디의 지상부에 영양분을 신속하게 제공하여 잔디 생육을 단기간에 높이는 효과가 있다는 점을 알 수 있었으며, 이는 잦은 잔디 깎기로 양분의 유실이 많은 그린에서 유용하며, 특히 뿌리 길이가 짧아 시비의 효과가 낮은 하절기의 그린관리에 매우 실용적인 관리프로그램이 될 것으로 예상된다. 하지만, 본 연구에서 잔디의 뿌리 길이 생육에 관해서는 관주 시비구와 엽면 시비구의 차이를 확인하기 어려웠으며, 엽변 시비프로그램의 특성상 시비 횟수가 늘어나는 점에 대해서도 생각해 보아야 한다. 마지막으로, 토양 분석결과에서 시비 전후 토양의 화학성에 큰 변화가 없다는 점은 토양 염류의 축적이 예방된다는 측면에서 큰 장점이 될 수 있으나 양분의 결핍이 쉽게 올 수 있다는 점에서 위험 요인이 될 수도 있다. 본 연구를 통해, 국내에서도 엽면 시비를 보편적인 시비방법으로 정착시킬 필요성을 느끼며, 이를 위해서는 시비 횟수를 줄이는 것과 같은 실용성을 높이기 위한 추가 연구가 필요할 것이다.