• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.178-184
• /
• 2007

The EEG signal in general can be categorized as the Alpha wave, the Beta wave, the Theta wave, and the Delta wave. The alpha wave, showed in stable state, is the dominant wave for a human EEG and the beta wave displays the excited state. The subject of this paper was to recognize the stable state of EEG quantitatively using wavelet transform and power spectrum analysis. We decomposed EEG signal into the alpha wave and the beta wave in the process of wavelet transform, and calculated each power spectrum of EEG signal, using Fast Fourier Transform. And then we calculated the stable state quantitatively by stable state ratio, defined as the power spectrum of the alpha wave over that of the beta wave. The study showed that it took more than 10 minutes to reach the stable state from the normal activity in 69 % of the subjects, 5 -10 minutes in 9%, and less than 5 minutes in 16 %.

• Journal of IKEEE
• /
• v.12 no.4
• /
• pp.204-210
• /
• 2008

Generally, among the EEG signal, alpha wave is said to be strongly appeared in stable state and beta wave in active state. And in oriental medicine, it is said that relative long and regular respiration shows stable state rather than short and irregular respiration. In this paper, we tried to find out relation between respiration and EEG in stable state using quantitative parameters such as stable state ratio and equivalent ratio of respiration which was defined to indicate the degree of stable state quantitatively. And we verified our proposal by the real experiment for 20 persons.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.2
• /
• pp.119-127
• /
• 2023

In this paper, seismic performance evaluation was carried out for eight circular reinforced concrete columns designed seismically by KRTA[1]and KCI[8]. Primary design parameters for such columns included many longitudinal reinforcements, yield strength of reinforcements, the vertical spacing of spirals, aspect ratio, and axial force ratio. The test results showed that all the columns exhibited stable hysteretic and inelastic responses. Based on the test results, drift ratios corresponding to each damage state, such as initial yielding, initial cover spalling, initial core concrete crushing, buckling, and fracture of longitudinal reinforcement and final spalled region, were evaluated. Then, those ratios were compared with widely accepted damage limit states. The comparison revealed that the existing damage states were considerably conservative. This implies that additional research is required for the damage limit states of such columns designed seismically by current Korean design codes.

• Journal of applied mathematics & informatics
• /
• v.31 no.3_4
• /
• pp.385-398
• /
• 2013

In this paper, a turbidostat model with ratio-dependent growth rate and impulsive state feedback control is considered. We obtain sufficient conditions of the globally asymptotically stable of the system without impulsive state feedback control. We also obtain that the system with impulsive state feedback control has periodic solution of order one. Sufficient conditions for existence and stability of periodic solution of order one are given. In some cases, it is possible that the system exists periodic solution of order two. Our results show that the control measure is effective and reliable.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.6
• /
• pp.1847-1854
• /
• 2013

The main concern of this paper is to study the dynamics of an n-dimensional ratio-dependent predator-prey system with diffusion. We study the dissipativeness, persistence of the system and it is shown that the unique positive constant steady state is globally asymptotically stable under some assumptions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.91-98
• /
• 2007

This paper presents the induced mathematical modeling equations for evaluating the operation stability with automatic transmission of heavy duty vehicle. This theoretical approach indicates that linearized governing equations of system can be converted into eigen-value problems. if the eigen-value has positive number, we can predict the engine operating point locates an unstable operating region. To be a stable state, the unstable operating point diverges toward a stable point which is able to maintain uniform velocity. Based on the previous theoretical analysis, we carry out dynamic simulation to show the behavior of engine operating point and torque converter in transient state. As a result of the dynamic simulation, the suggested theoretical method is found to be reasonable for evaluating the operation stability of a torque converter. In addition, the numerical results explain the engine stops and fluctuating phenomenon in reality.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.66-72
• /
• 1999

It is necessary to discuss lightening engine parts and reducing the friction of sliding parts to improve fuel consumption and combustion stability at idling condition. Lean best torque combustion which produce maximum power at a lean air-fuel ratio is effective for the reduction of exhaust gas emission and the improvement of fuel consumption. Accordingly, this study deals with the expansion of lean combustible limitation, the combustion stability and the reduction of idle speed through the analysis of combustion characteristics on the base of the control technique of precise air-fuel ratio because it does not need to maximum power at idling condition. The idle speed is increased proportional to ISC(Idle Speed Control) duty ratio. On the other hand the idle speed decreased by lean air-fuel ratio. The COV in engine speed is stable within maximum two percent up to 17.6 mixture ratio by the control of ISC duty ratio.

• Wind and Structures
• /
• v.36 no.2
• /
• pp.91-103
• /
• 2023

Tuned liquid dampers (TLDs) are increasingly being used as efficient dynamic vibration absorbers to mitigate wind-induced vibration in super high-rise buildings. However, the damping characteristics of screens and the control effectiveness of actual structures must be investigated to improve the reliability of TLDs in engineering applications. In this study, a numerical TLD model is developed using computational fluid dynamics (CFD) and a simulation method for achieving the coupled vibration of the structure and TLD is proposed. The numerical results are verified using shaking table tests, and the effects of the solidity ratio and screen position on the TLD damping ratios are investigated. The TLD control effectiveness is obtained by simulating the wind-induced vibration response of a full-scale structure-TLD system to determine the optimal screen solidity ratio. The effects of the structural frequency, damping ratio, and wind load amplitude on the TLD performance are further analyzed. The TLD damping ratio increases nonlinearly with the solidity ratio, and it increases with the screens towards the tank center and then decreases slightly owing to the hydrodynamic interaction between screens. Full-scale coupled simulations demonstrated that the optimal TLD control effectiveness was achieved when the solidity ratio was 0.46. In addition, structural frequency shifts can significantly weaken the TLD performance. The control effectiveness decreases with an increase in the structural damping ratio, and is insensitive to the wind load amplitude within a certain range, implying that the TLD has a stable damping performance over a range of wind speed variations.

• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.305-310
• /
• 2005

Flaxseed is outstanding for lignans and oil rich in ${\alpha}$-linolenic acid which protect against several major illnesses. Better understanding of processing and storage characteristics of flaxseed will increase options for food use. Lignans and oil are found in the hull and embryo, respectively. Comparison of pearling and impact-dehulling processes for separation of lignan and oil-rich fractions showed the impact process was less effective, but easier to scale-up. Screw-pressing embryo reduced oil yield compared to whole seed, but doubled productivity and sharply reduced frictional heating of the oil. Flaxseed hull and embryo, also whole, ground and steamed-ground samples, were stable up to 30 weeks in closed containers at $23^{\circ}C$. Steamed-ground samples in open trays at $40^{\circ}C$ deteriorated markedly (peroxide value > 100 by 22 weeks); yet, whole seed remained stable. Incorporation of 18% flaxseed embryo into yellow perch feed increased ${\alpha}$-linolenic acid to 13 to l4% of muscle and liver lipids, compared to 0.5 to 0.7% in the no-embryo control. Feed conversion ratio, weight gain, and survival were similar. These studies are helping to establish the technological base for processing and utilizing flaxseed and flaxseed fractions to improve human diets.

• Ocean Science Journal
• /
• v.42 no.4
• /
• pp.223-230
• /
• 2007

To understand the origin and biogeochemistry of the organic matter in surface sediments of Lake Shihwa and Lake Hwaong, organic nitrogen, inorganic nitrogen, labile organic carbon, and residual organic carbon contents as well as stable isotope ratios for carbon and nitrogen were determined by KOBr-KOH treatment. Ratios of organic carbon to organic nitrogen $(C_{org}/N_{org})$ (mean = 24) were much higher than ratios of organic carbon to total nitrogen $(C_{org}/N_{tot})$ (mean= 12), indicating the presence of significant amounts of inorganic nitrogen in the surface sediments of both lakes. Stable isotope ratios for organic nitrogen were, on average, $5.2\%_{\circ}$ heavier than ratios of inorganic nitrogen in Lake Shihwa, but those same ratios were comparable in Lake Hwaong. This might be due to differences in the origin or the degree of degradation of sedimentary organic matter between the two lakes. In addition, stable isotope ratios for labile organic carbon were, on average, $1.4\%_{\circ}$ heavier than those for residual organic carbon, reflecting the preferential oxidation of $^{13}C$-enriched organic matter. The present study demonstrates that KOBr-KOH treatment of sedimentary organic matter can provide valuable information for understanding the origin and degradation state of organic matter in marine and brackish sediments. This also suggests that the ratio of $(C_{org}/N_{org})$ and stable isotope ratios for organic nitrogen can be used as indexes of the degree of degradation of organic matter.